Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


And so it begins.... (My adventures into Alox!)

Syph007 · 6035 · 1299004
« previous next »
Pages: 1 ... 97 98 99 100 101 ... 202   Go Down

ca Offline JP

  • No Life Club
  • ******
    • Posts: 1,118
Re: And so it begins.... (My adventures into Alox!)
Reply #2940 on: August 14, 2015, 03:07:35 PM
Robertson #2

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: And so it begins.... (My adventures into Alox!)
Reply #2941 on: August 14, 2015, 03:13:06 PM
Quote from: JP on August 14, 2015, 03:07:35 PM
Robertson #2

That would be sweet.

Maybe have a #2 with a #1 across from it... :drool:

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,853
Re: And so it begins.... (My adventures into Alox!)
Reply #2942 on: August 14, 2015, 03:34:38 PM
Quote from: Toolslinger on August 14, 2015, 03:13:06 PM
Quote from: JP on August 14, 2015, 03:07:35 PM
Robertson #2

That would be sweet.

Maybe have a #2 with a #1 across from it... :drool:

Robertson?

Is that Canadian language for Phillips? :pok:
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

nl Offline Reinier

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,489
  • \o/
Re: And so it begins.... (My adventures into Alox!)
Reply #2943 on: August 14, 2015, 04:00:01 PM
You should seriously visit vicfan.com. All the hoopy froods are doing it.
Merit Badges Must update or add a page on SAKWiki Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use Start a new thread with photos of camping, including those showing preferred camping equipment Must sell something on EDCSource Must buy something on EDCSource Start a new thread with pictures of a Fish Scaler in use Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your astronomy gear with a multitool Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your camo SAK Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: And so it begins.... (My adventures into Alox!)
Reply #2944 on: August 14, 2015, 04:02:12 PM
Quote from: HarleyXJGuy on August 14, 2015, 03:34:38 PM
Quote from: Toolslinger on August 14, 2015, 03:13:06 PM
Quote from: JP on August 14, 2015, 03:07:35 PM
Robertson #2

That would be sweet.

Maybe have a #2 with a #1 across from it... :drool:

Robertson?

Is that Canadian language for Phillips? :pok:

Nope. Canadian for Square Drive :pok:

Named after the inventor who was Canadian. They are quite prevalent around these parts and one of the reasons I prefer to carry an LM with a bit driver. No company offers one standard on their tools. You can get the add-on from SOG if you can find it and care to pay for the part and shipping.

Reinier beat me to it :tu:

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2945 on: August 14, 2015, 04:11:57 PM
Robertson screws are the highest torque screws you can get.  Love them and its all I buy for wood working / house projects.  The only thing they are not good for is when you WANT a screw to torque out like when doing drywall phillips is better as they will slip out easy.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,853
Re: And so it begins.... (My adventures into Alox!)
Reply #2946 on: August 14, 2015, 06:14:59 PM
So is that the new layer you made?
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: And so it begins.... (My adventures into Alox!)
Reply #2947 on: August 14, 2015, 07:22:53 PM
If Syph made a Robertson layer, I need to get funds for a custom SAK ASAP. :drool:

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2948 on: August 14, 2015, 10:40:50 PM
Quote from: HarleyXJGuy on August 14, 2015, 06:14:59 PM
So is that the new layer you made?

Nope.  Id love one but i think it would have appeal only to Canadians.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: And so it begins.... (My adventures into Alox!)
Reply #2949 on: August 14, 2015, 10:44:22 PM
Quote from: Syph007 on August 14, 2015, 10:40:50 PM
Quote from: HarleyXJGuy on August 14, 2015, 06:14:59 PM
So is that the new layer you made?

Nope.  Id love one but i think it would have appeal only to Canadians.

:cry:

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2950 on: August 15, 2015, 01:08:57 AM
Quote from: Reinier on August 14, 2015, 11:39:11 AM
Some sort of (thin) marlin spike? Ruler?
Sounds interesting.

:D

Hopefully I'll have something to show off in a week.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2951 on: August 15, 2015, 01:10:02 AM
Ive been booked solid with 91mm Ti builds which is nice, however most people just want the matte tumbled look so its not all that exciting to show off the same scales over and over. 

