Show off your Sak mod's!

Neil · **Reply #930 on:** October 09, 2009, 11:32:14 PM

Nice and big too. No accidentally inhaling bushings

Spork, Lord of Lime Jello! · **Reply #931 on:** October 09, 2009, 11:58:37 PM

Quote from: Neil on October 09, 2009, 09:50:31 PM

Quote from: Gareth on October 09, 2009, 03:54:18 PM
I have to say this having to balance out the sides is making my brain hurt.

I think if it were me I'd go for something like this: main blade+small file, orange peeler, combo tool, scissors. Almost all of the original functions of the Executive but with the added combo tool. In fact that sounds like a rather good SAK to me, something to have a go at myself in the future (even if you decide to do it ).

I hate to break it to you but that doesn't balance either $:-\$ Things get even more fun if you try and tools from other sized SAKs

Yeah I noticed that right away this morning...didn't say anything at the time because I was afraid his melon would explode

Taninaree · **Reply #932 on:** October 25, 2009, 07:39:54 AM

Hi' Guy , I just finished my project on the newer scale , There are made from printed circuit board of old DDR- RAM.

Freudian Frog · **Reply #933 on:** October 25, 2009, 08:05:17 AM

Quote from: Taninaree on October 25, 2009, 07:39:54 AM

Hi' Guy , I just finished my project on the newer scale , There are made from printed circuit board of old DDR- RAM.

Wow!

What a great idea... if I ever own a CyberTool that's what I'm doing!

Oh, and I don't think I've ever welcomed you, so.... welcome!

cgk · **Reply #934 on:** October 25, 2009, 08:13:06 AM

Very cool scales you have there.

Mike, Lord of the Spammers! · **Reply #935 on:** October 25, 2009, 08:40:53 AM

There superb mate

AHB · **Reply #936 on:** October 25, 2009, 08:40:59 AM

Quote from: Taninaree on October 25, 2009, 07:39:54 AM

Hi' Guy , I just finished my project on the newer scale , There are made from printed circuit board of old DDR- RAM.
(Image removed from quote.)

Hands down, that's one of the coolest scales I ever seen...

Great job and clever thinking..

Taninaree · **Reply #937 on:** October 25, 2009, 09:00:24 AM

Thank you very much for all guy came to see my work . Some of another scale made from wood ,they are order from ebay .That my first time to used import material ! .

Taninaree · **Reply #938 on:** October 25, 2009, 09:02:31 AM

Santos · **Reply #939 on:** October 25, 2009, 09:10:14 AM

love the printed circuit board definately go well with a Cybertool. Any lans to add the tweezer and toothpick grovoves? or engraving the victorinox emblem?

MultiMat · **Reply #940 on:** October 25, 2009, 09:44:48 AM

Quote from: Taninaree on October 25, 2009, 07:39:54 AM

Hi' Guy , I just finished my project on the newer scale , There are made from printed circuit board of old DDR- RAM.

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

That looks very cool reminds me of the Camillus Cuda Circuit Board , which I am very keen to own one day

Ninjaz · **Reply #941 on:** October 25, 2009, 02:44:58 PM

Quote from: Taninaree on October 25, 2009, 07:39:54 AM

(Image removed from quote.)

This is awsome.

It is the best scales I even saw and now I got to get one of those - Anyone going to make some of those ?

nuphoria · **Reply #942 on:** October 25, 2009, 04:26:27 PM

I'd like to have a go at those too but definitely on a cybertool

Neil · **Reply #943 on:** October 25, 2009, 04:32:24 PM

I've seen circuit board scales before but I think these ones work better because of the high density of traces/paths. Very nice

Benner · **Reply #944 on:** October 25, 2009, 06:32:09 PM

Fantastic work mate.

jzmtl · **Reply #945 on:** October 25, 2009, 11:53:46 PM

That's a very good idea for scale!

Dang I have a cybertool coming, but all my scrap RAM's have components on both side.

Taninaree · **Reply #946 on:** October 26, 2009, 02:10:57 AM

Quote from: jzmtl on October 25, 2009, 11:53:46 PM

That's a very good idea for scale!

Dang I have a cybertool coming, but all my scrap RAM's have components on both side.

Welcome Sir' Hope you like it

The components , I used the Hot-Air + desoldering workstation to take it out.

Ben X · **Reply #947 on:** October 26, 2009, 08:18:09 AM

Watch out, Vic will be offering that soon if you go posting that too much! Seriously, set up shop and make a ton of those if it doesn't take a month and a half for each pair

Seriously, this is the coolest scale job I have ever seen. As others have said, the only way it could be better is to grove it our for the tweezers, toothpick, and hey, might as well do the pen slot too!

Excellent work mate

Santos · **Reply #948 on:** October 26, 2009, 10:06:38 AM

yes providing i dont need to ransom a small island nation i wold buy one

Taninaree · **Reply #949 on:** October 26, 2009, 11:31:19 AM

Quote from: Ben X on October 26, 2009, 08:18:09 AM

Watch out, Vic will be offering that soon if you go posting that too much! Seriously, set up shop and make a ton of those if it doesn't take a month and a half for each pair Seriously, this is the coolest scale job I have ever seen. As others have said, the only way it could be better is to grove it our for the tweezers, toothpick, and hey, might as well do the pen slot too! Excellent work mate

Thank you , Also I have to plan insert all your recommend option to next version as soon as I can . thank again for goot coments.

Regards.

Neil · **Reply #950 on:** October 26, 2009, 03:12:25 PM

Another tip for removing components if you never intend to use them again is a heat gun. It works well and fast but you have to be careful not to burn the board.

If you have an old clothes iron of the travelling variety that fold flat they can be used (upside down) as well.

We're getting seriously into the territory of maiming, injuring, burning down of houses etc. here.

So don't do any of the above you hear

jzmtl · **Reply #951 on:** October 26, 2009, 08:49:10 PM

Ohh, looks like it's soldering iron time.

Sure hope I don't F it up being it's my first scale job, I only have one pair of spare RAM.

ari6126 · **Reply #952 on:** November 01, 2009, 12:38:10 AM

Tinnie made me two sets of scales. They look great. I mounted one set a Champion and one set on a Deluxe Tinker. Thanks Tinnie!

nuphoria · **Reply #953 on:** November 01, 2009, 01:13:45 AM

They look fabulous... but didn't you fancy the Israeli flag on blue?!

ari6126 · **Reply #954 on:** November 01, 2009, 01:15:17 AM

It's a gift and my cousin likes green more. They are actually both gifts, with a Fenix E01.

Taninaree · **Reply #955 on:** November 01, 2009, 03:45:55 PM

That's The newer of my friend projects based on carbon fiber scale. Tks.

Taninaree · **Reply #956 on:** November 01, 2009, 03:47:41 PM

Santos · **Reply #957 on:** November 02, 2009, 11:57:15 AM

pictures for the carbon fibre scales are not loading....

Mike 56 · **Reply #958 on:** November 05, 2009, 01:00:38 AM

Today i did some easy mods to practice.

The frist mod i did was make a 91mm Gourmet out of a Tinker. (Garth's mod)

The second mod was a apprentice made from a Waiter. The Philip blade came from the Tinker (Neil's mod) http://forum.multitool.org/index.php/topic,9057.15.html

The third mod was Garth's Huntsman Lite that i added new white plus scales and added a second set of tweezers (Neil's mod)

Benner · **Reply #959 on:** November 05, 2009, 01:01:57 AM

Good work

Hello Lurker! Remove this ad and much more by logging in.

Show off your Sak mod's!

Donations

Community Links