Accessories for Boker Tech Tool outdoor 3

[Marc_in_NS]

Hello All,
I have recently purchased a Boker Tech Tool Outdoor 3 (Green G-10 handles). These knife have a configurable pocket clip. tip up or tip down etc. Which ever position you select leaves the other location with a blank or a divot. I have seen some very cool inserts, in pictures, that can be fitted to the opposite (un used) position.

So basically looking for an insert, something decorative, cool or whatever to fill that space.

[Dean51]

I'd be tempted to find a used butter/table knife and just make a stainless insert.

[Marc_in_NS]

I'd be tempted to find a used butter/table knife and just make a stainless insert.

Dean, that's one approach...

[Marc_in_NS]

[Old Boy]

I'm fresh out of ideas, but if you could have the insert serve a secondary function I think you would not regret it.

[Marc_in_NS]

Old Boy...

[Marc_in_NS]

Thank you for the replies so far. Both seem to head towards DIY or fabricating my own.
I have seen some pictures on various threads depicting such inserts with decorative art on them...any source?

[Gareth]

Sorry to say I've not seen the inserts you're talking about, got a link?  I really like my Boker as well and would be very interested to have a look at some inserts.

[Marc_in_NS]

All I can find or come up with is inserts or so-called "Filler Tabs" for the Hinderer series of knives. As per Photo...

[Gareth]

They're pretty cool.   I'll keep an eye open for something like that for the Boker.  In the meantime the only thought I had was to see if you could get hold of a spare pocket clip and cut away the actual clip part just leaving the insert.

[Marc_in_NS]

That also sounds good...
I think between you and the other fellas, above, I might have to turn on the furnace in the shop!!!
 

[Marc_in_NS]

Of course, the Boker Outdoor comes in green G10 Handles... copper or brass would enhance that Boker quite nicely!!!