I think this is the first explorer Ive done though.  Finished it today.







« Last Edit: August 15, 2015, 01:11:08 AM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,853
Re: And so it begins.... (My adventures into Alox!)
Reply #2952 on: August 15, 2015, 01:13:25 AM
Love me some Explorer.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #2953 on: August 15, 2015, 01:45:01 AM
Very nice Syph :tu:
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline JP

  • No Life Club
  • ******
    • Posts: 1,118
Re: And so it begins.... (My adventures into Alox!)
Reply #2954 on: August 15, 2015, 02:05:26 AM
Quote from: Syph007 on August 14, 2015, 10:40:50 PM
Quote from: HarleyXJGuy on August 14, 2015, 06:14:59 PM
So is that the new layer you made?

Nope.  Id love one but i think it would have appeal only to Canadians.
OK, what is the quantity we need to buy to make it worth your time?

I'll take one and Toolslinger seems in.

It will be a nice addition to the Bushcrafter that is in the works.

Canadian made cars should use Robertson.....but that is history.

us Offline BADSAK

  • *
  • Full Member
  • ***
    • Posts: 122
Re: And so it begins.... (My adventures into Alox!)
Reply #2955 on: August 15, 2015, 04:08:24 AM
Quote from: Syph007 on August 14, 2015, 03:31:36 AM
Quote from: tommywp on August 14, 2015, 02:16:04 AM
Quote from: Syph007 on August 14, 2015, 01:52:22 AM
Ya I gave it the old college try, but it jsut doesnt work.  The springs are so weird on 91s, they dont accomodate different tools well.  Oh well.

To spice things up I have a new tool layer coming out for 91/93 size that is a drop in replacement for the saw (uses saw backspring).  Its being waterjet right now....  any guesses?  Its one tool but I did up 3 versions of it since I couldnt decide what I liked best.  Its been on my list of requested tools for some time now.

Hmmm....a new blade that isn't a spear point???

Nope not a blade, but that is on the list.  Its something people have asked for alot and there is no version of it currently on 91mm SAKs.

 :think: Cheese slicer?
« Last Edit: August 15, 2015, 04:10:09 AM by BADSAK »
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of a modded knife or multitool with your EDC

au Offline Huntsman

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 5,525
Re: And so it begins.... (My adventures into Alox!)
Reply #2956 on: August 15, 2015, 05:53:51 AM
Quote from: Syph007 on August 14, 2015, 03:31:36 AM
Nope not a blade, but that is on the list. 
It's something people have asked for alot and there is no version of it currently on 91mm SAKs.

Hmm - This kinda implies it is on another length SAK??
Malin spike? 93mm style awl??

Quote from: Syph007 on August 14, 2015, 10:40:50 PM
Nope.  Id love one but i think it would have appeal only to Canadians.

Decking in the UK, and possibly Oz, for some reason uses Robertson screws. But yep, not so common - And would you need a decking screwdriver on your EDC??

So XAVT owner let you keep the left overs Syph? - Nice
- I guess not much use for them, if he is not a modder and now has his perfect EDC.
Really suprised he left out the Cybertools ???
- And to be honest - really suprised anyone tore down an XAVT  at all!! :think:
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must put something in order and provide link to the post.

us Offline tattoosteve99

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,326
Re: And so it begins.... (My adventures into Alox!)
Reply #2957 on: August 15, 2015, 10:18:14 PM
Either a pry bar or a universal wrench?
If I remember correctly, wait, what was I saying?
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 1 MTO branded tool in your collection Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Must buy something on EDCSource

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2958 on: August 17, 2015, 07:08:51 PM
This one was interesting as it's a bladeless model.

I wanted to use the metal file backspring in the blade layer so I could use the phillips on the backside.  The only problem is the metal file layer is thinner by 0.015" than the blade layer.  So what I did was to mill off that much material from the flat pivot area of the phillips driver and it fit like a dream!  :D













PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #2959 on: August 17, 2015, 09:13:19 PM
That's an interesting one Syph :tu:

Sent from my XT901 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,853
Re: And so it begins.... (My adventures into Alox!)
Reply #2960 on: August 18, 2015, 01:51:07 AM
Quote from: tattoosteve99 on August 15, 2015, 10:18:14 PM
Either a pry bar or a universal wrench?

