Got 3 new SAKs
-
Hey guys, ive got 3 saks comming in, and im going to learn how to mod them. All three are Cimbers, so im not totally sure what to do with them. I was thinking maybe a take the best parts to make a new Climber, and a Spartan. But nothings set in stone, so what do you guys think I should do? Mecha Climber, with 2 awls and 3 siccors?
-
Since this is your start into modding, I would start with a Spartan (nice SAK to own regardless). Thinner ones are a bit easier to manage. After that, you could rebuild a Climber. Or look for more donors on ebay for other parts to add to the Climber frame.
Actually, I could probably find a saw layer or something to send you if you're interested. Let me know.
-
@eddie1115 said:
Since this is your start into modding, I would start with a Spartan (nice SAK to own regardless). Thinner ones are a bit easier to manage. After that, you could rebuild a Climber. Or look for more donors on ebay for other parts to add to the Climber frame.Actually, I could probably find a saw layer or something to send you if you're interested. Let me know.
Id be very interested, thank you. The saws on my leathermans get a ton of use, and I was hoping to get a SAK with a saw to compare it with, you know, for science. This way I could make my own!
-
Sure thing! If you PM me your address I can send you some stuff.

-
If you have a saw you could buy a waiter from eBay and make a Lumberjack then make a Gourmet out of the waiter parts and have two nice discontinued SAKs. When I mod SAKs I usually try to make hard to get discontinued models or a customs that suit my needs. Have fun take your time. It is a fun hobby.
-
Actually, I was thinking of making a Compact with a modified bottle opener instead of the combo tool, or, if that does not pan out, ill change the small blade into a serrated blade (in case I cannot make the bottle opener fit). I'm also thinking of making some wood scales, and I'm going to try experimenting with making the main blade One Hand Opening
-
I think back in the day Spork made a one hand opening SAK it was on the old SAK forum. I wish we still all his old SAK mod write ups.
-
@Mike 56 said:
I think back in the day Spork made a one hand opening SAK it was on the old SAK forum. I wish we still all his old SAK mod write ups.This one maybe? http://www.swissarmyknights.com/articles/2005/97-oh-waiter-mod
-
Thank you Z Man you rock that was it I thought all that stuff was lost for ever. Spork had posted a lot of cool mods.
-
That looks real nice, I was thinking of doing sonething along the same lines, but with a more agressive cutout, so I can OHO the knife without a thumbstud. That way I can keep a couple layers in the knife. I may cut a small thumbhole in the blade to get more purchase
-
I would scour ebay for more donor SAKs. You know, the ones with blades that have been sharpened on bench grinder, but the rest of the tools still good.
Maybe a Tinker, and make a Super Tinker.
Another mod I thought about (and attempted once) was to make the bottom part of a Vic can opener into a pull cutter. But I made the mistake of cutting off the lower hook portion, which ruined it. (it falls all the way into the frame then) Sharpening it will take a steady hand with a dremel and then maybe some fine stone or file work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login