Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


What did you use your Sak on today?

colt 1911 · 11141 · 1101447
« previous next »
Pages: 1 ... 31 32 33 34 35 ... 372   Go Down

ro Offline Corwyn

  • *
  • No Life Club
  • ******
    • Posts: 3,534
Re: What did you use your Sak on today?
Reply #960 on: March 01, 2014, 08:54:48 AM
Used the Tinker blade to unpack, reseal and unpack again my brand new kendo armor package.
Used the Tinker blade to unjam the binding machine (again) than cut my finger (again).  :whistle:

My colleagues started laughing like crazy when I went to the bathroom to wash the blood off the knife first, than from the tweezers, than wiped the water off it, and after than started to wash and bandage my copiously bleeding finger... priorities  :facepalm:

Corwyn of Multitool, the First of His name, King of Victorinox, King of Leatherman, Gerber and the First Generation SOG, Lord of the Seven Wrenches, Protector of the Forum, Khal of the Bushes, called Corwyn Toolborn, the Unsharpened, Father of SAKs.
Merit Badges Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread showing photos of at least 3 different sporks in use Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with photos of your hobo knives in use Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a thread with photos of at least five different colored ALOX models in your collection Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Must put something in order and provide link to the post. Must buy something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: What did you use your Sak on today?
Reply #961 on: March 02, 2014, 02:01:14 AM
Used my Climber today.

Scissors to open snacks for the kids.

Small blade to open packaging on new toys for the kids.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #962 on: March 02, 2014, 05:13:17 AM
Explorer got some good use today opening various toys from our baby girl's first birthday party.  Small blade, scissors and the Phillips driver saw action.
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

cy Offline dks

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,804
  • Δοξα συ ο Θεός
Re: What did you use your Sak on today?
Reply #963 on: March 02, 2014, 09:34:51 PM
I cut some meat with the Pruner
Kelly: "Daddy, what makes men cheat on women?
Al : "Women!"

[ Knife threads ]  [ Country shopping guides ]  [ Battery-Charger-Light threads ]  [ Picture threads ]
Merit Badges Must start a thread with a photo of your stayglow SAK Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore For those who posted like a boss. Start a thread with photos of at least twelve different colored ALOX models in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 1 MTO branded tool in your collection Start a thread with a photo of at least ten OPT's in your collection

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #964 on: March 02, 2014, 10:06:29 PM
I used the scissors on the Explorer to open a bag of parts for a gift we got my older daughter for Christmas to finally put it together :whistle:  Also had to use the straight pin and then toothpick to unclog a nipple on one of the baby's bottles.  Thankfully those should be going away soon.
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,337
  • Plumbers Know Their Crap!!
Re: What did you use your Sak on today?
Reply #965 on: March 03, 2014, 04:23:46 AM
Quote from: Monrogue on March 02, 2014, 10:06:29 PM
I used the scissors on the Explorer to open a bag of parts for a gift we got my older daughter for Christmas to finally put it together :whistle:  Also had to use the straight pin and then toothpick to unclog a nipple on one of the baby's bottles.  Thankfully those should be going away soon.
:rofl: lol, idk why but that got me laughing pretty good, even the wife's giving me funky looks.. Lol JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #966 on: March 03, 2014, 04:31:39 AM
Quote from: MadPlumbarian on March 03, 2014, 04:23:46 AM
Quote from: Monrogue on March 02, 2014, 10:06:29 PM
I used the scissors on the Explorer to open a bag of parts for a gift we got my older daughter for Christmas to finally put it together :whistle:  Also had to use the straight pin and then toothpick to unclog a nipple on one of the baby's bottles.  Thankfully those should be going away soon.
:rofl: lol, idk why but that got me laughing pretty good, even the wife's giving me funky looks.. Lol JR

