Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


BO "spare parts" Rebar.... as a giveaway!

Breezy12 · 62 · 3000
« previous next »
Pages: 1 2 3   Go Down

us Offline Breezy12

  • No Life Club
  • ******
    • Posts: 2,026
BO "spare parts" Rebar.... as a giveaway!
on: October 28, 2017, 07:33:33 AM
In the spirit of thinning the herd and letting go of unused tools, I would like to host a modest giveaway. :D

I have done quite a few mods over the last few years, both for myself and for others. One thing that never ceases to amaze me is when people have no interest in what I like to call the "spare parts" Rebar... basically taking all the spare parts left over from a ReCharge or Mini Surge mod and putting them back together in the Rebar handles. (I normally do this for free when working on a mod project.) Personally, I think it makes a great tool to stash in a kitchen drawer, glove compartment of the car, nightstand, wherever. It's still a very useful tool, IMO.

In any case, I did a BO Mini Surge mod for a guy a couple years ago, and he had no interest in the spare parts. They have been sitting in my parts bin for that entire time, so I decided to put them together and list it up here as a giveaway. :D



Please note that there are some scratches on the pivots/screws, mostly because I did this mod way back before I invested in a set of engineer pliers for my mod work. :facepalm:

Other than that, it has the large and small bit drivers from the Wave, along with the scissors. (It still has the Rebar saw and serrated blade... I am not sure why I didn't take them out for the picture.)

All you need to do to enter is add your favorite number (from 1 to 1000) to the list, and tell me where you'll stash this spare parts Rebar and/or what you'll use it for if you win. :cheers:

To get things started:

000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason

I will use a random number generator to choose a winner after one week.

good luck! :cheers:
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread demonstrating paracord knot tying Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must put something in order and provide link to the post. Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of a Japanese made PST in your collection

us Offline zrxoa1

  • *
  • No Life Club
  • ******
    • Posts: 4,553
BO "spare parts" Rebar.... as a giveaway!
Reply #1 on: October 28, 2017, 07:40:56 AM
.
« Last Edit: October 28, 2017, 07:45:14 AM by zrxoa1 »
Merit Badges Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with photos of your Mora knives in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread showing a photo of at least five BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days.

us Offline zrxoa1

  • *
  • No Life Club
  • ******
    • Posts: 4,553
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #2 on: October 28, 2017, 07:44:37 AM

000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0010 - zrxoa1 - stash it in console of my truck




Sent from my iPhone using Tapatalk
Merit Badges Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Start a new thread with photos of at least 5 different 111mm models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with photos of your Mora knives in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the 111mm sak for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread showing a photo of at least five BO tools Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days.

Offline karlito

  • Jr. Member
  • **
    • Posts: 60
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #3 on: October 28, 2017, 07:45:49 AM
0117 karlito   I'll keep it in my work bag
Thanks for the offer

sent from your mamma's house

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #4 on: October 28, 2017, 07:55:47 AM
Thanks for the opportunity... What an awesome GAW...

000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0010 - zrxoa1 - stash it in console of my truck
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar


Sent from my iPhone using Tapatalk
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #5 on: October 28, 2017, 08:22:37 AM
Awesome!

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar
Merit Badges Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread with a photo of your stayglow SAK Start a new thread with a photo showing the Hook in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your Buck knives in use Must put something in order and provide link to the post. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread with photos of your chainsaws Start a new thread with photos of your titanium gear with a multitool or sak Test,please ignore Must start a thread with a photo of your birth year SAK Start a thread with a photo of a repair you made with duct tape Start a new thread with a photo of custom or non standard SAK scales in your collection Must start a thread with a photo of at least five (5) of your watches

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #6 on: October 28, 2017, 02:50:34 PM

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Must buy an item through the MTo Store Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ph Offline an0nemus

  • *
  • No Life Club
  • ******
    • Posts: 2,717
  • I Tool Therefore I Am
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #7 on: October 28, 2017, 04:09:54 PM
0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo showing the Hook in use Start a new thread with photos of your zip ties in use

be Offline Top-Gear-24

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,808
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #8 on: October 28, 2017, 04:12:05 PM
I really like the looks of this "spare parts" Rebar  :drool:.

Thank you for this generous giveaway  :hatsoff:.

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Merit Badges Must start a thread with a photo of your birth year SAK Must buy something on EDCSource Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your stayglow SAK You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of at least 8 different 130mm models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your Mora knives in use Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread and post a photo of the leatherman (blast, wave or charge) for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a thread with a photo of a repair you made with duct tape Must start a thread with a photo of at least five (5) of your watches Must start a thread showing a photo of at least five BO tools Start a new thread and post a photo of a flashlight as part of your EDC

dk Offline T14

  • *
  • Hero Member
  • *****
    • Posts: 660
  • Embrace the SAK
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #9 on: October 28, 2017, 04:42:09 PM
Quote from: Top-Gear-24 on October 28, 2017, 04:12:05 PM
Thank you for this generous giveaway  :hatsoff:.

+1

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
All I know is that I don't know anything - but I can't prove it!
Merit Badges Must start a thread with a photo of your birth year SAK Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of custom or non standard SAK scales in your collection Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the minimal sak (2 layers or fewer) for thirty (30) consecutive days.

us Offline cody6268

  • Absolutely No Life Club
  • *******
    • Posts: 6,230
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #10 on: October 28, 2017, 05:35:27 PM
0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Merit Badges Participate in a Challenge thread, carry a Buck knife or tool, and post a photo every day for 30 consecutive days. Participate in a Challenge and post a photo of a Utility Knife for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Participate  in Challenge thread and post a photo of a SAK Soldier for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Fieldmaster SAK for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the Vic Huntsman for thirty (30) consecutive days. Start a new thread with photos of your zip ties in use

id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #11 on: October 28, 2017, 05:48:52 PM
Quote from: T14 on October 28, 2017, 04:42:09 PM
Quote from: Top-Gear-24 on October 28, 2017, 04:12:05 PM
Thank you for this generous giveaway  :hatsoff:.

+1

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Choose 1 - 1000, Chief...


Sent from my iPhone using Tapatalk
Merit Badges Must start a thread showing a photo of at least five BO tools You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must start a thread with a photo of your stayglow SAK Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your camo SAK Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the copper flashlight for thirty (30) consecutive days. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

us Offline lichan

  • Sr. Member
  • ****
    • Posts: 397
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #12 on: October 28, 2017, 05:53:45 PM
Thanks for this great GAW.

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0750 - lichan - I'll put it in my small everyday-carry sling bag.
2547 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your EDC watch

ph Offline an0nemus

  • *
  • No Life Club
  • ******
    • Posts: 2,717
  • I Tool Therefore I Am
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #13 on: October 28, 2017, 06:13:33 PM
Correction:

Thanks for this great GAW.

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
Merit Badges Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Must start a thread with a photo of your birth year SAK Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with a photo showing the Hook in use Start a new thread with photos of your zip ties in use

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,434
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #14 on: October 28, 2017, 06:44:24 PM


Many thanks for this great GAW Breezy! :tu:

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!

Sent on my SM-G930F with Tapatalk

Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

00 Offline Film School EDC

  • Newbie
  • *
    • Posts: 20
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #15 on: October 28, 2017, 07:43:35 PM

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.

Sent from my SM-G930R4 using Tapatalk


us Offline LoopCutter

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,709
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #16 on: October 28, 2017, 09:27:57 PM
Very neat GAW

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.


Sent from my iPhone using Tapatalk
If I start and end the day above ground, it is a good day!

Hope yours is as good!

A SMART man always knows what to say!
   A WISE man knows whether or not to say it!!!
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Participate in a Challenge thread, carry a Victorinox Cadet and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Start a new thread with photos of at least 6 SAKs of different frame lengths and/or shapes in your collection. Eg 58mm, 74mm, 84mm regular, 84mm slim, 85mm etc Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread, carry a keychain tool with pliers, and post a photo every day for 30 consecutive days Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Participate in a Challenge and post a photo of a Utility Knife for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Leatherman Micra  for 30 days Participate in a Challenge thread and post a photo of  a Opinel  knife  for 30 days Participate in a challenge by carrying  a 100mm or 108mm SAK and post a photo of it  for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Vic Spirit MT for sixty (60) consecutive days.

us Offline Breezy12

  • No Life Club
  • ******
    • Posts: 2,026
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #17 on: October 28, 2017, 10:46:59 PM
Quote from: gerleatherberman on October 28, 2017, 02:50:34 PM
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
I know exactly what you mean! :cheers: I wear glasses too, and I really like having the mini bit driver on my tools. :tu:
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread demonstrating paracord knot tying Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must put something in order and provide link to the post. Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of a Japanese made PST in your collection

us Offline Breezy12

  • No Life Club
  • ******
    • Posts: 2,026
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #18 on: October 28, 2017, 10:54:26 PM
loving the responses so far, everyone! :D
Merit Badges Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread showing photos of your outdoor cooking Start a new thread demonstrating paracord knot tying Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must put something in order and provide link to the post. Must have a review written in the proper format and posted on the Main Site Start a new thread with photos of a Japanese made PST in your collection

us Offline Zhenchok

  • *
  • Sr. Member
  • ****
    • Posts: 418
BO "spare parts" Rebar.... as a giveaway!
Reply #19 on: October 29, 2017, 12:24:04 AM
Awesome GAW thank you

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086--Replacing my PSTII in EDC--this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.




