Powerlock 30-day challenge
-
I'd agree with that--all that--at that moment...... :D
-
Great you could cut that barbed wire Nix

-
Thanks, W.
I really like this test for a multitool's cutters. Separates the posers from the performers.
-
Great question! Thanks for the reminder.

I guess I didn't post up a pic of that test. But, YES!
These snips cut 44#, 30#, 15#, 10#, and.....slender 3# mono-filament fishing line.
I figured that the bigger stuff would not be an issue. I doubted the 3# would be cut, as it is soooooo fine and flexible. But the snips cut that quite nicely, too.
So far, the Powerlock's wire cutters have been excellent.

-
Nice one Nix

So far so good than :D
-
Day 06:
No uses today (so far). Powerlock has been riding around on my belt in it's sheath, Vic Classic in my pocket (no uses for that today either). So far I like this sheath fairly well.


-
Whenever I see a PowerLock or Assist, I ask myself "why does SOG bother making stuff like the PAD, if it is going to have to compete with the superior PL?"

-
I hear ya.
The PAD is packed with features and tools. That's nice. And the compound mechanism of the PAD is more elegant than the Powerlock's shrouded approach. That's nice, too.
In my case, if the quality of the PAD was up at the Powerlock level, I think the PAD might be the superior tool, but right now, I like the Powerlock much better for it's fit, feel, and function (yeah, I did have some issues with the scissors, but a bit of peening seems to have improved those.).
-
I feel that it's like SOG should learn a thing or two from Victorinox ,

**1 - **you should wait enough (1, 5 or 10 years) to put out and release a new tool that beats or improves your previous offerings,
if the tool you're releasing doesn't have an alternative use or completely different function than the previous ones, and it's just meant to be the evolution of those, it should be better or at least improved in some obvious upgrades 
I feel like SOG is worsening their lineup, not the opposite, and they trust the "lots of new releases in short time" model of business to be successful,
thus making quality and reputation suffer :ahhh2 - learn how to make scissors if you're gonna put them on your tools! In all sizes and versions, scissors should cut things!!!

-
Well said TP

-
+1.

-
Day 07:
Did a little cut testing today:

The Powerlock's blade did a nice job with all these cuts. However, when I examined the edge afterward, I noted that the edge had rolled, quite significantly. Not good.
I re-cut the same materials with a Buck 110 with a 420HC blade and got similar results, but WITHOUT edge rolling.
This suggests to me that while the SOG's blade geometry is good, they haven't made the most of their blade materials and heat treatment.
sigh

-
The good side of soft steel is that it sharpens up easily.
This blade is ground thin and is very flexible. It's not a 'hard use' blade to be sure. Feels like I could snap it easily (with my gorilla-strength grip
).So, I suspect that's why the steel is soft and the edge rolls: a harder steel would be more prone to snapping. (And more returns to the warranty department.)
I'm going to keep an eye on the knife blade, here. Right now, I'm a bit underwhelmed, despite some decent cutting test results.
-
In my experience yes,
SOG's multitool blades have very soft steel :ahhh :P -
Day 08:
No uses today....so far. I will say that at this point in the challenge I have become quite used to having the Powerlock on my belt. It does not feel as big or heavy to me as a Leatherman ST300.
Maybe that just means I need to do a ST 300 challenge......


-
I've had similar experiences with SOG MT blade steel. It is about as soft as Vic blade steel. I don't mind though, because like you said, less likely to snap. And, like a SAK, it is crazy easy to sharpen. :)
LM and Gerber blades are not forgiving at all when flexed. I know this the hard way.
-
Day 09:

Explanation: I was transferring some lentils from a bag to a better storage system (recycled jar). I used the Powerlock's scissors to snip off the corner of the bag, so as to use the clipped corner as a funnel. Scissors (now peened) worked fairly well and cut through 98% of the bag before it folded over. Last 2% was torn off with the bag clamped in the scissors.
Not perfect, but OK-ish.
-
That’s a bit disappointing

Are the scissors sharp enough
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

