Question about PPPs

[kirk13]

I'm not sure if this should be over in the mod squad but here goes...

I've got a PPP on its way to me.I'm curious to know if the V cutter can be fitted to it?If so it would make for a handy UK legal rescue MT.I've had a look at SOGs homepage,which says its not compatable,but hey,these things lie!

Would appreciate your input,and other suggestions for fun tools to add to the Sog when I get it

[Mike 208]

According to the SOG website, the V-cutter is only compatable with the PowerLock, EOD PowerLock and the PowerAssist.

[J-sews]

I've never tried it, but I can't see any reason why it wouldn't fit..?

[jekostas]

I know Yud and a few others put a v-cutter in to a Paratool.  It should fit fine in one of the "long" tool slots I would think.

[Dr. Bahn]

I once tried to put a V-Cutter into my PPP but if I remember right, it didn´t work because of the bolts which fix the blades stood out too much and hit on the scale. It should work on a PPP Deluxe with the V-Cutter being the only large tool though.

Hope I could help and that you got my point because I had some problems with the translation. 

[kirk13]

Thanks for the info guys...the PPP has arrived and slipped into my EDC,the Vcutter is on order,so watch this space

[Nutznboltz]

The V-cutter does indeed fit the ppp,  you will need a spacer though because it is narrower than the other components.  I have it set up as - spacer, v-cutter, large flat screwdriver, robertson, philips in my ppp and it works out perfectly.

[Neil]

My son has the v-cutter in his PT-510 (so same deal as PPP).  As others have pointed out its not perfect (rivets rub on the side a bit) but it really isn't bad at all. 

Its a big inprovement over the horrible SOG scissors that were in there.

[Dr. Bahn]

Looking at my PPP again it might really work with a thin spacer. I made the V-Cutter fit into my Paratool using a spacer half a year ago. Works perfectly!    However I never tried it with a spacer on my PPP...