Discussion Zack and I had

Shane769 · **Reply #60 on:** September 21, 2009, 01:44:53 AM

That's all I got. James to Dan seems like a much better route then James to Def to Dan. That is just over half the distance if you plug it into Google Maps. From 4000+ km, to 2500km. Mind you it doesn't matter as the post office is handling that part.

PyroJames · **Reply #61 on:** September 21, 2009, 01:50:25 AM

Shane's right, it would make better sense to do that. It might even cut down on shipping time which is always good.

Shane769 · **Reply #62 on:** September 21, 2009, 01:52:32 AM

New York to Toronto is shorter than New York to Halifax, but overall this is shorter I think

duckman1975 · **Reply #63 on:** September 21, 2009, 01:56:23 AM

Just want to confirm the pass around will be a knifeless fuse....... going knifeless is easier to ship

MultiMat · **Reply #64 on:** September 21, 2009, 02:02:10 AM

Might be easier if I am 19. between Tinnie & ryan1976 as I am between the 2 of them in a rather large country

.
Great work guys

18. Tinnie - Queensland, Australia
19. multimat , Adelaide , South Australia
20. ryan1976 Perth, Western Australia

RaptorMan · **Reply #65 on:** September 21, 2009, 02:04:30 AM

OK I am really lost now $:-\$ ....

MultiMat · **Reply #66 on:** September 21, 2009, 02:08:25 AM

Me

Tinnie is on the East Coast , ryan1976 is on the West Coast & I am in the middle.

RaptorMan · **Reply #67 on:** September 21, 2009, 02:11:15 AM

OK fixed that but what about our Canada bretheren? I was lost on that switch....

1. Zack, GA
2. Spoonrobot – Alabama
3. Pacu, Houston Tx
4. Blackout Oklahoma
5. Ari6126 New Mexico
6. Scrappy Utah
7. Ducttapehero South West Missouri.
8. Greatest Moderator Ever! Michigan
9. J Sews Michigan
10. Raptor Man Ohio
11. WH867 Ohio
12. Mr. Whippy Maryland,USA
13 .Steve Racer New York
14. PyroJames - Toronto, Ontario (Canada
15. Grant- Halifax, Nova Scotia, Canada
16. Chako Sault Ste Marie, Ontario Canada
17. Shane769 Prince George, British Columbia, Canada
18. Tinnie - Queensland, Australia
19. multimat , Adelaide , South Australia
20. ryan1976 Perth, Western Australia
21. Duckman1975 Province of Pangasinan, Luzon Island, Philippines
22.Medic82 Norway

PyroJames · **Reply #68 on:** September 21, 2009, 02:16:57 AM

I think Def should switch spots with me. This way, we can move from east to west in one smooth direction.

RaptorMan · **Reply #69 on:** September 21, 2009, 02:19:05 AM

Like this?

1. Zack, GA
2. Spoonrobot – Alabama
3. Pacu, Houston Tx
4. Blackout Oklahoma
5. Ari6126 New Mexico
6. Scrappy Utah
7. Ducttapehero South West Missouri.
8. Greatest Moderator Ever! Michigan
9. J Sews Michigan
10. Raptor Man Ohio
11. WH867 Ohio
12. Mr. Whippy Maryland,USA
13 .Steve Racer New York
14. Grant- Halifax, Nova Scotia, Canada
15. PyroJames - Toronto, Ontario (Canada
16. Chako Sault Ste Marie, Ontario Canada
17. Shane769 Prince George, British Columbia, Canada
18. Tinnie - Queensland, Australia
19. multimat , Adelaide , South Australia
20. ryan1976 Perth, Western Australia
21. Duckman1975 Province of Pangasinan, Luzon Island, Philippines
22.Medic82 Norway

MultiMat · **Reply #70 on:** September 21, 2009, 02:19:59 AM

Hay no one from the UK

ari6126 · **Reply #71 on:** September 21, 2009, 02:23:44 AM

Quote from: MultiMat on September 21, 2009, 02:19:59 AM

Hay no one from the UK

I'm not sure, but it might be because the blade locks.