Haha, leave it to you to have a laugh at that ;)  Here's another one:  I just used the Explorer's main blade to cut the cheese :D
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 38,337
  • Plumbers Know Their Crap!!
Re: What did you use your Sak on today?
Reply #967 on: March 03, 2014, 04:34:59 AM
Quote from: Monrogue on March 03, 2014, 04:31:39 AM
Quote from: MadPlumbarian on March 03, 2014, 04:23:46 AM
Quote from: Monrogue on March 02, 2014, 10:06:29 PM
I used the scissors on the Explorer to open a bag of parts for a gift we got my older daughter for Christmas to finally put it together :whistle:  Also had to use the straight pin and then toothpick to unclog a nipple on one of the baby's bottles.  Thankfully those should be going away soon.
:rofl: lol, idk why but that got me laughing pretty good, even the wife's giving me funky looks.. Lol JR

Haha, leave it to you to have a laugh at that ;)  Here's another one:  I just used the Explorer's main blade to cut the cheese :D
Eww, now that's bad! :rofl: JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread demonstrating paracord knot tying Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of at least 3 different sporks in use Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread showing photos of your outdoor cooking

us Offline NAB

  • Sr. Member
  • ****
    • Posts: 288
  • Swiss Army Hedge Knight
Re: What did you use your Sak on today?
Reply #968 on: March 03, 2014, 04:21:06 PM
Used my Vic Ranger's large driver to pry open the ice-covered mail box.
Sent from Galactica (BS-75)

cy Offline dks

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,804
  • Δοξα συ ο Θεός
Re: What did you use your Sak on today?
Reply #969 on: March 03, 2014, 05:51:05 PM
I cut an apple
Kelly: "Daddy, what makes men cheat on women?
Al : "Women!"

[ Knife threads ]  [ Country shopping guides ]  [ Battery-Charger-Light threads ]  [ Picture threads ]
Merit Badges Must start a thread with a photo of your stayglow SAK Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore For those who posted like a boss. Start a thread with photos of at least twelve different colored ALOX models in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 1 MTO branded tool in your collection Start a thread with a photo of at least ten OPT's in your collection

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #970 on: March 03, 2014, 06:25:01 PM
I used the small blade on my Explorer to open up a package containing my new Syph custom :drool:
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline Bensasupertool

  • No Life Club
  • ******
    • Posts: 1,772
  • Be like The Rifleman
Re: What did you use your Sak on today?
Reply #971 on: March 03, 2014, 06:31:44 PM
Quote from: Monrogue on March 03, 2014, 06:25:01 PM
I used the small blade on my Explorer to open up a package containing my new Syph custom :drool:

Drool indeed :drool: that has to be an exciting unboxing.
CHECK YOUR SMOKE DETECTOR BATTERIES!  Everyone Needs a Halligan Tool.
Merit Badges Must start a thread showing a photo of at least eight BO tools Start a new thread and post a photo of a flashlight as part of your EDC

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #972 on: March 03, 2014, 06:37:12 PM
Quote from: Bensasupertool on March 03, 2014, 06:31:44 PM
Quote from: Monrogue on March 03, 2014, 06:25:01 PM
I used the small blade on my Explorer to open up a package containing my new Syph custom :drool:

Drool indeed :drool: that has to be an exciting unboxing.

Oh it is :D  Taking a bunch of pics of it was fun too.  It's rather photogenic, and the lighting here at work is so much better for taking pics than at home.
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline Bensasupertool

  • No Life Club
  • ******
    • Posts: 1,772
  • Be like The Rifleman
Re: What did you use your Sak on today?
Reply #973 on: March 03, 2014, 07:41:45 PM
Cool, cant wait to see it.
CHECK YOUR SMOKE DETECTOR BATTERIES!  Everyone Needs a Halligan Tool.
Merit Badges Must start a thread showing a photo of at least eight BO tools Start a new thread and post a photo of a flashlight as part of your EDC

cy Offline dks

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 21,804
  • Δοξα συ ο Θεός
Re: What did you use your Sak on today?
Reply #974 on: March 04, 2014, 09:47:41 PM
I peeled an orange
Kelly: "Daddy, what makes men cheat on women?
Al : "Women!"