Maybe a universal pry bar?
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ca Offline JP

  • No Life Club
  • ******
    • Posts: 1,118
Re: And so it begins.... (My adventures into Alox!)
Reply #2961 on: August 18, 2015, 03:21:17 AM
I figured out the mystery item after combing this thread and Syph's gallery.....it is obvious to me now.

A Capo.

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,490
Re: And so it begins.... (My adventures into Alox!)
Reply #2962 on: August 18, 2015, 03:50:17 AM
Quote from: JP on August 18, 2015, 03:21:17 AM
I figured out the mystery item after combing this thread and Syph's gallery.....it is obvious to me now.

A Capo.

For a guitar?

Just use a rubber band to hook over each end of the SAK around the neck  :tu:
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo showing the axe in use Start a new thread and post a picture of a fish or fishing kit with a multitool Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a photo of a flashlight as part of your EDC

ca Offline JP

  • No Life Club
  • ******
    • Posts: 1,118
Re: And so it begins.... (My adventures into Alox!)
Reply #2963 on: August 18, 2015, 07:17:32 AM
Quote from: TazzieRob on August 18, 2015, 03:50:17 AM
Quote from: JP on August 18, 2015, 03:21:17 AM
I figured out the mystery item after combing this thread and Syph's gallery.....it is obvious to me now.

A Capo.

For a guitar?

Just use a rubber band to hook over each end of the SAK around the neck  :tu:
Well......that does make it easier. I should add a nice rubber band to my edc.

us Offline BADSAK

  • *
  • Full Member
  • ***
    • Posts: 122
Re: And so it begins.... (My adventures into Alox!)
Reply #2964 on: August 20, 2015, 09:24:44 PM
Please Syph, what is the mystery tool? I can't stand the suspense! :ahhh
« Last Edit: August 20, 2015, 09:38:38 PM by BADSAK »
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #2965 on: August 20, 2015, 09:38:52 PM
Me either man....I have got to see it soon in case I want to add it to my MechaRogue ;)

Sent from my XT901 using Tapatalk
« Last Edit: August 20, 2015, 09:47:13 PM by Monrogue »
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Online MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,343
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #2966 on: August 20, 2015, 09:42:26 PM
Quote from: Monrogue on August 20, 2015, 09:38:52 PM
Me either man....I be got to see it soon in case I want to add it to my MechaRogue ;)

Sent from my XT901 using Tapatalk
Huh :think: what language are you speaking?
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #2967 on: August 20, 2015, 09:46:48 PM
Quote from: MadPlumbarian on August 20, 2015, 09:42:26 PM
Quote from: Monrogue on August 20, 2015, 09:38:52 PM
Me either man....I be got to see it soon in case I want to add it to my MechaRogue ;)

Sent from my XT901 using Tapatalk
Huh :think: what language are you speaking?
JR
Lol, I don't know what I said there...I know what I meant though ;)

Sent from my XT901 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Online MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,343
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #2968 on: August 20, 2015, 09:53:39 PM
Quote from: Monrogue on August 20, 2015, 09:46:48 PM
Quote from: MadPlumbarian on August 20, 2015, 09:42:26 PM
Quote from: Monrogue on August 20, 2015, 09:38:52 PM
Me either man....I be got to see it soon in case I want to add it to my MechaRogue ;)

Sent from my XT901 using Tapatalk
Huh :think: what language are you speaking?
JR
Lol, I don't know what I said there...I know what I meant though ;)

Sent from my XT901 using Tapatalk
I'm glad you did, all I got was I want to add it to my MechaRogue..
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2969 on: August 20, 2015, 10:12:37 PM
Quote from: BADSAK on August 20, 2015, 09:24:44 PM
Please Syph, what is the mystery tool? I can't stand the suspense! :ahhh

I was hoping he'd have the parts cut this week, but looks like I'll have to wait until next week.  Boy this will be a let down if they don't turn out! :D  I'll show what I made anyhow though.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

Pages: 1 ... 97 98 99 100 101 ... 202   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $115.65
PayPal Fees: $7.03
Net Balance: $108.62
Below Goal: $191.38
Site Currency: USD
36% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal