MT.O Challenge Coin
-
The company i've been looking at has minimum orders of 50 with a one time die cost of $120, but order 300+ and they absorb the cost of the die.
I won't say how much each coin costs because it changes with quantity, and i'm sure with complexity, but it's certainly not what i would call too much.I've just emailed them and i'll relay what their response is when it comes.
~If your interested it's these guys: http://www.coinsyourway.com/
PS: Syph007 do you have a link to some of these gaming tokens? They sound like they would be worth a look at.
-
@Tofty said:
PS: Syph007 do you have a link to some of these gaming tokens? They sound like they would be worth a look at.Here are some pics of ones I have. I bought in for 2 years so I have 2 different versions. Both are done in brass.




They're still sold here I think. http://arcadetokens.com/
-
Tofty,
What is the outside diameter you are thinking of? Looks like about 30 - 35mm on your renderings..?I'm thinking it would be best if all MTO challenge coins (present and future) were about the same size. Makes a collection seem more like a set. So anyhow, even though this first design may be on the simple-ish side and therefore can be made small, we should leave ourselves enough space to fit future - perhaps more complex - designs into the same size coin down the road.
So I'd like to propose we go no smaller than 35mm (1-3/8") :)
-
@50ft-trad said:
[quote author=enki_ck link=topic=43150.msg693200#msg693200 date=1361105234]
[quote author=AHB link=topic=43150.msg693174#msg693174 date=1361102735]
I think it should be kept as simple as possible, so a hex in the middle and rounded edges (like the ones on top/no spoke wrenches) all the way around. Nothing more.. :)This, but make the edge like the pocket screwdriver so it can be used on different sizes of screws.

Maybe lower the 1/4 hole, place a double sided leatherman flat/phillips bit in the middle and the full name on top.

I really like this idea enki_ck
I do not ride bikes so a spoke wrench does not attract me.
If it is a wrench I like Nuphoria's idea with metric or standard slots.+1, I like the coin driver too.
+1 From me also for the coin drive, simple and useful. ;)
[/quote]That would also make it easier to carry on a spring clip on a keyring

[/quote]+1 on a coin driver too it looks cool as well as useful

-
@J-sews said:
Tofty,
What is the outside diameter you are thinking of? Looks like about 30 - 35mm on your renderings..?I'm thinking it would be best if all MTO challenge coins (present and future) were about the same size. Makes a collection seem more like a set. So anyhow, even though this first design may be on the simple-ish side and therefore can be made small, we should leave ourselves enough space to fit future - perhaps more complex - designs into the same size coin down the road.
So I'd like to propose we go no smaller than 35mm (1-3/8") :)
+1 In addition to looking nice, this would allow us to leave the outside form untouched and change some of the text between years if we don't want to do a full redesign of the coin each time a new design is minted.
-
@Tofty said:
@snowbound: I re-read your post and realised you plan on using a coin from shapeways as the master.
I'm not sure if any of the materials are good enough to be used as a master form, perhaps the ultra-detail plastic but even then the surface will be relatively rough.If not, I have a friend with a 3D resin printer that I may be able to bribe into printing one out for me.. technically that resin can be burnt out for lost-wax casting, so it's pretty high detail.
If there's a 3D model available (shapeways or offline) send me a link (or PM me and I'll send an email addr) and I'll print one out and give it a try in pewter for the heck of it
-
@Suph007: Love those tokens, makes mine look a bit pants.
Jsaws wrote:
Tofty,
What is the outside diameter you are thinking of? Looks like about 30 - 35mm on your renderings..?I'm thinking it would be best if all MTO challenge coins (present and future) were about the same size. Makes a collection seem more like a set. So anyhow, even though this first design may be on the simple-ish side and therefore can be made small, we should leave ourselves enough space to fit future - perhaps more complex - designs into the same size coin down the road.
So I'd like to propose we go no smaller than 35mm (1-3/8") :)
Agent X68 wrote:
+1 In addition to looking nice, this would allow us to leave the outside form untouched and change some of the text between years if we don't want to do a full redesign of the coin each time a new design is minted.Tofty: The outside diameter of the coin is now 1-3/4" (around 45mm).
I like both of your thinking, it's all about future proofing the idea.
I must admit a row of anything looks better if they're all the same size but it must be said that implementing some of the ideas in this thread would mean deviating from the standard coin size by quite a bit and even the coin shape itself.rayraychil wrote:
+1 on a coin driver too it looks cool as well as useful
Tofty: Well tough titties!
But seriously, that design or elements of it make a strong contender for a future coin design.snowbound wrote:
If not, I have a friend with a 3D resin printer that I may be able to bribe into printing one out for me.. technically that resin can be burnt out for lost-wax casting, so it's pretty high detail.If there's a 3D model available (shapeways or offline) send me a link (or PM me and I'll send an email addr) and I'll print one out and give it a try in pewter for the heck of it
Tofty: Sure thing, PM me and i'll send you the coin in an STL. file.
@Raukodur: Sorry but your not allowed to kick me after all.
<a href="http://s194.photobucket.com/user/Toftylicious/media/EDC Keychain/MTOChallengeCoin012_zps067a16e2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC Keychain/MTOChallengeCoin012_zps067a16e2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Let me know what you think and i can upload it onto shapeways if you want to get one.
The text could do with improving though.Right onto MT.O coin progress;
I've had the initial quote back from the coin people and despite them redrawing my designs from scratch instead of using the model i deem it be be suitable.
I will therefore be starting a sign-up thread to show interest in the coin so we can judge numbers.
Look out for it sometime early tomorrow probably. -
I'd get one or three :D What's the price estimate

