As I have said in a previous post I came home with lots of materials to do lots of modding.
First up I have made up walnut scales for a pocket pal and waiter. Really pleased with the way the turned out.
Next I made up my Frankensteintool. I got a charge al, which was sold as complete with just a pin missing. I had the idea to make up a tti loaded tool which looked different as I can identify it when in amongst other as I stage crew. I had the idea that the pins in a blast would fit(they do although they are a little short) also I could take the scissors and flat driver from it too.
Unfortunately once I received the charge I discovered that the main blade was also missing. Fortunately Metro (Eric) has come to my rescue and supplied me with a wave blade.
Lots of thanks has to go to Eric for the help and support he has given me too with this project. I have learnt a lot from the process, like replacing the washers in between the tools is a major pain in the ass.
Last I revisited a fuse I made bladeless a few months ago. In the original I used a sog file and added a home made awl. I have removed these and replaced them with the saw and file from the Blast. This will probably become my edc for work as I work in a bladeless environment.
Donations
Community Links
