SAK blade closing
-
let it snap. Been doing it for years and no problems.
-
I personally let the Blade or Tools snap back into place unless I suspect there is something wrong. As StressMaster said if you have a bail on there watch out. I have closed the main blade on the bail as well and its not pretty.
-
@captain spaulding said:
I personally let the Blade or Tools snap back into place unless I suspect there is something wrong. As StressMaster said if you have a bail on there watch out. I have closed the main blade on the bail as well and its not pretty.that reminds me, Make sure the keyring is out of the way when closing the awl on 91mm saks.
-
I let it snap like it wants to. :D Its why the liners are softer material than the blade. If it goes too far it will hit the softer Al or nickel silver and nick it, but should not harm the knife much. That being said Ive had models form the factory that when closed, will touch the liner, and thats not right.
-
You bunch of snappers. :ahhh
:D
-
Let it snap
The noise you hear is the kick (at the tang) hitting the spring, and the blade edge is not going to be damaged unless something else is in the way as already mentioned. In theory it could shorten the life of the spring, but in reality I don't think there's anything to worry about at all .... so long as your fingers are out of the way :ahhh :ahhh -
Usually snap, but I did have a Cybertool where the blade would slam into the backspring pivot, so that got closed slowly.
-
I avoided snapping for decades, until reading posts here and the SAK Owners manual. Now I snap with all my heart and enjoy the sound and feeling.
-

I'm not sure actually why I don't let them snap. I do it one handed and all but this just feels right.

~~Hopefully the video will be viewable. ~~ Youtube then. ::)
-
Oh no, Im not trying that one handed trick again! I cut myself good last time! :D
-
-
I, like many members here no doubt, often sit watching TV with an Alox SAK in hand opening and closing the blade listening to that SNAP... chewing gum for the hands...
As others have said, the only problem I've had is letting a brand new Wenger SI (no date code one thankfully) bite its own bail :ahhh
-
I usually let it snap, except one that bottoms out. That one handed trick looks pretty cool.
-
On some models the blade will hit backspring and dent the edge, if yours doesn't I don't see why not.
-
I have a huntsman that the blade has a slight dent on from hitting when closing. I still let it snap though.

-
The video of one-hand-opening matches that described in the SAK Owner's Manual, with an important difference: the guy puts his thumb against the blade-edge twice. This will enevitably result in the need of a bandage if done with a properly-sharp blade. The blade shown is surely very dull -- or the guy bleeds slow -- it is a short video.

-
@Syph007 said:
I let it snap like it wants to. :D Its why the liners are softer material than the blade. If it goes too far it will hit the softer Al or nickel silver and nick it, but should not harm the knife much. That being said Ive had models form the factory that when closed, will touch the liner, and thats not right.Does that go for your models too? JR
-
@J Mackrel Jones said:
The video of one-hand-opening matches that described in the SAK Owner's Manual, with an important difference: the guy puts his thumb against the blade-edge twice. This will enevitably result in the need of a bandage if done with a properly-sharp blade. The blade shown is surely very dull -- or the guy bleeds slow -- it is a short video.
Challenge accepted. :P
That's actually me opening the knife. ;) So you want a video with a shaving sharp SAK?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