Sent from my iPhone using Tapatalk
“All human beings have three lives: public, private, and secret.” ― Gabriel García Márquez

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #20 on: October 29, 2017, 02:01:50 AM
Quote from: Breezy12 on October 28, 2017, 10:46:59 PM
Quote from: gerleatherberman on October 28, 2017, 02:50:34 PM
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
I know exactly what you mean! :cheers: I wear glasses too, and I really like having the mini bit driver on my tools. :tu:
Lots of people dislike the mini driver, but when you can't see more than 2 feet in front of you without glasses, the micro driver is a game changer. :cheers:
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Must buy an item through the MTo Store Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

Offline vadsoom

  • Full Member
  • ***
    • Posts: 104
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #21 on: October 29, 2017, 02:37:21 AM
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!

us Offline LoopCutter

  • *
  • Zombie Apprentice
  • ********
    • Posts: 12,709
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #22 on: October 29, 2017, 06:00:27 PM
Quote from: gerleatherberman on October 29, 2017, 02:01:50 AM
Quote from: Breezy12 on October 28, 2017, 10:46:59 PM
Quote from: gerleatherberman on October 28, 2017, 02:50:34 PM
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
I know exactly what you mean! :cheers: I wear glasses too, and I really like having the mini bit driver on my tools. :tu:
Lots of people dislike the mini driver, but when you can't see more than 2 feet in front of you without glasses, the micro driver is a game changer. :cheers:
same for me, must have 2nd pair of glasses to repair the first, or somebody handy that can use my tool. 

Can fix someone else’s, no problem with that.


Sent from my iPhone using Tapatalk
If I start and end the day above ground, it is a good day!

Hope yours is as good!

A SMART man always knows what to say!
   A WISE man knows whether or not to say it!!!
Merit Badges Participate in a challenge by carrying  a Combo Edged knife or Multitool and post a photo of it  for thirty (30) consecutive days. Participate in a Challenge thread, carry a Victorinox Cadet and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with photos of a Japanese made PST in your collection Start a new thread or Post in a Challenge Thread and post a photo of a Spartan  for 30 days Start a new thread with photos of at least 6 SAKs of different frame lengths and/or shapes in your collection. Eg 58mm, 74mm, 84mm regular, 84mm slim, 85mm etc Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread, carry a keychain tool with pliers, and post a photo every day for 30 consecutive days Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Participate in a Challenge and post a photo of a Utility Knife for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Delemont SAK for thirty (30) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Leatherman Micra  for 30 days Participate in a Challenge thread and post a photo of  a Opinel  knife  for 30 days Participate in a challenge by carrying  a 100mm or 108mm SAK and post a photo of it  for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Vic Spirit MT for sixty (60) consecutive days.

ie Offline Don Pablo

  • *
  • Zombie Apprentice
  • ********
    • Posts: 15,329
  • Yoo-hoo, big summer blowout!
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #23 on: October 30, 2017, 09:38:23 AM
Added vadsoom and fixed cody's entry?

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.
Hooked, like everyone else. ;)

All hail the hook!
Merit Badges Start a new thread and post a photo of the pen for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days.

au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,970
  • Born to multitask.
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #24 on: October 30, 2017, 10:54:27 AM
Cool! Thanks for the chance!  :cheers:

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0367 - ReamerPunch - Everyday edc
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.
Merit Badges Participate in a Challenge thread and post a photo of a tool made in a specific country for thirty (30) consecutive days. Participate in the Challenge thread and post a photo of a Flashlight for thirty (30) consecutive days. Participate in a Challenge, carry a fire-starting item and post a picture daily  (in use if possible) for 30 days. Lighters, matches, ferro rods, fire pistons, Signal, candles, sparkers, tinder, stoves, bowdrill sets. Carry an orange item and post a picture of it everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Roxon tool for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. ? Create and post MTO-oriented and tool-based memes in the main meme thread. Participate in a Challenge thread, carry a modular tool, and post a photo every day for 30 consecutive days. Find him!