-
Thats pretty cool, is that what your going with? JR
-
@Tofty said:
<a href="http://s194.photobucket.com/user/Toftylicious/media/EDC Keychain/MTOChallengeCoin012_zps067a16e2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC Keychain/MTOChallengeCoin012_zps067a16e2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Let me know what you think and i can upload it onto shapeways if you want to get one.
The text could do with improving though.Many thanks for the 3d mockup Tofty

So this has the same central hex driver function as the coin design we are going with, but can be attached to a keyring, and have other things attached to it. Also, the same design can be put onto it.
IMO this would have been a better choice

-
I like the three sided over the six, without the holes. It would have been nice to be able to hang it but I don't think it adds too much more function. IMO using the room for the design/writing adds some style points.
-
Very late to the party. I didn't know about this effort, so I couldn't express my opinion earlier. I don't know if it is finalized but I have a query: Why so many (6) MT. initials around? Is it impossible to print the Forum icon, the famous "Generic" Multitool with parallel handles?
-
Seems a bit wrong to me. A multitool coin that says multitool on it but has only one function.
And at expected $15 a pop is seriously overpriced for that one function.Not having a go, just the way I see it.
Good luck anyway.
-
@stealth007s said:
I'd get one or three :D What's the price estimate
Price will be below $15, can't say for sure as it's all in Grants hands from now on.
@MadPlumbarian said:
Thats pretty cool, is that what your going with? JR@Raukodur said:
Many thanks for the 3d mockup Tofty
So this has the same central hex driver function as the coin design we are going with, but can be attached to a keyring, and have other things attached to it. Also, the same design can be put onto it.
IMO this would have been a better choice

It's a good contender for a future run but for now it has a few draw-backs:
- I have no idea if the design can be made for the same cost as the simpler coin or indeed at all, we've never made a tool coin before so i feel that keeping things as simple as possible is the best option for now.
2.The same design wouldn't fit as the face area is much smaller, i wanted to maximize the available design space on the coin and the keyring cut-outs would have reduced it considerably. - There wasn't a great amount of interest in having the coin as a keyring attachable item.
@kkokkolis said:
Very late to the party. I didn't know about this effort, so I couldn't express my opinion earlier. I don't know if it is finalized but I have a query: Why so many (6) MT. initials around? Is it impossible to print the Forum icon, the famous "Generic" Multitool with parallel handles?It actually says MT.O with the O being the bit driver, the 6 MT.s complement the central hex aesthetically.
It was never impossible to add the parallel handled multitool logo but it's not my design, it belongs to Travis and i wanted to try something else.
The MT.O pattern was originally a place holder but since some people said they liked it i saw little reason to change it.
Next years coin will be better i'm sure of it (because someone else will be designing it).@chip said:
Seems a bit wrong to me. A multitool coin that says multitool on it but has only one function.
And at expected $15 a pop is seriously overpriced for that one function.Not having a go, just the way I see it.
Good luck anyway.
It's not a multitool coin it's the 2013 Multitool.org (MT.O) challenge coin.
It could have no tools on it at all and still be a legitimate forum item but i felt it could do with a little something extra.
As far as i know it's only coin made to be any kind of tool, other than a bottle opener and a coin this size can open a bottle easily anyway if you've got the knack so i suppose that is two functions not including it just being a cool collectors piece.
The EDCforums coin costs $20 as do the USN ones so i think it's a pretty good deal if you like coins, which i do. - I have no idea if the design can be made for the same cost as the simpler coin or indeed at all, we've never made a tool coin before so i feel that keeping things as simple as possible is the best option for now.
-
Fair enough,
Judging by your sign up thread you will have no problem shifting them.Hope it all goes to plan.
Atb,
Chip -
Tofty, I think the vast majority of us believe you have done an excellent job with this. And well done on being the designer of the very first MTO challenge coin!
And the single function being a hex driver, is a very minimalist and clever idea, only 1 function, but since it can fit any hex bit, also potentially infinite functions. Which kind of sums up what a multitool is, one tool, but many functions.
-
What's it for? :ahhh
-
I'm glad you asked Bob, because you need to get one or you are going to owe me a lot of drinks when I see you next! :D
In WWI pilots had Challenge Coins struck with their unit info on it. They were required to have them on them at all times, and they would often challenge eachother to present it. If you are challenged and cannot produce it you owe the challenger a drink. If you do produce it, the challenger owes you a drink.
Def
-
I'd like:
-a second hole near the outside, I can pass a keyring and easily removable for using as a coin for the supermarket "caddie"
-Hex on the edge like a wrench
-half edge: to small to large flat screwdriving ability, ideal for keyring opening instead of nail
-
@Grant Lamontagne said:
I'm glad you asked Bob, because you need to get one or you are going to owe me a lot of drinks when I see you next! :DIn WWI pilots had Challenge Coins struck with their unit info on it. They were required to have them on them at all times, and they would often challenge eachother to present it. If you are challenged and cannot produce it you owe the challenger a drink. If you do produce it, the challenger owes you a drink.
Def
things will be interesting at the next meet up
someone better bring the coin or $$$ >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








