The Nessmuk Challenge
-
@ReamerPunch said:

https://www.youtube.com/watch?v=TVPKX3qFRDcNice clip, after all these postings, I am thinking about getting one. But I am hoping to find one that's easy to clean and maintain, even for mostly home cooking.
-
@comis said:
Talk about Baby proof, do you hide all your sharps from plain sight and even locked them up? As the little gaining more mobility day by day, I felt my days of having all kind of toys on my table is limited...Oh yeah, I had to lock in my hobbyroom
No knives in the rest of the apartment, I think it's around 100 knives, SAK's and MT's in the hobbyroom now 
Sent fra min FRD-L09 via Tapatalk
-
Nix, I really enjoy your hikes!

-
@RF52 said:
Oh yeah, I had to lock in my hobbyroom
No knives in the rest of the apartment, I think it's around 100 knives, SAK's and MT's in the hobbyroom now 
Sent fra min FRD-L09 via Tapatalk
Oh, you mean "Man-cave"!? What a lovely concept!

@RF52 said:
Looks like a gorgeous area for a walk
Sent fra min FRD-L09 via Tapatalk

I hope to get out for a stroll today.
Have fun!

-
Thinking about how easy it would be to add a saw blade to your kit i decided to have a go at making a simple frame saw using just my 3 tools, the blade weighs nothing and could easily be carried rolled up inside a tin or something or as comis's video shows wrapped round your waist in the loops, on site it's easy enough to make the saw parts provided you find decent wood to work with, i'm good for that so i went with Hazel, there are a million ways to make this type of saw but i went with the basic rustic style, i could also have just used one piece of wood bent over like a bow saw, the tension would have held the blade fine, i will try that way the next time.
All parts needed, cut with axe and the fixie as a sort of drill to make the holes for the crossbar and to make the slits needed for the blade, folder was pressed into service for the cord grooves and the small pegs to hold the blade on

And put together, it works


One of my uprights was a bit gnarly so i would use a nice straight piece next time, the holes and pointed crossbar was the thing that took the time here, they have to be right, i took it apart a few times to fettle it but got there in the end, took me about half an hour all in but i wasn't in a rush, with experience you could probably get that down to 10 mins or so, less if you were allowed to use the saw :D
Another thought i had was if i was moving camp i would leave the wood behind and make new ones on the new site, i would carry the blade, the cord and probably the two small pegs holding the blade on as they took a while to make, the rest i would burn and heat my coffee on the fire
that is of course if i was sure the new site had trees...
Edited to add, Day 21 -
Great work on the saw Borg. Did you try it out after you put it together?
Comis, Cast Iron cookware is not recommended for some types of stove tops such as the seamless ceramic cooktops. It may damage them from the weight. However, using them is easy on a grill, over a fire, or even in the oven. The cast iron is easy enough to care for. You never put it on the fire empty it has to at least have some cooking oil in it. When you clean it you can use soap and water but it must then be completely dried or it will rust, and when it is dry you should put it back on the heat and coat it, inside and out, with cooking oil while it is warm before you put it away. The coating of oil on the outside just prevents rust, but the coat of oil on the inside is seasoning it and helping it to become a non-stick surface when you cook in it. -
@Borg said:
Thinking about how easy it would be to add a saw blade to your kit i decided to have a go at making a simple frame saw using just my 3 tools, the blade weighs nothing and could easily be carried rolled up inside a tin or something or as comis's video shows wrapped round your waist in the loops, on site it's easy enough to make the saw parts provided you find decent wood to work with, i'm good for that so i went with Hazel, there are a million ways to make this type of saw but i went with the basic rustic style, i could also have just used one piece of wood bent over like a bow saw, the tension would have held the blade fine, i will try that way the next time.All parts needed, cut with axe and the fixie as a sort of drill to make the holes for the crossbar and to make the slits needed for the blade, folder was pressed into service for the cord grooves and the small pegs to hold the blade on

And put together, it works


One of my uprights was a bit gnarly so i would use a nice straight piece next time, the holes and pointed crossbar was the thing that took the time here, they have to be right, i took it apart a few times to fettle it but got there in the end, took me about half an hour all in but i wasn't in a rush, with experience you could probably get that down to 10 mins or so, less if you were allowed to use the saw :D
Another thought i had was if i was moving camp i would leave the wood behind and make new ones on the new site, i would carry the blade, the cord and probably the two small pegs holding the blade on as they took a while to make, the rest i would burn and heat my coffee on the fire
that is of course if i was sure the new site had trees...
Edited to add, Day 21Nicely done
I'm gonna try one myself someday 
Sent fra min FRD-L09 via Tapatalk
-
@Alan K. said:
Great work on the saw Borg. Did you try it out after you put it together?
Comis, Cast Iron cookware is not recommended for some types of stove tops such as the seamless ceramic cooktops. It may damage them from the weight. However, using them is easy on a grill, over a fire, or even in the oven. The cast iron is easy enough to care for. You never put it on the fire empty it has to at least have some cooking oil in it. When you clean it you can use soap and water but it must then be completely dried or it will rust, and when it is dry you should put it back on the heat and coat it, inside and out, with cooking oil while it is warm before you put it away. The coating of oil on the outside just prevents rust, but the coat of oil on the inside is seasoning it and helping it to become a non-stick surface when you cook in it.
What Alan said.
If you are not going to use your Dutch Oven on the fire or coals, you might consider trying an enameled cast iron Dutch Oven. Even easier to care for, and they don't mind having acidic foods simmer away for hours.
Just be sure it can go in the oven! Some models have plastic handles that will melt in the oven. Wha...?

I keep looking at one of Lodge's enameled cast iron pots:

-
Day 21:
Mrs Nix wanted to get a little nature time today. I packed a small rucksack and we headed out to a local park with Adventure Boy.
After a nice walk by the lake....

We settled down for a breakfast of Builder's Tea and homemade granola bars:

There had been two granola bars present right before I took the snap.......

Lovely views, and we saw a number of birds--Blue birds, Goldfinches, Swallows, Magpies, and Grouse. You can see on the rock in this shot a small with speck, that's a Sea Gull!

Adventure Boy loved the outing, but was a little annoyed by some restrictions.....

Still, we were all glad to get out for a leisurely walk and lakeside breakfast!


Say.....that looks like an area to go camping.......hmmmmm....
-
Excellent project, Borg! It looks fantastic!

I don't have any blades like that, but once I do I'll make one of those too.
-
There are a number of parks around here with miles of nature trails or I could just go west about 20 miles and I'd be in the Everglades. Unfortunately, this is the view outside my back door a 3 o'clock in the afternoon and it's been like this for the last week. Nothing but dark skies and intermittent torrential rains. If this doesn't clear up soon I may start constructing an ark. I bet ya I'll be sorry then that I picked a machete instead of an axe for this challenge. Happy to have the Vic Spirit though.
-
Mrs Nix wanted to get a little nature time today. I packed a small rucksack and we headed out to a local park with Adventure Boy.
After a nice walk by the lake....

We settled down for a breakfast of Builder's Tea and homemade granola bars:

There had been two granola bars present right before I took the snap.......

Lovely views, and we saw a number of birds--Blue birds, Goldfinches, Swallows, Magpies, and Grouse. You can see on the rock in this shot a small with speck, that's a Sea Gull!

Adventure Boy loved the outing, but was a little annoyed by some restrictions.....

Still, we were all glad to get out for a leisurely walk and lakeside breakfast!


Say.....that looks like an area to go camping.......hmmmmm....
Lovely day Nix! And it looks like the weather was great as well

Sent fra min FRD-L09 via Tapatalk
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



