Powerlock 30-day challenge
-
Day 05:
I got the chance to head up into the hills to do a little fishing today.......

Really nice day and not too hot. I headed for a stream where I've been successful before. I knew the water would be high and feared it would be muddy from all the recent rain, but it looked pretty good:

While I remembered the Powerlock, I forgot to bring the insect repellent. This would prove to be a major oversight......

Because I anticipated high water and muddy conditions, I decided to bring a spinning rod. This was not the best choice. While I got a few nice casts in and hoped for a result.....I got skunked.
Part of my failure was due to poor gear selection, but part was also due to an active and continual running battle with a horde of mosquitoes. I tried to cover up, but they exploited any opening. When they decide to try crawling up my nose, I made a tactical withdrawal and tried to make it back to the truck.
On my way, I ran into a barbed wire entanglement, clearly designed to entrap the unwary fisherman, leaving said poor soul to the merciless mosquitoes.

I have to say the Powerlock was impressive in cutting the wire fairly easily. I don't think I've had another multitool cut double-stranded barbed wire as easily as the Powerlock.

Once cleared of the barbed wire, I made my way back to the truck and headed home. Bruised, bloodied, and humiliated, but now with a new bottle of DEET.

-
That sounds like a terrible fishing excursion! I hope your next fishing trip goes better. :ahhh
At least the PL didn't let you down when you needed it. :-\
-
Any day fishing is a good day.

But, yeah, next time, mosquito repellent.

-
it seems that you went fishing but the mosquitoes ended up fishing you! :ahhh
SOGs C.Leverage and wire cutters are really good, the main attractive if SOG tools IMO.
-
I'd agree with that--all that--at that moment...... :D
-
Great you could cut that barbed wire Nix

-
Thanks, W.
I really like this test for a multitool's cutters. Separates the posers from the performers.
-
Great question! Thanks for the reminder.

I guess I didn't post up a pic of that test. But, YES!
These snips cut 44#, 30#, 15#, 10#, and.....slender 3# mono-filament fishing line.
I figured that the bigger stuff would not be an issue. I doubted the 3# would be cut, as it is soooooo fine and flexible. But the snips cut that quite nicely, too.
So far, the Powerlock's wire cutters have been excellent.

-
Nice one Nix

So far so good than :D
-
Day 06:
No uses today (so far). Powerlock has been riding around on my belt in it's sheath, Vic Classic in my pocket (no uses for that today either). So far I like this sheath fairly well.


-
Whenever I see a PowerLock or Assist, I ask myself "why does SOG bother making stuff like the PAD, if it is going to have to compete with the superior PL?"

-
I hear ya.
The PAD is packed with features and tools. That's nice. And the compound mechanism of the PAD is more elegant than the Powerlock's shrouded approach. That's nice, too.
In my case, if the quality of the PAD was up at the Powerlock level, I think the PAD might be the superior tool, but right now, I like the Powerlock much better for it's fit, feel, and function (yeah, I did have some issues with the scissors, but a bit of peening seems to have improved those.).
-
I feel that it's like SOG should learn a thing or two from Victorinox ,

**1 - **you should wait enough (1, 5 or 10 years) to put out and release a new tool that beats or improves your previous offerings,
if the tool you're releasing doesn't have an alternative use or completely different function than the previous ones, and it's just meant to be the evolution of those, it should be better or at least improved in some obvious upgrades 
I feel like SOG is worsening their lineup, not the opposite, and they trust the "lots of new releases in short time" model of business to be successful,
thus making quality and reputation suffer :ahhh2 - learn how to make scissors if you're gonna put them on your tools! In all sizes and versions, scissors should cut things!!!

-
Well said TP

-
+1.

-
Day 07:
Did a little cut testing today:

The Powerlock's blade did a nice job with all these cuts. However, when I examined the edge afterward, I noted that the edge had rolled, quite significantly. Not good.
I re-cut the same materials with a Buck 110 with a 420HC blade and got similar results, but WITHOUT edge rolling.
This suggests to me that while the SOG's blade geometry is good, they haven't made the most of their blade materials and heat treatment.
sigh

-
The good side of soft steel is that it sharpens up easily.
This blade is ground thin and is very flexible. It's not a 'hard use' blade to be sure. Feels like I could snap it easily (with my gorilla-strength grip
).So, I suspect that's why the steel is soft and the edge rolls: a harder steel would be more prone to snapping. (And more returns to the warranty department.)
I'm going to keep an eye on the knife blade, here. Right now, I'm a bit underwhelmed, despite some decent cutting test results.
-
In my experience yes,
SOG's multitool blades have very soft steel :ahhh :P -
Day 08:
No uses today....so far. I will say that at this point in the challenge I have become quite used to having the Powerlock on my belt. It does not feel as big or heavy to me as a Leatherman ST300.
Maybe that just means I need to do a ST 300 challenge......


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
