New SOG (2017) - Initial thoughts
-
@50ft-trad said:
I'm surprised Nate (DTT) hasn't popped in here with some comments yet. He's a big SOG fan, so I thought he'd have some input on all this. I wonder where he's hiding?
Nate?
Thoughts?I'm here Al!
@Grant Lamontagne said:
Last I heard, Nate was interviewing new Shop Toad Interns.Seriously, that actually looks pretty darned sweet, and I am really looking forward to it.
Def
No luck with a new Shop Toad since she passed. I don't get it, I offer free beer, room and board and full use to all of the tools in my shop. All they have to do is get petted and take a pic every once in awhile.

I am really digging the Power Grab. Love how the use the plier pivots as the gear covers. Very nice touch on that. Also liking the new blade. Phipps drive seems like it might work better than the old one and love that SOG is still using standard bits. SOG patch stamped on the handle gives it a nice touch, but that is just visual.
@chrono said:
What interest me are those Kiku folders. VG-10 steel may indicate Seki-made :ahhhIf it is the same VG-10 that is used in the Vulcans, it should be Seki. While I always preferred carbon to stainless, VG-10 is an awesome steel. Gets very sharp and holds an edge for a long time and does not seem to take forever to sharpen. One of the best stainless in my book. Speaking of knives, they have a few folders and a couple of fixed blades that I wouldn't mind having.

-
It's Nate! 
Thanks for stopping by mate.

Sorry about Shop Toad. I think I may have missed that news.
I don't want to burst your bubble, but I think that new Phillips is only available on the PowerAssist. It looks like the PG retains the disappointing old style one.
-
When will be out these new models?
-
@50ft-trad said:
It's Nate! 
Thanks for stopping by mate.

Sorry about Shop Toad. I think I may have missed that news.
I don't want to burst your bubble, but I think that new Phillips is only available on the PowerAssist. It looks like the PG retains the disappointing old style one.
Yeah, we was both away for quite awhile. Life has a way of throwing a monkey wrench into the works and smurfing things up. Glad you are back Al.
Hmmmm, my Power Assist has the old type. But that might because it is an older one. It does ok but I wish it was a number 2 instead of a number 1.
-
Sorry Nate - I had a brain fart there. I meant to say PowerACCESS. It seems that it might be a better profiled driver than the old one.
-
-
So we might see some user reviews by June or July
That's a long time to wait to see how far off the mark I am with some of my comments :ahhh -
Last year, the Reactor and PowerPlay were released in February. So, maybe...

-
I've sent a message off to SOG to see what they have to say about release dates.
Def
-
I dont think I can wait until June....
Ive never purchased a NIB multitool for myself. The PowerAccess may change that.
-
@sLaughterMed said:
I dont think I can wait until June....Ive never purchased a NIB multitool for myself. The PowerAccess may change that.
If that isn't high praise I don't know what is!
Def
-

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
Inboard Tools VS Outboard Tools
Ph2 and 2x flat drivers VS Ph1 and 4x flat drivers
Saw and serrated blade VS central 1/4" hex driver and protractor
Lanyard ring and sheath VS pocket clip (no sheath)
$60.85 list price VS $67.00 list price
-
@50ft-trad said:

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
I think PowerAcess wins here. Compound leverage is a huge plus to me, and the replacable wirecutters were never all that special
Inboard Tools VS Outboard Tools
PowerAcess, no contest, outboard is vastly superior for almost all tasks, and makes the pliers more comfortable to use.
Ph2 and 2x flat drivers VS Ph1 and
4x3x flat drivers
[\quote]
I think Rebar wins here. PH2 (especially one that also works on PH1) is just much more useful than the small driver.[Quote]
Saw and serrated blade VS central 1/4" hex driver and protractorSigh. Rebar again, because lets face it, if im pocket carrying, I wont have a bit kit. I wish something else had gone here, but its hardly bad just because I wont use it.
Lanyard ring and sheath VS pocket clip (no sheath)
[\Quote]
PowerAcess. I wish the clip wasnt so large, but I dislike sheath carry.
[Quote]$60.85 list price VS $67.00 list price
Rebar.
Totals:
Rebar: 3
PowerAcess: 3smurf.
-
I think a lot of people would echo your feelings there. As for the bit kit, with the amount of flat blades on there, plus the smaller Phillips, many people would probably be fine with just a long Ph2 bit, which you could just keep in your wallet if you needed to.
-
@50ft-trad said:

VS

Replaceable cutters VS Compound leverage and unimpeded gripping area
Inboard Tools VS Outboard Tools
Ph2 and 2x flat drivers VS Ph1 and 4x flat drivers
Saw and serrated blade VS central 1/4" hex driver and protractor
Lanyard ring and sheath VS pocket clip (no sheath)
$60.85 list price VS $67.00 list price
Just a few observations on this particular head to head matchup:
The 2x Flat drivers are dedicated flatheads on the Rebar, while half the 4x Flat Drivers on the SOG are integrated into other tools.
The folding lanyard ring on the Rebar is also quite awful, and is sheet metal so any lanyard is not likely to survive any length of time. And, the sheath issue is easily fixed since you can always buy a sheath to go with it.
I really hate folding lanyard rings. The LM ones are flimsy and sharp and the Gerber ones are really thick and take up too much space. Thankfully at least Gerber has had the sense to stop putting them on tools.
Def
-
I've been closely examining the Powergrab and a few things to note
-
The screws that hold the internal tools together are regular torx screws. Which imo means the inner tools will be somewhat interchangeable. Which would be great because I hate sog scissors and the file is not great by any means. I've emailed sog about this but so far no response. If the possibility is there to custom, then

-
The tabs on the side are new lock styles for sog. If you zoom in you can see a small unlock icon on the side. I've attached a pic below. Thank god they didn't use the awful studs from the powerplay. That would immediately turned me off of this tool. Another win....if they work

-
With all of these things in mind, I'm actually hoping this is the new successor to the Powerlock. I enjoy using my PL but it has one huge fault...flimsy covers
The powergrab is really looking like a winner, it's like they used the powerplay as a pilot tool and this is their ace.
-
-
That is very interesting- I hadn't looked that closely at it, but that is one of the things I love about this forum! Nothing gets past MTO members! :D
Def
-
I thought 50ft had already established those were locks....

I am going to have to change my opinion though, initially I thought those were plenty robust for lock releases, but now that Demel has posted that close up, I'm beginning to have my doubts. That is one thin piece of metal going from the loop to the locks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






