March SWISSTOOL Madness
-
Happy birthday Rizio!
[It's not failure if you learn something from it]
-
Day 10 - I tried to use the saw but I had to use the bigger gasoline brother or I will saw until end of days

[It's not failure if you learn something from it]
-
Many thanks indeed, everyone! As promised, I’ve had a go at jazzing the new Spirit up with some red Humbrol enamel (left over from a bicycle restoration I did in 2016) no 19 red gloss. I thoroughly cleaned the area around the shield and logo on both sides with acetone, stirred up the enamel well, painted over the area with the logo and shield on both sides, propping the tool so that neither painted area touched the deck, left to dry for 90mins, wiped the excess paint off with a taut rag over the finger almost dry yet moist with acetone, and rubbed off the excess paint leaving the areas filled in with paint. It’s a method I used in my teens and beyond for picking out logos, lining cut-outs, etc on cycle components. Same process as for those using nail varnish I’m sure, but hopefully the enamel will be more durable in the long run.

-

Nice job and Happy Belated BD! -
Cool 29 degrees F here today so the Swisstool came to the pellet stove rescue!

-
@Sos24 said:
Day 9
Used the Spirit to assist with some paracord work, cutting an apple, opening a box; but I liked the glamour shot taken while walking Fisher outside the Vet better.
Nice Pic Sos!
Nice to hear that Fisher is well!
Fisher is a good and nice dog.Enviado de meu moto g(6) usando o Tapatalk
-
Day 10 -
Pliers assisted to open latch on bucket lid.
-
Day 10
“yin-yang”
-

Day 10 Nothing today other than opening seed packets

-
a little early for us to be planting outside. -
Used Swisstool to open the battery compartment for the reading pen, I was wondering whether Swisstool has the appropriate small screwdriver for the job, and surprised to find out how well the small flathead has worked, just like how can opener fine head would work as impromptu phillips in 91mm.

Nice to know. I have one of those type of screws on a small battery fan and not many drivers work with it.
@kottskrapa said:
Day 10 - I tried to use the saw but I had to use the bigger gasoline brother or I will saw until end of days
[It's not failure if you learn something from it]
The Saw is great but sometimes bigger and powered blade comes in handy
@Barry Rowland said:
Cool 29 degrees F here today so the Swisstool came to the pellet stove rescue!How well does the pellet stove work? Do you go through a loy of pellets?
@LoopCutter said:
Day 10 -
Pliers assisted to open latch on bucket lid.Those lids can be a pain to open but the buckets do come in handy.
@jnoxyd said:
Day 10
“yin-yang”
Very nice. It looks like the black has seen more action. Does the other get jealous?
Day 10 Nothing today other than opening seed packets

Great use. Are you starting inside seedlings or actually planting outside?
-
@Rizio Il Ghiro said:
Mags, Fuzz and Douglas - well spotted, and thank you! 55 yesterday, another year older, but none the wiser!Day 10
Early delivery this morning, and Spirit XBS’s blade came in handy to cut the sellotape seals on my latest acquisition- another Spirit, but this time the plus with ratchet!
Happy late birthday, Rizio and nice acquisition. The enamel paint came out real nice too.
-
@Hevy (CT-782) said:
Nice Pic Sos!
Nice to hear that Fisher is well!
Fisher is a good and nice dog.Enviado de meu moto g(6) usando o Tapatalk
Thanks Hevy. Fisher just needed a couple shots but all is well. He actually made the Vet Techs day, because he was actually acting happy and he was so sweet and lovable towards her.
-
@Sos24 said:
Great use. Are you starting inside seedlings or actually planting outside?@Fuzzbucket said:
Starting things of in a greenhouse I should think.Correct, the Tomats are sown and placed on the heated bed, they will stay in the greenhouse, i will start to sow the beets direct into the soil in a few weeks, still a bit cold and wet for those, or anything else really, i have lemon grass seeds too that i want to try to germinate and those can go out in the summer, as a backup i have a few stalks rooting atm as they will be fine for sure, as long as i remember to bring them back in late summer i can have tomato and beetroot lemongrass pie which doesn't sound very appetising and it probably isn't but at least i will have the ingredients for it :D
-
**Swiss Fuzz Day 10 **
Used the Swisstool to cut back some fencing getting in the way of Barbara Dickson Dyke.

The minute after I took that shot, that part of the wall suddenly collapsed as well... right on bloody top of me. After ten minutes taking the pain trying not to cry, I realised miraculously nothing was broken or smashed... smurfing hell that was lucky, there was some big rocks in amongst that lot - the coping stones bounced off my shin landed right on my foot.



-
Day 10 :
Trying to fix mum's HP printer that doesn't print black anymore, even with new cartridge. SPOIL : it didn't work.Used the large flat screwdriver as a pry bar to pop the latch of the printer lid, then the torx bit and ratchet to disassemble the beast so I could access the printing heads. Even used the pliers to remove and then reset the large springs that push the printing heads down on the paper!

-
@Fuzzbucket said:
**Swiss Fuzz Day 10 **Used the Swisstool to cut back some fencing getting in the way of Barbara Dickson Dyke.

The minute after I took that shot, that part of the wall suddenly collapsed as well... right on bloody top of me. After ten minutes taking the pain trying not to cry, I realised miraculously nothing was broken or smashed... smurfing hell that was lucky, there was some big rocks in amongst that lot - the coping stones bounced off my shin landed right on my foot.



Lucky you weren't wearing your Crocs :o good luck putting that jigsaw back together

@m47mu74nt said:
Day 10 :
Trying to fix mum's HP printer that doesn't print black anymore, even with new cartridge. SPOIL : it didn't work.Used the large flat screwdriver as a pry bar to pop the latch of the printer lid, then the torx bit and ratchet to disassemble the beast so I could access the printing heads. Even used the pliers to remove and then reset the large springs that push the printing heads down on the paper!
Good use

-
Day 10 of 30
Opening mail today with RS.

Only Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


