Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Probably done to death. But my newly clipped crunch

munecito · 19 · 2201
« previous next »
Pages: 1   Go Down

au Offline munecito

  • Full Member
  • ***
    • Posts: 196
Probably done to death. But my newly clipped crunch
on: September 19, 2021, 06:51:43 AM
This one is probably done many times. But it was a bit unnerving because it was a brand new Crunch.

The clip is from a Rev, Sidekick, Wingman, but it didn't come from a tool. I bought it for doing this little project.

I was inspired by Aaron Mooney in the facebook groups.


nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Probably done to death. But my newly clipped crunch
Reply #1 on: September 19, 2021, 06:54:04 AM
 :like:

I'm not sure I've seen one with that particular clip. I think wspeed's is a Kick clip.  :think:

au Offline munecito

  • Full Member
  • ***
    • Posts: 196
Re: Probably done to death. But my newly clipped crunch
Reply #2 on: September 19, 2021, 07:20:07 AM
Quote from: Syncop8r on September 19, 2021, 06:54:04 AM
:like:

I'm not sure I've seen one with that particular clip. I think wspeed's is a Kick clip.  :think:

With the right drill and tap set the clip from the Free could be added too. It would look beautiful although the steel is quite hard. I broke two bits and didn't make much progress. I read somewhere online that a masonry bit would work. I didn't believe it but had a go because I ran out of bits.

It took some lubrication and patience but it did the trick.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #3 on: September 19, 2021, 03:31:12 PM
First I have seen with the Sidekick/Wingman clip :salute: the Free Clip would probably be a good direction to take as well :cheers:

Great mod :like:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

au Offline munecito

  • Full Member
  • ***
    • Posts: 196
Re: Probably done to death. But my newly clipped crunch
Reply #4 on: September 20, 2021, 08:39:50 AM
Quote from: Poncho65 on September 19, 2021, 03:31:12 PM
First I have seen with the Sidekick/Wingman clip :salute: the Free Clip would probably be a good direction to take as well :cheers:

Great mod :like:

I just don't have the tools for such precision drilling and tapping job. But would love to see one with that clip.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #5 on: September 21, 2021, 03:06:05 PM
Drilling isn't that hard but I can't get it to tap and I broke the first tap I bought and haven't bought another :whistle: :facepalm: :oops:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

wales Offline GearedForwards

  • No Life Club
  • ******
    • Posts: 2,720
Re: Probably done to death. But my newly clipped crunch
Reply #6 on: September 21, 2021, 08:08:12 PM
Quote from: Poncho65 on September 21, 2021, 03:06:05 PM
Drilling isn't that hard but I can't get it to tap and I broke the first tap I bought and haven't bought another :whistle: :facepalm: :oops:

Would the drilling be easy due to n abundance of masonry bits  :pok:
Check out my Youtube channel  for gear reviews, comparisons, and carry philosophy.

Love belt carry? Consider doing the Batman Challenge!
Merit Badges Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread demonstrating paracord knot tying Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a picture of fire making kit or fire with a multitool In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #7 on: September 22, 2021, 03:43:13 AM
No I had a HSS bit :think: the stupid tap was just so tiny :facepalm: :D
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Probably done to death. But my newly clipped crunch
Reply #8 on: September 22, 2021, 05:24:49 AM
Quote from: Poncho65 on September 21, 2021, 03:06:05 PM
Drilling isn't that hard but I can't get it to tap and I broke the first tap I bought and haven't bought another :whistle: :facepalm: :oops:
Don't faucet.

au Offline munecito

  • Full Member
  • ***
    • Posts: 196
Re: Probably done to death. But my newly clipped crunch
Reply #9 on: September 22, 2021, 01:07:24 PM
Quote from: Poncho65 on September 22, 2021, 03:43:13 AM
No I had a HSS bit :think: the stupid tap was just so tiny :facepalm: :D

You probably have a press drill. I did that with an 18V one.  :rofl: :rofl: :rofl: :rofl:

My HSS got blunt quite quickly.

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #10 on: September 22, 2021, 07:00:32 PM
Quote from: munecito on September 22, 2021, 01:07:24 PM
You probably have a press drill. I did that with an 18V one.  :rofl: :rofl: :rofl: :rofl:

My HSS got blunt quite quickly.

No drill press I just use a battery hand drill for everything  :cheers: I had one bit that would barely scratch the stainless :facepalm: then I had a kit of drill bits and the correct size of that one went straight through the handle  :o :D
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

Offline Heavyduty

  • New User
    • Posts: 1
Re: Probably done to death. But my newly clipped crunch
Reply #11 on: October 24, 2021, 08:08:41 PM
First post, but i saw this and had to try it with an old rev. The picture doesnt want to post, but i flipped the chicago screw, put a 632 screw and washer and made the locking notch with a carbide dremel bit

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #12 on: October 24, 2021, 09:23:22 PM
Welcome to :MTO:  and sounds like a great mod :tu: :like:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,434
Re: Probably done to death. But my newly clipped crunch
Reply #13 on: October 24, 2021, 09:27:46 PM
Tip for tapping (excuse the pun): I find stainless steel to be a bit hard on those taps that cut the whole thread in one go. I prefer the old-fasioned sets of three with increasing thread depth.
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

Offline cnlson

  • Sr. Member
  • ****
    • Posts: 496
Re: Probably done to death. But my newly clipped crunch
Reply #14 on: December 22, 2022, 06:28:00 AM
I have been wanting a clip for my crunch for a long time but the kick clip has been out of stock everywhere forever. I actually found a place that said online they had 600 kick clips and contacted them to buy a bunch they checked and replied it was an inventory error.

So i was searching MTO and came upon this thread. PM'd the poster how it was holding up and he was still really happy with it, So off to ebay, I found the clip no problem but the hex hole is actually larger than the chicago screw on the crunch,
  [ You are not allowed to view this attachment ]  
So I ended up also getting the pivot that is used in the rev/sidekick/wingman as well since it has a hex interface for the clip built into the screw.
  [ You are not allowed to view this attachment ]  
while cutting the hole for the locator on the clip I broke 1/16" hss bit and 3/32 cobalt bit.
  [ You are not allowed to view this attachment ]  
But I was able to get a hole done and it fits with just a bit of slop.
  [ You are not allowed to view this attachment ]  




Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

Offline cnlson

  • Sr. Member
  • ****
    • Posts: 496
Re: Probably done to death. But my newly clipped crunch
Reply #15 on: December 22, 2022, 06:31:34 AM
I put the clip on the other side compared to the OP as i wanted to put it in my right hand pocket. Here it is in good company

  [ You are not allowed to view this attachment ]  

Thanks to munecito for this post!
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

au Offline munecito

  • Full Member
  • ***
    • Posts: 196
Re: Probably done to death. But my newly clipped crunch
Reply #16 on: December 22, 2022, 08:03:46 AM
That looks great @cnlson

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: Probably done to death. But my newly clipped crunch
Reply #17 on: December 22, 2022, 12:57:42 PM
 :iagree: Great work :salute: :like: :like:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,534
Re: Probably done to death. But my newly clipped crunch
Reply #18 on: December 22, 2022, 02:01:27 PM
 :iagree: :tu:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

Pages: 1   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $135.65
PayPal Fees: $8.11
Net Balance: $127.54
Below Goal: $172.46
Site Currency: USD
43% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal