Getting a multitool: Leatherman or Gerber?
-
Hi guys! A Merry Christmas to you all! Which means......
I recieved my Leatherman Wave yesterday! :D
Thanks to everyone! First use yesterday for it was to open a present where some cheeky person had taped over all the edges so you couldn't get your fingers under to open it! So not long after having the LM it had already had a use!
I'll report back some time next month again, as I've got a couple of shows on next month, mainly panto of course! "Oh no he hasn't" I hear you all cry! ;)
There is just two more things to ask :)
Firstly, what does EDC stand for!! I keep seeing it all over the forum! Is it EveryDay Carry? That's the best answer I could find from Google, and does seem to fit what everyone says, but I thought I'd make sure ;)
Secondly, I am nearly 18, yet, of course, that still makes me under 18! Obviously I'm not allowed to buy knives etc, but what's the law on under 18s carrying them? Obviously, the wave is a no no anyway, due to the locking blade (as long as they don't catch you ;) ), but what about smaller, non locking blades for under 18s?
Many thanks,
Hobit :) -
I'd vote wave . Build quality on Gerbers is suspect . The flik pliers are a good gimmick , not much use . I used to enjoy them for scaring the Doo Doo out of police and security , sounds lots like a semi getting it's slide racked .
Chris
-
EDC is every day carry.

-
Congrats Hobit - that's a great Christmas present you've got there, and I look forward to hearing how you get on with it as time goes by.
The question about the UK knife law....
I got this from Police-Information.co.uk as it seems pretty well laid out:
Public Place
Source: Criminal Justice Act, 1988. Section 139(1).
Offence: It is an offence for any person, without lawful authority or good reason, to have with him in a public place, any article which has a blade or is sharply pointed except for a folding pocket-knife which has a cutting edge to its blade not exceeding 3 inches.
Powers: Arrestable offence.
and the relevant bit:
Sell to under 16
Source: Criminal Justice Act, 1988. Section 141A
Offence: It is an offence for any person to sell to a person under the age of 16 any knife, knife blade, razor blade, axe or any other article which has a blade or is sharply pointed and which is made or adapted for causing injury to the person.
Powers: Proceedings should be by way of a summons only, unless any of the conditions of s.25 of PACE 1984 are satisfied.
There doesn't seem to be a minimum age to carry a blade provided you comply with the first bit I quoted.
From that, I deduce that if you can buy a knife at 16, and it's "legal" - you are fine

-
Thanks very much! So, curiously, how many of you do carry MTs with locking blades if it is prohibited in your country? I'd want my Wave on me "just in case", and it would be out of sight, etc, and I'm not one to cause suspicion (though have been accused of shoplifting from ASDA because I gave the security guard "a funny look", showed him the receipt and it was fine though :)). I know people who do have their MTs on them at all times. In fact, I was with such a person one time when we were with the police as he had been burgeled, and his Gerber was on his belt, and the police officer said nothing about it. Thoughts anyone? :)
-
to be honest, I think a locking blade on a multi-plier type device isn't even going to get picked up, even if you do get searched, most people won't give a leatherman a second glance. Remember also the whole locking blade rule is just a accident of case law, not a hard and fast law written in an act of parliament.
-
It's a tricky one to answer really.
I do carry a Leatherman Charge, but I do so in the knowledge that I could be arrested for it. I don't actually think I would be arrested for it, but I need to be prepared for that eventuality, as the law is clear.
I wouldn't dream of waving it around in public, and when going to the pub or football matches, I leave it in the glove compartment of the car - i.e. I try to be sensible.
But it's illegal, unless I can persuade any interested policeman that I have a valid reason if they ask me.
-
Hi All,
"Leatherman rust & Vic's don't" - I've got 194 Leatherman multis, 57 Leatherman knives, 6 Leatherman pruners and NO RUST. Why, I wipe them down either when I put them away or periodically for the Blast that I normally carry. I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.
Regardless of the make of tool, the owener needs to take care of it. Remember stainless steel means STAIN less! Please think about ending this meaningless diatribe.
Thanks - Joe
-
I packed Leathermans for over 20 years , nary a spec of rust . All I ever tried to do was keep em reasonably clean and dry .