[ Knife threads ]  [ Country shopping guides ]  [ Battery-Charger-Light threads ]  [ Picture threads ]
Merit Badges Must start a thread with a photo of your stayglow SAK Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore For those who posted like a boss. Start a thread with photos of at least twelve different colored ALOX models in your collection Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread with a photo of custom or non standard SAK scales in your collection Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns) Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with photos of at least 1 MTO branded tool in your collection Start a thread with a photo of at least ten OPT's in your collection

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #975 on: March 05, 2014, 01:50:04 AM
Quote from: Bensasupertool on March 03, 2014, 07:41:45 PM
Cool, cant wait to see it.

Here are a couple pics :D



K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline jerseydevil

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 10,459
  • Join us! Embrace the Flicky Faith!
Re: What did you use your Sak on today?
Reply #976 on: March 05, 2014, 03:05:48 PM
Removing old price labels today at the store, couldn't get any of them up enough to peel off.  That's where the SI's can opener came into play....  :tu:

There's no such thing as "Too pretty to carry".  There's only "Too pretty NOT to carry"...... >:D
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days.

nl Offline bmot

  • No Life Club
  • ******
    • Posts: 4,468
  • Don't judge a tool by it's brand
Re: What did you use your Sak on today?
Reply #977 on: March 05, 2014, 04:38:11 PM
Quote from: jerseydevil on March 05, 2014, 03:05:48 PM
Removing old price labels today at the store, couldn't get any of them up enough to peel off.  That's where the SI's can opener came into play....  :tu:




Did you make that pic right with the scraper blades on purpose?  :D
A knife-carrying guide for the international traveller. : http://forum.multitool.org/index.php/topic,47532.0.html
Merit Badges Must buy something on EDCSource Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: What did you use your Sak on today?
Reply #978 on: March 05, 2014, 04:44:31 PM
Quote from: bmot on March 05, 2014, 04:38:11 PM
Quote from: jerseydevil on March 05, 2014, 03:05:48 PM
Removing old price labels today at the store, couldn't get any of them up enough to peel off.  That's where the SI's can opener came into play....  :tu:




Did you make that pic right with the scraper blades on purpose?  :D

:D Oh the irony. "I need a scraper..." looks at scrapers in package, "Nah", pulls out SAK. :rofl:

us Offline Higgins617

  • *
  • *
  • No Life Club
  • ******
    • Posts: 3,350
Re: What did you use your Sak on today?
Reply #979 on: March 05, 2014, 04:48:18 PM
Quote from: Toolslinger on March 05, 2014, 04:44:31 PM
Quote from: bmot on March 05, 2014, 04:38:11 PM
Quote from: jerseydevil on March 05, 2014, 03:05:48 PM
Removing old price labels today at the store, couldn't get any of them up enough to peel off.  That's where the SI's can opener came into play....  :tu:




Did you make that pic right with the scraper blades on purpose?  :D

:D Oh the irony. "I need a scraper..." looks at scrapers in package, "Nah", pulls out SAK. :rofl:
Nobody amused by the brand of scraper either. :rofl: Good job Jersey, planned or not you win this round
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #980 on: March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer. 
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

00 Offline Caranthanus

  • *
  • No Life Club
  • ******
    • Posts: 1,775
Re: What did you use your Sak on today?
Reply #981 on: March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #982 on: March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be? 
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

00 Offline Caranthanus

  • *
  • No Life Club
  • ******
    • Posts: 1,775
Re: What did you use your Sak on today?
Reply #983 on: March 05, 2014, 09:31:18 PM
Quote from: Monrogue on March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be?
It sounds good - makes great impression  :2tu:

Uff, sorry about that, I should have said "scraper blade"  :whistle:
... the above mentioned vic's can opener :D

btw, I like pruner blade too  :tu:

Offline RedRamage

  • *
  • Sr. Member
  • ****
    • Posts: 380
Re: What did you use your Sak on today?
Reply #984 on: March 05, 2014, 09:36:48 PM
Well, technically this wasn't today... it was  few days back.  But I had to replace a board in a piece of equipment. 

