Anything to do with motorcycles, scooter, etc...
-
Mmh... I'd add 2 more on the other sides and interconnect them with the widthwise ones...
-
Most of the strengthening slats sit straight on the lift
apart from the 2 I am fitting to the end of the platform
They are going to be the only ones not supported by
the framework of the lift the main reason I fitted the slats
is to miss the Arms that are on the lift that you use to lift
a car up on I will try and take a pic of the lift without the
plywood platform on it so you can see what I am talking about
-
now I am fitting the strengthening slats for the width of the plywood platform
The only problem I have now is I have run out of screws
and I need one more slat of wood for the ends of the platform :ahhh

-
oh I see, both dimensions are covered 
-
Here is a pic of the lift I have
you can see the arms that I am on about
That’s why I am using the wooden
slats to place the plywood platform on
And using the lift to run the strengthening slats on

-
Nice piece of kit

-
Thanks D_T I it’s a very handy tool to have
And I was lucky to get it for a very cheap price
-
Just got back from the wood supplier
And got one more slat of wood size 34x34mm x 2400mm
same size I have been using and one that is the size
of 63x34mm x 2400mm as I am going to use that
one for the two ends of the platform for extra strength
And I bought more screws as I have run out
-
Fitting the last couple of strengthening slats today
Apart from the one that is going to be near the wheel chock
As I have to wait until I got it so I can see where
I got to drill the holes to fasten the wheel chock
And how I am going to mount it to the platform


-
Then I still have to think about making a ramp for the platform
And what type of flooring I am going to use to cover the platform
And what colour I am going to paint the platform :ahhh -
:ahhh
Decisions, decisions

Meanwhile before and after pics of the tool kit on the Guzzi. I have added a few useful items. The filled pouch (minus the spark plug box, that goes into a small rear bag where I keep spare bulbs, a FAK and gloves) still just fits under the seat. Note to self: add some wire, paracord and tie wraps as well as a T40 bit and handle and what I think is a T60 bit.


-
Nice selection of tools for your bike D_T

I have the same for my bike under the rear seat
But I also have a small air compressor
and tyre puncture repair kit under the seat
-
Still busy working on the lift platform and now I am fitting
extra strengthening slats in between the ones I have already fitted
As I was lucky enough to move the arms on the lift out of the way




-
These are the strengthening slats I am working
on now to fit between the ones already fitted



-
Once I have finished with the strengthening slats
I am going to start working on the ramp that
I will use for getting the bike on top of the platform
-
Looking goos, Speedy!

-
Thanks Nix

-
@Wspeed said:
Nice selection of tools for your bike D_T
I have the same for my bike under the rear seat
But I also have a small air compressor
and tyre puncture repair kit under the seat
Thanks
Alas, no place for a tyre kit anymore, let alone a compressor. I shall have to trust German road cleaning schedules 
-
I have to say so far I have been lucky not to get a puncture :D
But you never know when it can happen but hopefully I will never need to use it -
Fitted all of the strengthening slats
Now it’s waiting for the wheel chock to get delivered
on Monday and then I can finish the lift platform

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
