Anything to do with motorcycles, scooter, etc...
-
Thanks D_T I it’s a very handy tool to have
And I was lucky to get it for a very cheap price
-
Just got back from the wood supplier
And got one more slat of wood size 34x34mm x 2400mm
same size I have been using and one that is the size
of 63x34mm x 2400mm as I am going to use that
one for the two ends of the platform for extra strength
And I bought more screws as I have run out
-
Fitting the last couple of strengthening slats today
Apart from the one that is going to be near the wheel chock
As I have to wait until I got it so I can see where
I got to drill the holes to fasten the wheel chock
And how I am going to mount it to the platform


-
Then I still have to think about making a ramp for the platform
And what type of flooring I am going to use to cover the platform
And what colour I am going to paint the platform :ahhh -
:ahhh
Decisions, decisions

Meanwhile before and after pics of the tool kit on the Guzzi. I have added a few useful items. The filled pouch (minus the spark plug box, that goes into a small rear bag where I keep spare bulbs, a FAK and gloves) still just fits under the seat. Note to self: add some wire, paracord and tie wraps as well as a T40 bit and handle and what I think is a T60 bit.


-
Nice selection of tools for your bike D_T

I have the same for my bike under the rear seat
But I also have a small air compressor
and tyre puncture repair kit under the seat
-
Still busy working on the lift platform and now I am fitting
extra strengthening slats in between the ones I have already fitted
As I was lucky enough to move the arms on the lift out of the way




-
These are the strengthening slats I am working
on now to fit between the ones already fitted



-
Once I have finished with the strengthening slats
I am going to start working on the ramp that
I will use for getting the bike on top of the platform
-
Looking goos, Speedy!

-
Thanks Nix

-
@Wspeed said:
Nice selection of tools for your bike D_T
I have the same for my bike under the rear seat
But I also have a small air compressor
and tyre puncture repair kit under the seat
Thanks
Alas, no place for a tyre kit anymore, let alone a compressor. I shall have to trust German road cleaning schedules 
-
I have to say so far I have been lucky not to get a puncture :D
But you never know when it can happen but hopefully I will never need to use it -
Fitted all of the strengthening slats
Now it’s waiting for the wheel chock to get delivered
on Monday and then I can finish the lift platform

-
Then I am thinking of covering the platform with rubber flooring


-
Probably a good idea...

-
@Dutch_Tooler said:
:ahhhDecisions, decisions

Meanwhile before and after pics of the tool kit on the Guzzi. I have added a few useful items. The filled pouch (minus the spark plug box, that goes into a small rear bag where I keep spare bulbs, a FAK and gloves) still just fits under the seat. Note to self: add some wire, paracord and tie wraps as well as a T40 bit and handle and what I think is a T60 bit.
That is quite comprehensive.
I include some pics of my "lite" kit and the tire repair kit.
I will also add some self amalgamating tape, to your kit. I have used mine for many different uses, very useful on the bike
I will take pics next weekend of all my kits that I use. The larger one goes on the GSA where space is not a problem. A small tin with a few nuts and bolts and washers is also very useful. I store my cable ties in an old bicycle tubby (thin road tube) and tie them to the rear frame. If I need a tie I just pull one out.
Pete




-
Thanks Pete

Nice kits

Good tip with the tape and some nuts/bolts, takes little space to add this.

Interesting to see the evolution of type of fastener heads used on BMW - on my old one (2001) spanners and Allen keys were more useful than Torx bits. Guzzi seems to remain more traditional, with a couple of exceptions (T40, T60(?)).
I see you're packing a Crunch with bits for the R9T. I have considered replacing the pliers with a multitool such as my Roxon with bits, but the pliers are quite compact and the Roxon would take more space, plus 1/4" bits are of limited use on the Guzzi.
-
@Dutch_Tooler said:
Thanks PeteNice kits
I see you're packing a Crunch with bits for the R9T.
Cheers Mate,
I think a Crunch is a very useful motorcycle tool. With the locking pliers it can be used for quite a few unusual tasks like clamping cables if you broke a throttle or clutch. I always have another MT / pliers with me. The blue kit is specific for BMW with the added torx bits, that one goes on long trips.
It is easy to go overboard, especially if one has the space. Tools add weight quite quickly so I am careful in what I pack. I have not used much of my stuff that much, but others have and that have kept the group going with only minor time delays.
What I never skimp on is the First Aid Kit. That is always packed, and like insurance I hope I don't have to use it.
Cheers, Pete
-
Indeed, I always carry a First Aid Kit in the small bag at the rear. I've found some uses for a ratchet and some Allen bits so I may add these, they shouldn't take much space.
In other news I had a nice ride today that brought me to the city of Landsberg am Lech. See pic.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