Hope you enjoy your Wave . The Old Skool wave was my longest running multi relationship , nary a hiccup from the ones I carried , or the three I gifted to others .
Chris
-
@joebw said:
I have 6 or 7 Vic multis which don't rust because they stay in the drawer all the time as they are such a pain to open.Lol. Sorry to selectively quote you Joe - but that made me chuckle. :D
I've never had a problem with any of my Leatherman tools either, and I really don't look after them or maintain them at all really. If they get wet, I tend to just wipe them on my trouser leg or something and they seem fine.
I've seen some horrible rust on tools that I've bought on ebay etc - but that goes for Leatherman, Gerber Vic et al - I've really seen no evidence that Leatherman tools are any more susceptible to rust than any others. Then again I've only got about 120 :D
-
Hello again!
I've had a busy few months and just remembered I said I'd come back and post pictures! Unfortunatley, as is always the case, I was too busy to take a picture, though I can say having my Wave on me was a great help, and it goes to every show and there's always a use for it!
I'd also like to mention that the customer service of Leatherman is great, for anyone looking to buy a multitool and considering a Leatherman. I (very stupidly) accidently dropped my Wave while using the small screwdriver bit, Needly to say it snapped as is to be expected. I dropped Leatherman an email, asking where I could purchase a new one (as I didn't think my stupidity would be covered in the warrenty!) but they just asked for my address and sent a new bit out, and I recieved it a couple of days later! :D
One thing to mention is about loosening it up. I'm trying to break into it still, so to speak, but it's still no where near as loose as I'd like. Does anyone have any suggestions? I've looked and it has been covered before, I see, but as I'm replying anyway I thought I may as well tag the question on the end!
Many thanks,
Hobit -
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
-
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :D -
Glad to hear about the great service
My radius broke but the deisel and 600 series have held up great
-
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:) -
Dennis,
You are a passionate man :DBy the way my 400 that I got from you, is one of my favorite multis so I don't dislike Gerbers.
I have an eye out for a 600. -
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .
Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:)Quite right too Dennis. It always amuses me when you get comments like "Gerber pliers are weak", then you look at the Freehand, or that the "quality is poor", and you look at the beating my old multiplier has taken and remains perfectly solid.....
I still maintain that the Gerber Multiplier / MP600 is one of the best multitools ever made!
-
.................................
-
[quote author=Styerman link=topic=15326.msg380049#msg380049 date=1275096317]
Leatherman , forget about Gerber - deffinatley a "B" or "C" string tool .Chris
Would it be too much to ask for you to add that it's just your opinion? Especially when posting nonsense like the above.
Hey Dennis,
What's with the ULTRA sensitivity to gerber criticism ???
The other day i made a comment about gerber pliers being at the bottom of the barrel, regarding strength, and you called my comment BS, now you have your panties in a twist
over Styerman's comment. Chill out dude, we are all just giving our 2 cents.
I read comments on this forum that I tottally think are false on a regular basis and i just take it with a grain of salt.
Now if you own Gerber stock, that's a different story :DFirst of all. I don't wear panties
:) . I admit ,on occasion I might get a little sensitive. But there is a lot of Gerber bashing that goes on on this site. Most of the time I ignore it . Occasionally something is said I feel the need to respond to. Mostly when I see something said that is IMO untrue. I shall attempt to better control myself
:)Quite right too Dennis. It always amuses me when you get comments like "Gerber pliers are weak", then you look at the Freehand, or that the "quality is poor", and you look at the beating my old multiplier has taken and remains perfectly solid.....
I still maintain that the Gerber Multiplier / MP600 is one of the best multitools ever made!
[/quote]I own a Gerber Freehand and its been in my truck for over 2 years now, but i cannot agree with you Dave on the plier strength. For a multi of that size it simply does not measure up especially compared to the swisstools, surge/core or powerlocks. i have had to use it for twisting and it gets bent out of shape easily, and the cutters dont make a complete cut due to the gap in the cutters.
I have however had a pretty decent experience with a blunt nose mp600 that i owned, I gave it to my bro and he is beating the hell out of it now. I wouldnt say its one of the best multis ever made though. :)Disclaimer
All of the above comments should be considered only as an opinion of the author and not an attempt to engage in hostile exchanges with those to whom the author disagrees. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login