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #25 on: October 30, 2017, 11:19:46 AM
Awesome GAW, Breezy :o Love the toolset on that and thanks very much for the chance :tu:

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0367 - ReamerPunch - Everyday edc
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0656 - Poncho65 - I will throw that bad mama jama into my work EDC and carry it like a Boss 8) :rofl: No really I will :D
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year.

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,948
  • Oxygen and magnesium toghether?! OMg!
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #26 on: October 30, 2017, 01:41:08 PM
Quote from: Poncho65 on October 30, 2017, 11:19:46 AM
Awesome GAW, Breezy :o Love the toolset on that and thanks very much for the chance :tu:

Yup, pretty much what he said.
 :salute: :tu:

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0136 - pfrsantos - keep it in my toolbox (for work around the house) or in the car (for any emergency).
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0367 - ReamerPunch - Everyday edc
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0656 - Poncho65 - I will throw that bad mama jama into my work EDC and carry it like a Boss 8) :rofl: No really I will :D
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,948
  • Oxygen and magnesium toghether?! OMg!
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #27 on: October 30, 2017, 01:43:49 PM
Quote from: Breezy12 on October 28, 2017, 07:33:33 AM
In the spirit of thinning the herd and letting go of unused tools, I would like to host a modest giveaway. :D




________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


ca Offline Toolslinger

  • Thread Killer 2015
  • *
  • No Life Club
  • ******
    • Posts: 2,453
  • Ser Tool the Slinger, The Tool That Rides
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #28 on: October 31, 2017, 12:37:40 PM
Thanks for the GAW! :salute:

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0084 - Toolslinger - backup in my car console box
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0136 - pfrsantos - keep it in my toolbox (for work around the house) or in the car (for any emergency).
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0367 - ReamerPunch - Everyday edc
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0656 - Poncho65 - I will throw that bad mama jama into my work EDC and carry it like a Boss 8) :rofl: No really I will :D
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.

england Offline Kev D

  • Absolutely No Life Club
  • *******
    • Posts: 8,570
Re: BO "spare parts" Rebar.... as a giveaway!
Reply #29 on: October 31, 2017, 12:54:28 PM
Thanks for the GAW

0000 - Breezy12 - keep it stashed in my parts bin on my workbench for no apparent reason
0006 - Mechanickal - on belt during work
0010 - zrxoa1 - stash it in console of my truck
0014 - T14 - Store it my cargo ebike lockbox
0084 - Toolslinger - backup in my car console box
0086 - cody6268 - Replacing my PSTII in EDC, this mod would be a perfect sucessor to the PSTII.
0117 - karlito - I'll keep it in my work bag
0136 - pfrsantos - keep it in my toolbox (for work around the house) or in the car (for any emergency).
0205 - jaya_man - I’ll use it as parts to pimp out my Knifeless WaBar.
0240 - Top-Gear-24 - In my trouser pocket during work
0367 - ReamerPunch - Everyday edc
0472 - gerleatherberman - would love to have this for my camp bag. I wear glasses and the mini driver is a cool addition to the tool.
0543 - Zhenchok - I would keep this as a daily carry in my pocket, the tool looks awesome.
0624 - Kev Davey - I would keep it in my pocket as it would be added to my EDC rotation.
0656 - Poncho65 - I will throw that bad mama jama into my work EDC and carry it like a Boss 8) :rofl: No really I will :D
0747 - Dutch_Tooler - I don't even have a Rebar, let alone a BO one so even modded it would be a great alternate to my ST 300 VX. It might incur further mods...:angel:
0750 - lichan - I'll put it in my small everyday-carry sling bag.
0847 - an0nemus - I'll definitely put this in my EDC bag to replace my Charge TTi!
0848 - Film School EDC - Looking for some fodder to get a screwdriver on the outside of my Surge. A spare bit exchanger definitely wouldn't hurt.
0919 - vadsoom - I would give it to my niece’s husband as a new baby gift!
0963 - LoopCutter - Bike bag, replacing a Paratool, adding a bit kit.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Must buy an item through the MTo Store Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a thread with a photo of a repair you made with duct tape Start a thread with photos of at least 1 MTO branded tool in your collection Must start a thread with a photo of your EDC watch Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must put something in order and provide link to the post. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Start a new thread with photos of camping, including those showing preferred camping equipment Must start a thread with a photo of your stayglow SAK Start a new thread with a photo of your custom ALOX with scissors Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a picture of fire making kit or fire with a multitool Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa.

Pages: 1 2 3   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $21.00
PayPal Fees: $1.42
Net Balance: $19.58
Below Goal: $280.42
Site Currency: USD
 7%
May Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal