New Limited Charge for 2009

hawkchucker · **Reply #30 on:** January 18, 2009, 09:49:13 PM

No way actually int he first pic it looked more like a gun metal greay polished to me. But I think it is still sexy.

J-sews · **Reply #31 on:** January 18, 2009, 10:05:50 PM

Quote from: dunc5 on January 18, 2009, 09:19:16 PM

Bob I reckon you already have one on order Infact I reckon you have got Def to pick you one up .

Come on be honest Do you have one on the way ?

Dunc

Not yet.

DaveK · **Reply #32 on:** January 18, 2009, 10:07:44 PM

Whilst it's all very pretty, I doubt I'd be parting with that much cash for it.

I may steal one though!

Benner · **Reply #33 on:** January 18, 2009, 11:43:36 PM

Quote from: DaveK on January 18, 2009, 10:07:44 PM

Whilst it's all very pretty, I doubt I'd be parting with that much cash for it.

I may steal one though!

Watch out Bob!

glorn · **Reply #34 on:** January 19, 2009, 01:02:32 AM

I'd like to buy one and use it at the beach. Get lots of sand in it, maybe let it air dry after a good salt water soak and some fish gutting.

Use the blades as screwdrivers.. or to scrape paint of an old boat.

gafftapegreenia · **Reply #35 on:** January 19, 2009, 01:18:17 AM

Quote from: glorn on January 19, 2009, 01:02:32 AM

I'd like to buy one and use it at the beach. Get lots of sand in it, maybe let it air dry after a good salt water soak and some fish gutting.

Use the blades as screwdrivers.. or to scrape paint of an old boat.

So basically, treat it like everyone else without our "sickness" does?

J-sews · **Reply #36 on:** January 19, 2009, 01:24:03 AM

Quote from: glorn on January 19, 2009, 01:02:32 AM

I'd like to buy one and use it at the beach. Get lots of sand in it, maybe let it air dry after a good salt water soak and some fish gutting.

Use the blades as screwdrivers.. or to scrape paint of an old boat.

Bah, the damascus model is much too crude for such work. Better grab a new Charge Del Ray instead!

glorn · **Reply #37 on:** January 19, 2009, 02:57:46 AM

Psh... I'm gonna buy the Del Ray and the Damascus. Then I'm gonna take them both apart without being careful and make a new modded version with only the most expensive bits of each. By the time I am done it will be a terribly scratched $40,500 original one of a kind.

Then I am going to give it to a 14 year old to use on his BMX bike.

hawkchucker · **Reply #38 on:** January 19, 2009, 10:54:07 AM

Quote from: glorn on January 19, 2009, 02:57:46 AM

Psh... I'm gonna buy the Del Ray and the Damascus. Then I'm gonna take them both apart without being careful and make a new modded version with only the most expensive bits of each. By the time I am done it will be a terribly scratched $40,500 original one of a kind.

Then I am going to give it to a 14 year old to use on his BMX bike.

Now that is the definition of a user!!

Craig · **Reply #39 on:** January 19, 2009, 09:57:31 PM

The gold on that Del Rey is only 18 carat! Honestly, no class at all

J-sews · **Reply #40 on:** February 02, 2009, 05:10:58 AM

Quote from: Defender on January 17, 2009, 05:34:25 AM

Pretty sweet looking with damascus blades!

(Image removed from quote.)

MSRP is about $500 I think...

Def

Been almost a week since I cast my gaze upon its loveliness...

Sean · **Reply #41 on:** February 02, 2009, 05:22:25 AM

Quote from: zepla on January 17, 2009, 01:06:05 PM

That looks cool indeed! I've seen damascus steel before on some knifes. I do not know anything about damascus but are you paying just for the looks or is is good steel?

well...
to me it wouldn't matter if it is good steel or not, gauging from the looks of it, it wouldn't get used as a tool, it'd just get "pulled open everyday and fondled and admired"

sean

Grant Lamontagne · **Reply #42 on:** February 02, 2009, 07:55:47 PM

Quote from: J-sews on February 02, 2009, 05:10:58 AM

Quote from: Defender on January 17, 2009, 05:34:25 AM
Pretty sweet looking with damascus blades!

(Image removed from quote.)

