The Nessmuk Challenge
-
Day 25

JG5 attended mail duty.
Alan, here's a comparison of short fixed blades I have, and the Lou Humphrey and Erapuu are new.

From top to down:
Modded Mora with shorten blade
ESEE JG5
Becker BK24 (like this, but the handle is 1/2-1" too short)
TM Hunt Skelemagua(awesome grip, and very useful knife)
Mora Junior
Erapuu Taskupuukko
Lou Humphrey Tarpon
New Humphrey I got, really like the ergo, fit and finish is quite decent, 95% on par with Bark River.

Erapuu is also new, I love the idea of slim, small fixed blade good for pocket carry. The sheath/cap with lanyard attachment reminds me of Japanese design.
This is Mora Junior. One of the most overlooked knife, since people think it's for kids. But the ~4in handle still offers pretty good grip if you want to hammer fist it, and I like the little guard on it, so I could easily draw it in and out without paying much attention. -
Day 16:
Tis the Nessmuk so SwissChamp doing work that would’ve otherwise fallen to the Beretta Hammer multitool (needed for some gentle nailing):

Sent from my iPhone using Tapatalk
-
I remember once i was having lunch in the woods in the middle of nowhere, this mouse appeared, went into my bag and made off with a Kit-Kat, took him 5 seconds, was funny to watch him drag it away, i think they know what's in your bag
That's wild! Lucky he didn't snatch the wallet while he was it, that'd totally freak me out. :ahhh :D
@Nix said:
I sometimes carry a pistol with me in the woods because of the bears and wolves. Maybe for lion, too. I used to think lions were really skittish, but I've heard enough stories of aggressive lions that some sort of defensive measure seems prudent. Although, I've only glimpsed one once! (Mrs Nix saw a lion in our backyard a few years ago... :o )This time I felt I was carrying enough stuff and figured the pepper spray would be 'good enough'. When I saw that bear....especially when it didn't run away from the sound of my voice...a little voice in my head said, "maybe you should have brought that pistol after all....."
Maybe. But maybe we don't need to worry as much as our imaginations lead us to do sometimes.

I am sure you definitely know that (IIRC) statically, spray does work better than gun(afterall it covers widler area) and probably a better choice especially around other people. But if I were you, encountering a bear alone in close quarter, I bet I too would have second guess the choice as well.

Agree with the rodent or any four legged critters, one thing I sure don't want when camping is a whole herd of them trying to chew thru the tent to get to my goodies at night. That's why hanging or storing food off site is so important.
@ReamerPunch said:
Day 25A second attempt at the bowdrill.
I tried to fix my many mistakes.
The bearing block is now a Y branch. I carved off the knots and edges that would be in my palm, and it is unbelievably comfortable. The hole has been driven in the approximate middle, and the forked end makes it very stable in my hand.
The spindle has been carved to fit the bearing block perfectly. It is locked in there.
The spindle has also been carved to a blunt point, like a glass breaker, to stay in the hearth board divot. And it does.With the set ready, I gave the spindle a few spins in the hearth board to make it seat nicely. Then, I carved off the burned end of the spindle, to get a fresh surface, and I cut the notch for the ember. I also carved a little off the bottom of the notch, to allow for some airflow and had something under the notch to catch the ember, and I had my bird's nest ready.
I got some smoke, but it was mainly from the bearing block. It was too much of a perfect fit, and had way too much friction. Back to the drawing board.



Looking great! You probably know this--I have seen people installing a large bearing into their knife handle to make the spindle spin easier, maybe that could be of help?

-
@comis said:
Looking great! You probably know this--I have seen people installing a large bearing into their knife handle to make the spindle spin easier, maybe that could be of help?
I've seen that mod before. I have a fidget spinner somewhere.

I'll try something with my bearing block first.
I won't modify my Mora. Why turn that into a bearing block? It already has a ferro rod on it.
-
@comis said:
Alan, here's a comparison of short fixed blades I have, and the Lou Humphrey and Erapuu are new....
Erapuu is also new, I love the idea of slim, small fixed blade good for pocket carry. The sheath/cap with lanyard attachment reminds me of Japanese design.
....
Nice collection!

I really like that Erapuu! Great design and concept. It would be interesting to do a Fixed-blade challenge with that one! (Send it over and I'll save you the trouble of having to do the challenge yourself...... :D)
-
@comis said:

This is Mora Junior. One of the most overlooked knife, since people think it's for kids. But the ~4in handle still offers pretty good grip if you want to hammer fist it, and I like the little guard on it, so I could easily draw it in and out without paying much attention.I have an older version from KJ Eriksson, which has a pointed blade, double guard, and a Boy Scout on the leather with metal tip reinforcement sheath. Laminated steel too. It has green plastic handles that are apparently so old, it's a type that shrinks with age (guessing 1950s?). It's just big enough (unlike a lot of neck-type knives with wide, but poorly shaped and too thick of a spine for 2" and under blades) without being too big. And, small enough that in its sheath, it will still fit in a pocket. I am getting it rehandled, and a new retention strap put on the sheath.
I like how that one just has a single guard.
-
@ReamerPunch said:
I got some smoke, but it was mainly from the bearing block. It was too much of a perfect fit, and had way too much friction. Back to the drawing board.
I put a little oil or grease (a smear of Chapstick, once) on the spindle (bearing block end) to reduce friction there. Not sure how much of a difference that actually makes. But it makes sense to me....

I think you are right, though: you don't need a lot of friction at the bearing block.
-
Nice selection of smaller knives Comis. I hope you like the Humphrey because it does look very comfortable.
What about a reverse bow drill? If you develop a coal in the bearing block instead of in the hearth board you have still successfully made a coal, and that is the point of the exercise isn't it? -
@ReamerPunch said:
I've seen that mod before. I have a fidget spinner somewhere.
I'll try something with my bearing block first.
I won't modify my Mora. Why turn that into a bearing block? It already has a ferro rod on it.
:D That's true! I personally don't mind a smooth metal divot in a plastic mora handle, bearing does look kinda weird.
I really like that Erapuu! Great design and concept. It would be interesting to do a Fixed-blade challenge with that one! (Send it over and I'll save you the trouble of having to do the challenge yourself...... :D )
Wait...am I smelling a Fixie Challenge happening sometime next year?
:D@cody6268 said:
I have an older version from KJ Eriksson, which has a pointed blade, double guard, and a Boy Scout on the leather with metal tip reinforcement sheath. Laminated steel too. It has green plastic handles that are apparently so old, it's a type that shrinks with age (guessing 1950s?). It's just big enough (unlike a lot of neck-type knives with wide, but poorly shaped and too thick of a spine for 2" and under blades) without being too big. And, small enough that in its sheath, it will still fit in a pocket. I am getting it rehandled, and a new retention strap put on the sheath.I like how that one just has a single guard.
Mora also is making the exact same knife you'd mention, I think they called it a boy scout knife. That's a pretty good suggestion!


-
**Day 25:
**Getting the weekend started right.....

-
@Nix said:
I put a little oil or grease (a smear of Chapstick, once) on the spindle (bearing block end) to reduce friction there. Not sure how much of a difference that actually makes. But it makes sense to me....
I think you are right, though: you don't need a lot of friction at the bearing block.
Great trick!
@Alan K. said:
Nice selection of smaller knives Comis. I hope you like the Humphrey because it does look very comfortable.
What about a reverse bow drill? If you develop a coal in the bearing block instead of in the hearth board you have still successfully made a coal, and that is the point of the exercise isn't it?I do like it, the curved down handle really does give a lot of tactile feedback to the pinky when cutting, and that's really awesome.
Following your idea, I end up searching for different methods of friction fire, and found a new technique that I don't think I have tried in the past:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Of course, one may argue how likely we are going to find two perfectly flat wood to do this, but interesting concept none the less.
-
@Alan K. said:
What about a reverse bow drill? If you develop a coal in the bearing block instead of in the hearth board you have still successfully made a coal, and that is the point of the exercise isn't it?I honestly considered using the bearing block as a hearth and the hearth as a bearing block.
I've got an idea that should work. We shall see. -

JG5 attended mail duty.
Alan, here's a comparison of short fixed blades I have, and the Lou Humphrey and Erapuu are new.

From top to down:
Modded Mora with shorten blade
ESEE JG5
Becker BK24 (like this, but the handle is 1/2-1" too short)
TM Hunt Skelemagua(awesome grip, and very useful knife)
Mora Junior
Erapuu Taskupuukko
Lou Humphrey Tarpon
New Humphrey I got, really like the ergo, fit and finish is quite decent, 95% on par with Bark River.

Erapuu is also new, I love the idea of slim, small fixed blade good for pocket carry. The sheath/cap with lanyard attachment reminds me of Japanese design.
This is Mora Junior. One of the most overlooked knife, since people think it's for kids. But the ~4in handle still offers pretty good grip if you want to hammer fist it, and I like the little guard on it, so I could easily draw it in and out without paying much attention.Very nice selection comis

Sent fra min FRD-L09 via Tapatalk
-

Day 25

-
Lovely knife!

-
Day 25
Poor Moose on package duty today. Moose is dreaming of the wilderness.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