Chako · **Reply #72 on:** September 21, 2009, 02:38:53 AM

would be great to use something that is legal everywhere.

duckman1975 · **Reply #73 on:** September 21, 2009, 02:43:28 AM

Quote from: Chako on September 21, 2009, 02:38:53 AM

would be great to use something that is legal everywhere.

Knifeless fuse

Shane769 · **Reply #74 on:** September 21, 2009, 03:05:53 AM

Quote from: RaptorMan on September 21, 2009, 02:19:05 AM

Like this?

1. Zack, GA
2. Spoonrobot – Alabama
3. Pacu, Houston Tx
4. Blackout Oklahoma
5. Ari6126 New Mexico
6. Scrappy Utah
7. Ducttapehero South West Missouri.
8. Greatest Moderator Ever! Michigan
9. J Sews Michigan
10. Raptor Man Ohio
11. WH867 Ohio
12. Mr. Whippy Maryland,USA
13 .Steve Racer New York
14. Grant- Halifax, Nova Scotia, Canada
15. PyroJames - Toronto, Ontario (Canada
16. Chako Sault Ste Marie, Ontario Canada
17. Shane769 Prince George, British Columbia, Canada
18. Tinnie - Queensland, Australia
19. multimat , Adelaide , South Australia
20. ryan1976 Perth, Western Australia
21. Duckman1975 Province of Pangasinan, Luzon Island, Philippines
22.Medic82 Norway

Looks good to me. Don't know the states part well, but the rest works.

If it is a Knifeless Fuse, we should get some of them pesky Brits in on this too. Make the scrapbook that much more interesting.

Zack · **Reply #75 on:** September 21, 2009, 02:50:48 PM

I don't have a knifeless fuse as they are near impossible to get where I am, unless I order one, and the funds simply do no allow it at this point. I was planning om sending a regular fuse, and the only other tool I have that doesn't lock is a kick, and that no really all that interesting. So, I guess if someone else wants to part with a knifeless fuse for the passaround (keep in mind I was also planning on doing a giveaway at the end) then I am all ears, or possibly other suggestions.

Zack · **Reply #76 on:** September 21, 2009, 02:56:05 PM

Quote from: Shane769 on September 21, 2009, 03:05:53 AM

Quote from: RaptorMan on September 21, 2009, 02:19:05 AM
Like this?

1. Zack, GA
2. Spoonrobot – Alabama
3. Pacu, Houston Tx
4. Blackout Oklahoma
5. Ari6126 New Mexico
6. Scrappy Utah
7. Ducttapehero South West Missouri.
8. Greatest Moderator Ever! Michigan
9. J Sews Michigan
10. Raptor Man Ohio
11. WH867 Ohio
12. Mr. Whippy Maryland,USA
13 .Steve Racer New York
14. Grant- Halifax, Nova Scotia, Canada
15. PyroJames - Toronto, Ontario (Canada
16. Chako Sault Ste Marie, Ontario Canada
17. Shane769 Prince George, British Columbia, Canada
18. Tinnie - Queensland, Australia
19. multimat , Adelaide , South Australia
20. ryan1976 Perth, Western Australia
21. Duckman1975 Province of Pangasinan, Luzon Island, Philippines
22.Medic82 Norway

Looks good to me. Don't know the states part well, but the rest works.

If it is a Knifeless Fuse, we should get some of them pesky Brits in on this too. Make the scrapbook that much more interesting.

Also what about the idea on an online scrapbook. We could sticky a thread in there, and everyone post some pics to it along with what they did with the tool. Makes it a lot easier to keep up with, and if the tool does get lost then we still have the writeups on here for posterity, and makes the tool easier to ship. Just a thought just adding what we did on a camera forum I belong to, but then again we were also passing around a cheaper digital camera, in case people were still using film.

Zack · **Reply #77 on:** September 21, 2009, 03:01:39 PM

Here is the thread on photographyreview.com that I was talking about. I don't think you have to register to see it.

http://forums.photographyreview.com/showthread.php?t=30861

Also just noticed I am now in the No Life Club, cool.

MultiMat · **Reply #78 on:** September 21, 2009, 03:20:16 PM

Is it really such a risk sending a Fuse too the UK , surely it would only be a problem if the tool holder went out of their way too be a dickhead in front of a policeman

. Didn't Dunc buy a LM Wave from a shop , so blade locking MT's can be bought in the UK.