MSRP is about $500 I think...

Def

Been almost a week since I cast my gaze upon its loveliness...

So how about some more pictures then?

Def

Rob · **Reply #43 on:** February 02, 2009, 08:49:36 PM

If anybody seriously wants one I can call to see about availability. Cost would be quite a bit less than list which is $550. It won't be cheap though since my cost is still crazy high with it being a limited edition item.

Rob

J-sews · **Reply #44 on:** February 03, 2009, 04:14:29 AM

Quote from: Defender on February 02, 2009, 07:55:47 PM

Quote from: J-sews on February 02, 2009, 05:10:58 AM
Quote from: Defender on January 17, 2009, 05:34:25 AM
Pretty sweet looking with damascus blades!

MSRP is about $500 I think...

Def

Been almost a week since I cast my gaze upon its loveliness...

So how about some more pictures then?

Def

Bring 'em on man!

Grant Lamontagne · **Reply #45 on:** February 03, 2009, 04:19:10 AM

I thought you meant you had one and it arrived a week ago!

Def

J-sews · **Reply #46 on:** February 03, 2009, 04:39:20 AM

Quote from: Defender on February 03, 2009, 04:19:10 AM

I thought you meant you had one and it arrived a week ago!

Def

I wish $:-\$

Now do you have some more pictures or dontcha?

zepla · **Reply #47 on:** February 03, 2009, 12:10:05 PM

Quote from: eLEATHERMAN.com on February 02, 2009, 08:49:36 PM

If anybody seriously wants one I can call to see about availability. Cost would be quite a bit less than list which is $550. It won't be cheap though since my cost is still crazy high with it being a limited edition item.

Rob

Well, how much is it than? And of course you should use it, it is a MT isn't it? I'll use it! That's why I was interested if the steel is any good.

Rob · **Reply #48 on:** February 03, 2009, 08:56:21 PM

I was told yesterday they will start shipping in March.

zepla · **Reply #49 on:** February 08, 2009, 05:27:06 PM

Not for free I guess, and not for $500,- as I understand it? $?

Rob · **Reply #50 on:** March 04, 2009, 09:56:39 PM

I found out today these are going to start shipping March 9th. Let me know if anyone wants to get in line for one so I can get an order placed.

Springs420 · **Reply #51 on:** March 12, 2009, 06:24:04 AM

These look quite tasty... I may just have to find myself one of these...

Springs

prime77 · **Reply #52 on:** March 31, 2009, 05:58:07 AM

It's available Here

donvito · **Reply #53 on:** March 31, 2009, 07:23:34 AM

Rob go em at $100 less on his site http://www.eleatherman.com/index.php?main_page=product_info&cPath=1&products_id=102

AndyTiedye · **Reply #54 on:** March 31, 2009, 08:09:57 AM

At that price it starts to become rather tempting.

If there were any discount codes that would reduce the price further, I likely would not be able to resist.

zepla · **Reply #55 on:** March 31, 2009, 12:33:49 PM

I'll start sdaving up money in these crisis times

Nikos · **Reply #56 on:** March 31, 2009, 12:35:33 PM

Heh... For that price I'd just buy a couple of TTi's and trade them for all of the current and future LM123's SAK collection...

Benner · **Reply #57 on:** March 31, 2009, 12:58:00 PM

Quote from: noth on March 31, 2009, 12:35:33 PM

Heh... For that price I'd just buy a couple of TTi's and trade them for all of the current and future LM123's SAK collection...

Rob · **Reply #58 on:** March 31, 2009, 10:51:27 PM

They're here......

And it comes with a wicked cool sheath as well.

Dang you guys are fast I only marked this in stock late last night but didn't check them into stock until right now. The price went up quite a bit due to shipping and insurance rates being way higher than I would have expected. There is a still a $25 off MT.org coupon which is only good for this item. As of right now I think there are only 2 not spoken for but will know for sure in a few days.

Rob

Leatherman123 · **Reply #59 on:** April 01, 2009, 12:20:16 AM

Are the sheaths going to be available separately?

''

Also, does a BO Charge AL exist? Thanks

Hello Lurker! Remove this ad and much more by logging in.

New Limited Charge for 2009

Donations

Community Links