Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Powerassist

Guest · 18 · 2767
« previous next »
Pages: 1   Go Down

Magic Bus

  • Guest
Powerassist
on: October 25, 2013, 11:55:33 AM
Here is my new to me PA, with huge thanks to John (kirk13). I realise these are not everybodys cup of tea but I love this thing  :D Here it is shown next to my Swisstool. The standard of finish is very high indeed and the whole tool feels high quality. The assisted opening took a moment or two to get used to but works as intended and interestingly there is next to no bladeplay which seems to have been widely reported. The cutters work well on both stranded and hard wire and overall what's not to like? It's quirky and different in a good way  :) On a side note it has hex bolts instead of the newer fasteners and a polished as opposed to satin finish. Would anyone be able to take a guess at age or country of origin?







us Offline ducttapetech

  • Zombie Apprentice
  • ********
    • Posts: 18,707
  • Whiskey Tango Foxtrot, over.
Re: Powerassist
Reply #1 on: October 25, 2013, 12:52:16 PM
I like it! Nice pics.

sent from my mobile

Nate

SEND IT!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread with a photo showing the axe in use Test,please ignore Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 1 MTO branded tool in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must buy something on EDCSource Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms)

ca Offline derekmac

  • *
  • Zombie Apprentice
  • ********
    • Posts: 16,707
  • Little to the right...
Re: Powerassist
Reply #2 on: October 25, 2013, 01:15:06 PM
I like the looks of the Power Assist. I wouldn't mind adding one to my collection.


Sent from my iPhone 5 using Tapatalk
Merit Badges Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Start a new thread demonstrating paracord knot tying Start a new thread and post a picture of fire making kit or fire with a multitool Must start a thread showing a photo of at least three BO tools Must start a thread with a photo of at least five (5) of your watches

Magic Bus

  • Guest
Re: Powerassist
Reply #3 on: October 25, 2013, 01:55:55 PM
Just one more pic  :)


dk Offline AHB

  • Keeper Of The PowerCut
  • Admin Team
  • Zombie Apprentice
  • *
    • Posts: 16,951
  • Don't mistake lack of talent for genius.
Re: Powerassist
Reply #4 on: October 25, 2013, 01:59:36 PM
Uhh nice one Chris, welcome to the wonderful world of SOGs.. :dd:  :D
Merit Badges Start a new thread with photos of a Japanese made PST in your collection Start a new thread with a photo of at least 5 different Charge models in your collection

hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,935
  • I may get older but I refuse to grow up.
Re: Powerassist
Reply #5 on: October 25, 2013, 02:02:24 PM
Looks relly nice. 8) Congrats. :2tu:

Very good pics too. :D
Merit Badges Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on the Multitool.org Multitool Encyclopedia Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must update or add a page on SAKWiki Start a thread with photos of at least 5 different Juice models in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must put something in order and provide link to the post.

Magic Bus

  • Guest
Re: Powerassist
Reply #6 on: October 25, 2013, 02:16:17 PM
Quote from: AHB on October 25, 2013, 01:59:36 PM
Uhh nice one Chris, welcome to the wonderful world of SOGs.. :dd:  :D

It's an unexpected addition to my little MT family and it has been referred to as a "red haired stepchild" that bites, but I like it  :D

au Offline TheDude

  • Hero Member
  • *****
    • Posts: 775
  • "What is the riddle of steel?"
Re: Powerassist
Reply #7 on: October 25, 2013, 06:05:35 PM
I'm waiting for one to come in the mail this week.
Eventually even McGyver got himself a Leatherman
Merit Badges Must buy something on EDCSource

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,516
Re: Powerassist
Reply #8 on: October 25, 2013, 06:13:03 PM
Quote from: Magic Bus on October 25, 2013, 02:16:17 PM
Quote from: AHB on October 25, 2013, 01:59:36 PM
Uhh nice one Chris, welcome to the wonderful world of SOGs.. :dd:  :D

It's an unexpected addition to my little MT family and it has been referred to as a "red haired stepchild" that bites, but I like it  :D

Hopefully the purification rites worked :think:
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Must start a thread with a photo of your EDC watch Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