If the Fuse gets confiscated in the UK I am happy to sub my Fuse into the field of play.

BTW Zack congrats on trading your life in buddy

Freudian Frog · **Reply #79 on:** September 21, 2009, 04:34:28 PM

Quote from: Zack on September 21, 2009, 03:01:39 PM

Here is the thread on photographyreview.com that I was talking about. I don't think you have to register to see it.

http://forums.photographyreview.com/showthread.php?t=30861

Also just noticed I am now in the No Life Club, cool.

Grats.

Shane769 · **Reply #80 on:** September 21, 2009, 05:34:37 PM

I like that online scrapbook idea a lot. As for the Fuse, didn't know. Makes its world travel a little short, but I can't complain.

And congrats on having no life

ducktapehero · **Reply #81 on:** September 21, 2009, 07:28:01 PM

1 thing, if all the active participants, or a least most of them, ponied up a few bucks we could buy a knifeless Fuse. I'd be more than happy to contribute. I'd really like to ship a tool that wouldn't get anyone in trouble. Just a suggestion.

Edited to add, here's a black knifeless Fuse on evilbay for $47.95 shipped.

http://cgi.ebay.com/NEW-LEATHERMAN-KNIFELESS-FUSE-MULTI-TOOL-PLIER-830266_W0QQitemZ360185093936QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dcb45f30&_trksid=p3286.m20.l1116

WH867 · **Reply #82 on:** September 21, 2009, 08:06:54 PM

If it would help I have an extra Blast that I would donate. I can take the Blade out and add an extra screwdriver that could always be made into a chisel/scraper,etc.

Zack · **Reply #83 on:** September 21, 2009, 08:11:03 PM

That would be cool a knifeless blast.

jzmtl · **Reply #84 on:** September 21, 2009, 08:17:07 PM

If I recall the wood saw could cause problem in uk as well.

Zack · **Reply #85 on:** September 21, 2009, 08:21:06 PM

Ok, UK members get a pointy stick to passaround...just kidding guys, we'll figure it out.

ari6126 · **Reply #86 on:** September 22, 2009, 03:28:33 AM

I thought there was not such thing as a BO Knifeless Fuse.

Quote from: ducktapehero on September 21, 2009, 07:28:01 PM

1 thing, if all the active participants, or a least most of them, ponied up a few bucks we could buy a knifeless Fuse. I'd be more than happy to contribute. I'd really like to ship a tool that wouldn't get anyone in trouble. Just a suggestion.

Edited to add, here's a black knifeless Fuse on evilbay for $47.95 shipped.

http://cgi.ebay.com/NEW-LEATHERMAN-KNIFELESS-FUSE-MULTI-TOOL-PLIER-830266_W0QQitemZ360185093936QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dcb45f30&_trksid=p3286.m20.l1116

joebw · **Reply #87 on:** September 22, 2009, 05:39:37 PM

Hi,

The SKU # 830266 is for a black oxide Fuse with a knife blade, not a knifeless Fuse. I've sent the seller a question regarding whether this is really knifeless (eg, has a file instead). This person is the second dealer advertising this incorrectly. Yes, I got stung with the first one but eventually got it sorted.

Best - Joe

Freudian Frog · **Reply #88 on:** September 22, 2009, 05:43:14 PM

Quote from: Zack on September 21, 2009, 08:21:06 PM

Ok, UK members get a pointy stick to passaround...just kidding guys, we'll figure it out.

WHOA WHOA WHOA... hey now... better keep that stick pointless. Actually, maybe we should just get a dowel rod...

ducktapehero · **Reply #89 on:** September 22, 2009, 11:20:24 PM

Quote from: joebw on September 22, 2009, 05:39:37 PM

Hi,

The SKU # 830266 is for a black oxide Fuse with a knife blade, not a knifeless Fuse. I've sent the seller a question regarding whether this is really knifeless (eg, has a file instead).

Good catch

Hello Lurker! Remove this ad and much more by logging in.

Discussion Zack and I had

Donations

Community Links