Getting a multitool: Leatherman or Gerber?
-
It's a tricky one to answer really.
I do carry a Leatherman Charge, but I do so in the knowledge that I could be arrested for it. I don't actually think I would be arrested for it, but I need to be prepared for that eventuality, as the law is clear.
I wouldn't dream of waving it around in public, and when going to the pub or football matches, I leave it in the glove compartment of the car - i.e. I try to be sensible.
But it's illegal, unless I can persuade any interested policeman that I have a valid reason if they ask me.
-
Hi All,
"Leatherman rust & Vic's don't" - I've got 194 Leatherman multis, 57 Leatherman knives, 6 Leatherman pruners and NO RUST. Why, I wipe them down either when I put them away or periodically for the Blast that I normally carry. I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.
Regardless of the make of tool, the owener needs to take care of it. Remember stainless steel means STAIN less! Please think about ending this meaningless diatribe.
Thanks - Joe
-
I packed Leathermans for over 20 years , nary a spec of rust . All I ever tried to do was keep em reasonably clean and dry .
Hope you enjoy your Wave . The Old Skool wave was my longest running multi relationship , nary a hiccup from the ones I carried , or the three I gifted to others .
Chris
-
@joebw said:
I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.Lol. Sorry to selectively quote you Joe - but that made me chuckle. :D
I've never had a problem with any of my Leatherman tools either, and I really don't look after them or maintain them at all really. If they get wet, I tend to just wipe them on my trouser leg or something and they seem fine.
I've seen some horrible rust on tools that I've bought on ebay etc - but that goes for Leatherman, Gerber Vic et al - I've really seen no evidence that Leatherman tools are any more susceptible to rust than any others. Then again I've only got about 120 :D
-
Hello again!
I've had a busy few months and just remembered I said I'd come back and post pictures! Unfortunatley, as is always the case, I was too busy to take a picture, though I can say having my Wave on me was a great help, and it goes to every show and there's always a use for it!
I'd also like to mention that the customer service of Leatherman is great, for anyone looking to buy a multitool and considering a Leatherman. I (very stupidly) accidently dropped my Wave while using the small screwdriver bit, Needly to say it snapped as is to be expected. I dropped Leatherman an email, asking where I could purchase a new one (as I didn't think my stupidity would be covered in the warrenty!) but they just asked for my address and sent a new bit out, and I recieved it a couple of days later! :D
One thing to mention is about loosening it up. I'm trying to break into it still, so to speak, but it's still no where near as loose as I'd like. Does anyone have any suggestions? I've looked and it has been covered before, I see, but as I'm replying anyway I thought I may as well tag the question on the end!
Many thanks,
Hobit -
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
-
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :D -
Glad to hear about the great service
My radius broke but the deisel and 600 series have held up great
-
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:) -
Dennis,
You are a passionate man :DBy the way my 400 that I got from you, is one of my favorite multis so I don't dislike Gerbers.
I have an eye out for a 600. -
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:)Quite right too Dennis. It always amuses me when you get comments like "Gerber pliers are weak", then you look at the Freehand, or that the "quality is poor", and you look at the beating my old multiplier has taken and remains perfectly solid.....
I still maintain that the Gerber Multiplier / MP600 is one of the best multitools ever made!
-
.................................
-
[quote author=Styerman link=topic=15326.msg380049#msg380049 date=1275096317]
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:)Quite right too Dennis. It always amuses me when you get comments like "Gerber pliers are weak", then you look at the Freehand, or that the "quality is poor", and you look at the beating my old multiplier has taken and remains perfectly solid.....
I still maintain that the Gerber Multiplier / MP600 is one of the best multitools ever made!
[/quote]I own a Gerber Freehand and its been in my truck for over 2 years now, but i cannot agree with you Dave on the plier strength. For a multi of that size it simply does not measure up especially compared to the swisstools, surge/core or powerlocks. i have had to use it for twisting and it gets bent out of shape easily, and the cutters dont make a complete cut due to the gap in the cutters.
I have however had a pretty decent experience with a blunt nose mp600 that i owned, I gave it to my bro and he is beating the hell out of it now. I wouldnt say its one of the best multis ever made though. :)Disclaimer
All of the above comments should be considered only as an opinion of the author and not an attempt to engage in hostile exchanges with those to whom the author disagrees. :D -
@nelly1974 said:
Disclaimer
All of the above comments should be considered only as an opinion of the author and not an attempt to engage in hostile exchanges with those to whom the author disagrees.Lol.
I suppose it depends what you do with them, but I've always rated the Freehand as a tough tool, maybe I haven't tried hard enough ;)
I agree wholeheartedly about the Blunt nose Gerbers, particularly the Multiplier and MP600 and I rate the pliers on those as tough ( I have used those hard). :)
-
Hi guys, I'm back again!
The Wave has served me great over the last 11 months and am rarely seen without it on my side!
However, back again to the legalities of carrying a locking blade. Sure, when I have a need for it, that's great! However, I do literally have my Wave on my side all the time, even when I don't need it (or don't think I will, should I say!). I'm looking to purchase a second multitool purely for going out and about in, so to speak, that is knifeless. The one that springs to mind is the Leatherman Knifeless Fuse, especially as I'm very happy with Leatherman. However, the most common tool I use is the pliers, which need to be unfolded before use. On my Wave I have worked into it a lot so i can flick open the tool one handed to access the pliers, but with this I find that if I grip very tightly on something when I open the pliers the 'legs' will move but the pliers will stay gripped to the object (does that make sense??). So the requirements for this tool are for it to be knifeless and hand one handed access to the pliers. The reason the Knifeless Fuse doesn't do it for me is access to the pliers which I can access one handed like my Wave if I work into it, but then I loose the stability of the pliers.
What I'd like is as mentioned earlier in the thread the Gerber Compact Sport 400 or something similar (with the very easy one handed access to the pliers). Unfortunatly there is a knife. As far as I'm aware, Gerber don't make a knifeless multi tool with the flick opening. If they do I'd more than likely go for this tool. However, if I were to purchase this Gerber or some equivilent, what is the possibility of me removing the knife on it?
Thoughts and opinions please, and suggestions as to a multitool that meets the requirements! As I wish to EDC this multitool, I don't want it to be huge either, no bigger than a Wave which I'm fine to EDC now! :)
Thanks very much in advanced,
HobitEDIT: As I want to EDC I still want as many other features as you can throw at it!! :D
-
A good option might be something from SOG. Easy to flip open and the blade can be swapped out for another tool.
-
Without knowing much about your application , I would have a good look at the Wave . Good solid middleweight contender !
Chris
-
Several people might bash me for saying this, but you could always break the knife blade off if you are sure you will never use it...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login