Magic Bus

  • Guest
Re: Powerassist
Reply #9 on: October 25, 2013, 07:44:45 PM
Quote from: kirk13 on October 25, 2013, 06:13:03 PM
Quote from: Magic Bus on October 25, 2013, 02:16:17 PM
Quote from: AHB on October 25, 2013, 01:59:36 PM
Uhh nice one Chris, welcome to the wonderful world of SOGs.. :dd:  :D

It's an unexpected addition to my little MT family and it has been referred to as a "red haired stepchild" that bites, but I like it  :D

Hopefully the purification rites worked :think:

So far so good  :multi:  :)

gb Offline Cupboard

  • No Life Club
  • ******
    • Posts: 2,018
Re: Powerassist
Reply #10 on: October 25, 2013, 11:18:30 PM
Glad it's good a fan  :tu:

When I was playing with one at the meetup (John's?) I didn't really get on with it and found it a bit scary to use! By the time I'd taken the safety off and flicked the blade I might as well have just had a decent OHO blade.

00 Offline kirk13

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,516
Re: Powerassist
Reply #11 on: October 26, 2013, 12:11:16 AM
Quote from: Cupboard on October 25, 2013, 11:18:30 PM
Glad it's good a fan  :tu:

When I was playing with one at the meetup (John's?) I didn't really get on with it and found it a bit scary to use! By the time I'd taken the safety off and flicked the blade I might as well have just had a decent OHO blade.
Not sure whose you had Tom,but it wasn't this one...it was I a heap of bits at the time  :D
There is no beginning,or ending,and for this we are thankful,cos now is hard enough to understand!
Merit Badges Must start a thread with a photo of your EDC watch Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection

us Offline 3rdpig

  • Full Member
  • ***
    • Posts: 248
Re: Powerassist
Reply #12 on: October 26, 2013, 01:34:24 AM
Mine is very similar, polished like yours with the old hex bolts.  Unfortunately mine has a little blade play, not too much as the awful Power Duo does, but far more than I'd be happy with on a quality folding knife and more than the $30 made in USA Buck I just bought. 

I love showing off and playing with the PA, but when time comes to get to work it goes back into the box.

Mine's 4 or 5 years old I think and I'll bet a fiver that the country of origin is China, same as my PowerLock which is even a year or two older than that.

Do you intend using yours or is it just a showpiece?

gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Powerassist
Reply #13 on: October 26, 2013, 03:40:21 AM
Very nice chris  :tu:
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread with photos of your Mora knives in use Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

Magic Bus

  • Guest
Re: Powerassist
Reply #14 on: October 26, 2013, 06:38:38 AM
@3rdpig. Yes I'll use it  :)

us Offline 3rdpig

  • Full Member
  • ***
    • Posts: 248
Re: Powerassist
Reply #15 on: October 26, 2013, 08:59:23 AM
Quote from: Magic Bus on October 26, 2013, 06:38:38 AM
@3rdpig. Yes I'll use it  :)

I'd be very interested in your opinion after a few weeks of use.

Or even a 30 day challenge?

ph Offline Goatlord666

  • Hero Member
  • *****
    • Posts: 939
  • I am the ghost that haunts the GERBER MTo Forum
Re: Powerassist
Reply #16 on: October 26, 2013, 11:32:14 AM
Nice pics...I sold my black oxide power lock,  but I think I will get another one with the fuzewell spike

Sent from my Cruize W280 using Tapatalk

Cheers,
Gabriel

"you can't always get what you want, but sometimes you get what you need"


"I have a confession to make: I am addicted to steel, I have a smoking problem, I have a short attention span and I am easily amused"

"Balisongs Forever!!!"

Magic Bus

  • Guest
Re: Powerassist
Reply #17 on: October 26, 2013, 09:54:19 PM
Quote from: 3rdpig on October 26, 2013, 08:59:23 AM
Quote from: Magic Bus on October 26, 2013, 06:38:38 AM
@3rdpig. Yes I'll use it  :)

I'd be very interested in your opinion after a few weeks of use.

Or even a 30 day challenge?
I'll report back  :salute:

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $90.65
PayPal Fees: $5.47
Net Balance: $85.18
Below Goal: $214.82
Site Currency: USD
28% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal