Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Dawdling with Demel

Demel · 345 · 22032

us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #180 on: July 08, 2016, 04:48:43 PM
Bummer about the Cryo, I think it a pretty sweet knife even tho mine doesn't get much pocket time anymore.  The Leek is also pretty terrific.  Really thin so no matter how you carry it it disappears nicely.
The Leek is ok. A little slippery. How much better is the sandvick steel over the 8cr?
Would be good.   :tu:   :tu:   Until then I will use the coffee one from the poll. (Image removed from quote.)
:imws:
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #181 on: July 08, 2016, 11:42:06 PM
:nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance: :nanadance:



Leatherman Rebar
CS Mini Recon 1
Victorinox Executive
Thrunite T10T

I really wanted to keep the code 4, but they don't make a mini version of it. I was impressed at the quality of Cold Steel so I wanted to try again. Enter the Mini Recon 1 in clip point. :drool: every review I've seen of this knife has been great. Got it for myself. I will try this carry setup for a month to get an idea of how well it all works together.
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #182 on: July 09, 2016, 12:58:54 AM
 :popcorn:


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #183 on: July 09, 2016, 10:26:35 PM
Returned the Leek today in exchange for the Cryo. I like trying new knives but I didn't have the same confidence in the Leek. Glad to have the Cryo back.

All the reviews on the mini recon 1 are 100% accurate. The knife is wicked sharp and slices through cardboard like butter. The locks are strong. Almost too strong. It takes a lot of strength to unlock the blade. Cold Steels triad lock is no joke. Also, the g10 scales are really aggressive. I had to take a file to smooth them out just a little. Not sure what makes them so aggressive but a pass with a file made it manageable. I'll try to get a pic later today. It carries well. If I could I would get deep carry clips on all my knives. Despite not having one the Recon is really slim and feels good to pocket carry.
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline kaput

  • No Life Club
  • ******
    • Posts: 2,555
Re: Dawdling with Demel
Reply #184 on: July 10, 2016, 12:50:43 AM
The cryo is nice. I like the blade shape. At one point I was looking at the intellect and the fatback. The intellect in particular, I like flippers. I may try one at some point, but it's down there on the list. Did you ever consider one of those others?
multi-tools—folding contraptions fixed with all kinds of doo-dads


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #185 on: July 10, 2016, 03:41:01 AM
The cryo is nice. I like the blade shape. At one point I was looking at the intellect and the fatback. The intellect in particular, I like flippers. I may try one at some point, but it's down there on the list. Did you ever consider one of those others?
I hadn't considered them. But the intellect looks like a winner. Know I must add that to the list :facepalm:
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #186 on: July 10, 2016, 03:41:01 AM
Double post. I'm tired of Tapatalk
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #187 on: July 10, 2016, 05:23:17 AM
Double post. I'm tired of Tapatalk

What phone are you using :think:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #188 on: July 10, 2016, 05:24:26 AM
I am using a Samsung Galaxy S5 and just use the regular site :tu: Whoey also said that the mobile site has been improved lately and is better than tapatalk as well :cheers:


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #189 on: July 10, 2016, 05:27:01 AM
I am using a Samsung Galaxy S5 and just use the regular site :tu: Whoey also said that the mobile site has been improved lately and is better than tapatalk as well :cheers:
Google Nexus 5x

I think I will. Tapatalk is constantly changing and not getting better. I may have to switch to the mobile site
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #190 on: July 10, 2016, 05:38:42 AM
Yeah Whoey said tapatalk (which I have never really used myself) just wasn't worth all the trouble it caused now :-\
« Last Edit: April 18, 2019, 01:04:41 PM by Poncho65 »


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #191 on: July 10, 2016, 05:41:01 AM
The Nexux 5x has a fairly good sized screen doesn't it :think: I have a 5.1 inch screen and after a bit of getting use to zooming in and out the regular site is just fine for me :cheers: That way I am familiar with it and everything works like it should :tu: Just the same as my laptop and desktop this way :cheers:


us Offline Kampfer

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,287
  • Tactical Desk Jockey
Re: Dawdling with Demel
Reply #192 on: July 16, 2016, 08:19:37 PM
With Kampfer sending me an awl for my wave and some parts from Loki, I will finally be able to make the wave perfect.
:worthless:
EDC: Black Talon, Black Cat, Spirit, LD02


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #193 on: July 18, 2016, 05:24:53 AM
It's been a little since I've put up any updates, which was intentional  >:D but for good cause. First the Recon 1 has been a good knife to me. A really good knife. I've used it everyday at work and it has performed without fail.



I've also gotten a few new toys in the process. The CRKT M16, Spyderco Sharpmaker, and Lansky Turnbox. The sharpmaker is still on its way, but I have used the turnbox and I am impressed at how well it sharpens. Really easy to use and puts a good edge on my blades. I wanted to get a good sharpening system with all the new blades I have. I needed a way to maintain my knives. Question about the turnbox; has anyone added other degrees to the frame? It only has 20 and 25 degrees. Wondered if someone has a mill or something to add 15. Just curious.



I also got my first fixed blades this week :nanadance: SOG seal pup elite, and Kabar Short. I have no real need for them, but I do have a camping trip coming up and wanted a little more knife  :whistle:



Just in case. Lastly, with the help of Loki and Kampfer the biggest mod I have done in a long time is now complete. It still needs tweaks but the overall concept is done. It's not the mini surge nor the recharge. It's the WaveÂł



Three simple changes that I've been wanting for a while now. Serrated Blade with hook, awl, and Rebar plier head. The only hesitation I had is with the plier head. I actually like the non replaceable cutters better for hard wire cutting, so instead of losing them completely I put them on my Rebar. Switching the pliers caused many a :bnghd:  :bnghd:  :bnghd: but eventually it came together. I was tempted to put the s30v plain edge blade on as well but decided against it. I have folders with “super steels” and Iike my mt blades to be easier to maintain. All in all this is my take on what Leatherman should do for the Wave update. It doesn't need a complete overhaul like the previous stage. Just a tune-up.


Anything I miss? :think:

Couple of pics





"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #194 on: July 18, 2016, 05:44:14 AM
I have had a sharpmaker for years and love it :tu: I do freehand sharpen most of the time but you can't go wrong with the sharpmaker :cheers: If you are like me then you will sharpen every knife in the kitchen and all that you own in a matter of days :D


us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,460
Re: Dawdling with Demel
Reply #195 on: July 18, 2016, 05:50:55 AM
Nice job on the Wave D   :cheers:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #196 on: July 18, 2016, 05:53:20 AM
Nice job on the Wave D   :cheers:


Yes that is a fine mod :cheers: I got caught up talking about the Sharpmaker and forgot to mention that :facepalm:


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #197 on: July 18, 2016, 06:00:27 AM
Thanks Steve. And yes Poncho I actually used my kitchen knives as testers before my folders :facepalm:
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #198 on: July 20, 2016, 01:31:03 AM
We have a trip coming up. The hardest part was figuring out what I was going to carry. I wanted to bring one setup to carry the whole time. Eventually I settled on this setup. WaveÂł with bit kit, Explorer Plus, Thrunite T10T, Fisher Space Pen-Bullet, and a off brand watch. I'll have a pack with me so the wave will travel there. Everything else will be on my person. I don't think I'll need the wave, but just in case.

 
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: Dawdling with Demel
Reply #199 on: July 20, 2016, 03:03:13 AM
Looks like you got it all covered :tu:
K-Tibbs


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #200 on: July 20, 2016, 03:54:23 AM
Never hurts to be over prepared when traveling ;) :tu:


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #201 on: July 20, 2016, 05:00:06 AM
Thanks Mon. I think it's time you start your own thread so we can keep up with you  :pok:

I agree Poncho. I was going to go extra light, but usually the day you don't have your tool is when you need it most. And considering I'll be away from the stash I'd rather be ready.
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #202 on: July 20, 2016, 05:44:34 AM
Thanks Mon. I think it's time you start your own thread so we can keep up with you  :pok:

I agree Poncho. I was going to go extra light, but usually the day you don't have your tool is when you need it most. And considering I'll be away from the stash I'd rather be ready.

I usually carry my Swisschamp and my Wave with all the extras as well :D Plus whatever MT I am carrying with me at the time :tu: Also if it over a week long vacation I take more sometimes ::) Don't tell my wife that is why the luggage is so heavy :whistle:


us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,460
Re: Dawdling with Demel
Reply #203 on: July 20, 2016, 05:46:04 AM
Never hurts to be over prepared when traveling ;) :tu:

+1

Better to have and not need than to need and not have  :tu:


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Dawdling with Demel
Reply #204 on: July 20, 2016, 05:50:04 AM
It's what I tell my wife but she still has her doubts ::) :D
« Last Edit: April 18, 2019, 01:08:39 PM by Poncho65 »


us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: Dawdling with Demel
Reply #205 on: July 20, 2016, 06:57:33 AM
Thanks Mon. I think it's time you start your own thread so we can keep up with you  :pok:

I agree Poncho. I was going to go extra light, but usually the day you don't have your tool is when you need it most. And considering I'll be away from the stash I'd rather be ready.

I've thought about it, but I don't think it'd be as interesting at this point.  Earlier on in my MT/SAK journey would've been better.  Maybe though, it could be fun :tu:
K-Tibbs


us Offline Aloha

  • Global Moderator
  • *
  • Point Of No Return
  • *
    • Posts: 31,235
Re: Dawdling with Demel
Reply #206 on: July 20, 2016, 07:26:34 AM
Great Wave mod.  I was looking at my OG Wave today and was considering some things.  Then I realized I didn't have a 5 point torx bit  :facepalm:
Esse Quam Videri


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #207 on: July 20, 2016, 04:27:41 PM
I've thought about it, but I don't think it'd be as interesting at this point.  Earlier on in my MT/SAK journey would've been better.  Maybe though, it could be fun :tu:
Understandable. I use it for my more reflective thoughts. I didn't want to derail other threads with my ramblings. Plus I have enough tools to rotate and try different combos at this point. So even if I don't try anything new, I can still nix it up. Give it some thought.

Great Wave mod.  I was looking at my OG Wave today and was considering some things.  Then I realized I didn't have a 5 point torx bit  :facepalm:.

PM sent
« Last Edit: April 18, 2019, 01:09:30 PM by Poncho65 »
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: Dawdling with Demel
Reply #208 on: July 20, 2016, 04:52:01 PM
My local hardware store has a buck 110 and 119 I've been considering. The 110 I think will happen. The 119 I'm on the fence about. Any thoughts
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden


wales Offline magentus

  • Admin Team
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,876
  • mmmmm SAKrelicious
Re: Dawdling with Demel
Reply #209 on: July 20, 2016, 05:00:21 PM
My local hardware store has a buck 110 and 119 I've been considering. The 110 I think will happen. The 119 I'm on the fence about. Any thoughts
The Buck 110 is one of those iconic knives isn't it? Like the Opinel, Ka-Bar, SAK etc. I'd say go for it. And show us pictures.
'Use the force Harry' - Gandalf


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $42.16
PayPal Fees: $2.92
Net Balance: $39.24
Below Goal: $260.76
Site Currency: USD
 13%
April Donations

Community Links


Powered by EzPortal