I used the scissors to snip out some wires that were being replaced with the new board.  I also used the scissors to cut some zip ties to remove the old wiring and get it read for the new. 

I used the various screwdrivers to remove parts (and of course replace them later).

I used the main blade to gently pry back some tape over a connector.  I then used the magnifying glass to get a good look at the connector to see if it was just slide in or if there are a minute latch of some sort.

I used the pliers to gently pull out the ribbon cable from the old board and then press it back into the new one.

I used the fish de-hooker to help slide some of cables through some narrow areas. 

And I used the flat head screwdriver in the bitdriver to 'push home' some of the connectors that were being a touch stubborn.
Merit Badges Start a new thread with pictures of a Fish Scaler in use Must update or add a page on SAKWiki Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo of a modded knife or multitool with your EDC

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #985 on: March 05, 2014, 10:20:35 PM
Quote from: Caranthanus on March 05, 2014, 09:31:18 PM
Quote from: Monrogue on March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be?
It sounds good - makes great impression  :2tu:

Uff, sorry about that, I should have said "scraper blade"  :whistle:
... the above mentioned vic's can opener :D

btw, I like pruner blade too  :tu:

Ah, I see now.  I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful.  However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade.  I probably should have just sprung for the utility blade and it would have been that much more perfect to me :tu:
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline jerseydevil

  • Admin Team
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 10,459
  • Join us! Embrace the Flicky Faith!
Re: What did you use your Sak on today?
Reply #986 on: March 05, 2014, 10:40:45 PM
Quote from: Higgins617 on March 05, 2014, 04:48:18 PM
Quote from: Toolslinger on March 05, 2014, 04:44:31 PM
Quote from: bmot on March 05, 2014, 04:38:11 PM
Quote from: jerseydevil on March 05, 2014, 03:05:48 PM
Removing old price labels today at the store, couldn't get any of them up enough to peel off.  That's where the SI's can opener came into play....  :tu:




Did you make that pic right with the scraper blades on purpose?  :D

:D Oh the irony. "I need a scraper..." looks at scrapers in package, "Nah", pulls out SAK. :rofl:
Nobody amused by the brand of scraper either. :rofl: Good job Jersey, planned or not you win this round

 :D  A happy coincidence that those were the labels that needed to be removed.  I figured you guys would catch that instantly.  A 3" 4-way scraper would have been a bit of overkill for the job, plus why open perfectly good merchandise when I already had a tool handy? 
There's no such thing as "Too pretty to carry".  There's only "Too pretty NOT to carry"...... >:D
Merit Badges Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days.

00 Offline Caranthanus

  • *
  • No Life Club
  • ******
    • Posts: 1,775
Re: What did you use your Sak on today?
Reply #987 on: March 05, 2014, 10:57:32 PM
Quote from: Monrogue on March 05, 2014, 10:20:35 PM
Quote from: Caranthanus on March 05, 2014, 09:31:18 PM
Quote from: Monrogue on March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be?
It sounds good - makes great impression  :2tu:

Uff, sorry about that, I should have said "scraper blade"  :whistle:
... the above mentioned vic's can opener :D

btw, I like pruner blade too  :tu:

Ah, I see now.  I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful.  However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade.  I probably should have just sprung for the utility blade and it would have been that much more perfect to me :tu:
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers  :facepalm:
Btw, now you have to make some ranking  :pok: Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools?

ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: What did you use your Sak on today?
Reply #988 on: March 06, 2014, 01:47:25 AM
Quote from: Monrogue on March 05, 2014, 10:20:35 PM
Quote from: Caranthanus on March 05, 2014, 09:31:18 PM
Quote from: Monrogue on March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be?
It sounds good - makes great impression  :2tu:

Uff, sorry about that, I should have said "scraper blade"  :whistle:
... the above mentioned vic's can opener :D

btw, I like pruner blade too  :tu:

Ah, I see now.  I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful.  However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade.  I probably should have just sprung for the utility blade and it would have been that much more perfect to me :tu:

You can always get another custom SAK made...  :pok:

 :D

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: What did you use your Sak on today?
Reply #989 on: March 06, 2014, 03:30:55 AM
Quote from: Caranthanus on March 05, 2014, 10:57:32 PM
Quote from: Monrogue on March 05, 2014, 10:20:35 PM
Quote from: Caranthanus on March 05, 2014, 09:31:18 PM
Quote from: Monrogue on March 05, 2014, 08:58:05 PM
Quote from: Caranthanus on March 05, 2014, 08:53:14 PM
Quote from: Monrogue on March 05, 2014, 04:53:53 PM
I used The Rogue's pruner blade to cut out the seal on a container of coffee creamer.
So, then "The Rogue" is now official name? :D
Masterpiece, but seems it just lacks scraper blade :facepalm:

Yeah I'd say I'm going with that name :tu:  What would the scraper blade be?
It sounds good - makes great impression  :2tu:

Uff, sorry about that, I should have said "scraper blade"  :whistle:
... the above mentioned vic's can opener :D

btw, I like pruner blade too  :tu:

Ah, I see now.  I originally was going to have the can opener, then decided I'd rather have a secondary small blade as I find it quite useful.  However, I would rather had had the utility blade from the Alox Electrician, but decided not to spring for one as I already owned a Pioneer Rancher, which has the pruner blade.  I probably should have just sprung for the utility blade and it would have been that much more perfect to me :tu:
I know that feeling , it's really hard to decide which blade or tool left out. In mind I'm trying to do a 3-4 layer SAK, but then it always came out with at least 6 layers  :facepalm:
Btw, now you have to make some ranking  :pok: Has "The Rogue" prevailed against "Yeochamp" & Explorer ? :D
And, are you missing there some of back-layer & scale tools?

Yeah it's hard to decide.  I do the same, and end up with more layers than originally planned.  The Rogue is basically my perfect custom Alox.  I do wish I'd just gone ahead and paid the few extra bucks to have the Electrician's utility blade (which I do have on my Mechaneer, and possibly could have sent in with the other parts to have him put that blade on the Rogue and the pruner blade on the Mechaneer...hindsight's 20/20 as they say).  Honestly, the pruner blade is sufficient, and at one point I actually preferred it to the Electrician's utility blade, but I just like the shape and how it cut tape to open boxes at work.  It was better for making precise cuts too.  Anyway, I love The Rogue, and am super pleased to have gotten it made. 

As for how it ranks among my main SAKs, the Yeochamp, Explorer and Mechaneer...that's tough.  I could easily say it is and likely will be my favorite, but that could be the newness factor.  I am sure that the Mechaneer has been replaced as my favorite Alox though.  I may actually not even end up carrying it much anymore as I'm trying to limit my EDC lineups.  I actually think I may prefer my new Explorer Plus to my Yeochamp as well, but that could be because I got my initials engraved on the main blade.  Another factor in favor of the cellidor models is, as you mentioned, the scale and back tools.  I love the sort of total package of the cellidor models I have, but I can honestly say I rarely use the back or scale tools.  This makes my Rogue that much more likely to be my favorite due to it's smooth, sleek design.  It has all the tools I really want/need in a SAK, and it looks awesome in my favorite color scheme of black/red :tu: 
K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Must buy an item through the MTo Store Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

Pages: 1 ... 31 32 33 34 35 ... 372   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $70.65
PayPal Fees: $4.43
Net Balance: $66.22
Below Goal: $233.78
Site Currency: USD
22% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal