Seeking Rebar modding advice.
-
You guys seem rather enthusiastic about Loki’s wrenches. :D
-
I don’t know of anyone else making these wrenches
So loki-mobile has got the best wrenches that are available
-
@Don Pablo said:
You guys seem rather enthusiastic about Loki’s wrenches. :D
I was until mine stripped out completely. Engineer pliers for me.
Is there any good write up on taking a Rebar apart?
Sent from my iPhone using Tapatalk
-
This one is worth a look: /topic/37322
-
@Don Pablo said:
You guys seem rather enthusiastic about Loki’s wrenches. :D
I was until mine stripped out completely. Engineer pliers for me.
Which one stripped out, if it was an early 4 way one and the PST size loki will likely send you a replacement. I have one and I guess the PST size was slightly oversized which would cause it to slip. loki sent me a replacement.
-
1st “mod”.......angle-grinderfabulous knife delete..so now it is at least legal to carry in public, and this still was more feasible than paying 25€ more for the “knifeless” model, even though it was a mentally painful thing to do.


Anyway...
A post in Antti Lammi’s “Tool test” thread made me think twice about adding a 2D bit adaptor to my Rebar.The Rebar has the 3D bit extender, which is great in itself, but is also comparable with leathermans bit extender. The bit extender can be found for like 20-25€.
Where as buying a set of Loki’s wrenches + bit adaptor parts adds up to around 40€, so almost twice as much.
What are your guys thoughts / opinions on this?
A): save money and go for LMs bit extender, and opt for 3D bits compatibility
B): pay more and go for Loki wrenches + 2D bit adaptor parts and be compatible with both 2D and 3D bits
Sent from my iPhone using Tapatalk
-
Ouch - my eyes :D
Do remember that Loki's wrenches will be useful more than once. I never regret buying mine. I see a lot of modding in your future.
On the 2D bit driver for the Rebar, I've done this too, making the Rebar VX a carry option (even pocket carry) without needing to carry the removable bit driver separately, or necessarily all the bits. On the other hand leaving the Phillips in gives you the option of using normal 1/4" bits if you carry the removable bit driver. Whatever you think suits you best...
-
@Dutch_Tooler said:
Ouch - my eyes :DI know....almost brought tears in my eyes to do too. But it would be no good to me if I can't carry it on a regular basis and would just lay around the house somewhere.
The laws here are so strict that you are looking at upwards of 5000 euro fines and it can actually lead to jail time if you are caught carrying a knife in public as well.
So I had to do, what I had to do.....definitely not that I am proud of it...more like the opposite

@Dutch_Tooler said:
Do remember that Loki's wrenches will be useful more than once. I never regret buying mine. I see a lot of modding in your future.On the 2D bit driver for the Rebar, I've done this too, making the Rebar VX a carry option (even pocket carry) without needing to carry the removable bit driver separately, or necessarily all the bits. On the other hand leaving the Phillips in gives you the option of using normal 1/4" bits if you carry the removable bit driver. Whatever you think suits you best...
Yeah...decisions...decisions :ahhh
What I really like about the 2D bits; is that you can carry pretty much the amount of bits in the same amount of space (e.g. pouch) as with 3D bits, and in 90% of cases; 2D bits does the job just fine, it's usually only the really stubborn or rounded out screws that the 2D bits struggle with.
With that said, 2D bits are expensive, scarce and easily lost, where as any hardware store has 3D bits and a whole set of them including Phillips, Flatheads, Torx, Hex etc. for under 10 Euro.....I have been using the same 5 Euro bit set I bought on Amazon for over a year now, with no problems or any signs of heavy wear....but when they break or gets lost, I'm not going to cry or be sad about it either as it will be no problem to get a new set of 3D bits.
-
No one else have any thoughts / opinions on the matter, that they want to share?

Sent from my iPhone using Tapatalk
-
I removed the blade from my
LM Crunch for the same reason
With the knife law in the UK
-
No one else have any thoughts / opinions on the matter, that they want to share?

Sent from my iPhone using Tapatalk
Don't feel bad about the blade and go with the bit extender and 3d bits.


@Wspeed said:
I removed the blade from my
LM Crunch for the same reason
With the knife law in the UK
Yeah, I can imagine the Laws in the UK are very similar to Ireland. So I'm sure you can relate...and without looking into it, I'm sure that most EU countries follow a similar pattern?
But basically here they narrow down to "any knife carried in any public place" = Possible jail time and up to a 1000 pounds (not 5000 euro as a wrote earlier), UNLESS! ...you can provide a "good reason" for carrying it at that time. E.g. if you are a carpenter carrying a utility knife.
Knife law is defined in the firearm and offensive weapons act of 1990. PART III OFFENSIVE WEAPONS PART III Offensive Weapons Possession of knives and other articles.
9.—(1) Subject to subsections (2) and (3), where a person has with him in any public place any knife or any other article which has a blade or which is sharply pointed, he shall be guilty of an offence.
(2) It shall be a defence for a person charged with an offence under subsection (1) to prove that he had good reason or lawful authority for having the article with him in a public place.
(3) Without prejudice to the generality of subsection (2), it shall be a defence for a person charged with an offence under subsection (1) to prove that he had the article with him for use at work or for a recreational purpose.
(4) Where a person, without lawful authority or reasonable excuse (the onus of proving which shall lie on him), has with him in any public place - (a) Any flick-knife, or (b) Any other article whatsoever made or adapted for use for causing injury to or incapacitating a person, He shall be guilty of an offence.
(5) Where a person has with him in any public place any article intended by him unlawfully to cause injury to, incapacitate or intimidate any person either in a particular eventuality or otherwise, he shall be guilty of an offence.
(6) In a prosecution for an offence under subsection (5), it shall not be necessary for the prosecution to allege or prove that the intent to cause injury, incapacitate or intimidate was intent to cause injury to, incapacitate or intimidate a particular person; and if, having regard to all the circumstances (including the type of the article alleged to have been intended to cause injury, incapacitate or intimidate, the time of the day or night, and the place), the court (or the jury as the case may be) thinks it reasonable to do so, it may regard possession of the article as sufficient evidence of intent in the absence of any adequate explanation by the accused.
(7) (a) A person guilty of an offence under subsection (1) shall be liable on summary conviction to a fine not exceeding £1,000 or to imprisonment for a term not exceeding twelve months or to both.
(b) A person guilty of an offence under subsection (4) or (5) shall be liable— (i) On summary conviction, to a fine not exceeding £1,000 or to imprisonment for a term not exceeding twelve months or to both, or (ii) On conviction on indictment, to a fine or to imprisonment for a term not exceeding five years or to both.
(8) In this section “public place” includes any highway and any other premises or place to which at the material time the public have or are permitted to have access, whether on payment or otherwise, and includes any club premises and any train, vessel or vehicle used for the carriage of persons for reward.
(9) In this section “flick-knife” means a knife— (a) Which has a blade which opens when hand pressure is applied to a button, spring, lever or other device in or attached to the handle, or (b) Which has a blade which is released from the handle or sheath by the force of gravity or the application of centrifugal force and when released is locked in an open position by means of a button, spring, lever or other device.
Source: http://www.irishstatutebook.ie/1990/en/act/pub/0012/sec0009.html#zza12y1990s9
So yeah, the knives had to go in one way or the other. I haven't removed the Awl, because technically its not a "knife or any other article which has a blade or which is sharply pointed".
I have never been stopped or searched by the police here knock on wood, but I don't want to risk anything either.
-
@Don Pablo said:
You guys seem rather enthusiastic about Loki’s wrenches. :D
I was until mine stripped out completely. Engineer pliers for me.
Which one stripped out, if it was an early 4 way one and the PST size loki will likely send you a replacement. I have one and I guess the PST size was slightly oversized which would cause it to slip. loki sent me a replacement.
It was the first set.
-
My adapter for Rebar, i recommend that you go for 3d adapter cause it gives more compatibility. Dont mind blade if its not really necessary for you or you carry something else what has blade.


Only Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

(partially) ;)