The Nessmuk Challenge
-
Day 28 (part 2, and still a day late…):
With the fire going, it was time to consider dinner.
I had brought along a Montana beef Ribeye steak. No problem there. There is always a way to cook a steak. But I had also planned to make a cornbread. (This would be the American version of the Australian ‘Damper’.)
The wind might still prove to be a problem. I rigged up a tripod from a few old pieces of rebar (stuck in the truck for just such a purpose) and set the Dutch oven to pre-heating over the flames…..

Also pictured: folding shovel and folding fry pan (on a trivet). Some sort of shovel is crucial when Dutch oven cooking.
I say that like I know what I’m doing…which I don’t…but I’ll still insist that a shovel is useful when using raw fire and a Dutch oven.
The folding fry pan is useful for awl sorts of things; in this case, to melt butter for corn bread…..

Jalapeño cornbread!

This is a simple cornbread recipe that it made up before heading out.
Recipe:
Spoiler:
1 cup corn meal
1/2 cup AP flour
1 tsp baking powder
1 tsp sugar
1/2 tsp baking soda
1/2 tsp salt
1/2 tsp cinnamon
1/2 tsp cayenne pepper
1/2 tsp cinnamon
2 eggs, beaten
1 cup Buttermilk (more or less)
5 tablespoons melted butterIt does require an egg or two plus some liquid (Buttermilk in this case) and some melted butter (or bacon grease if you have it!), but tat's why you have a Chuck Wagon. Right?
And some chopped Jalapeños……

I think we know how this turns out…….
yeah…

So, that’s the cornbread batter sorted out, but I was sure the wind would play havoc with the actual cooking.
After putting the cornbread into the Dutch oven, I added some coals to the lid (using the shovel). But the wind was making temperature control nearly impossible. Coals on one side were glowing bright, on the other, dull.
I figured it would be burnt on the bottom, and cooked unevenly on the top. No matter how often I rotated the lid and bottom…..

Surprise!
No, really, a huge surprise. I was hoping for something that was, in parts, edible. This is what I got:

That right there is some camping magic. I take no credit. The mountains were smiling.
But, Nix, surely you can’t just live off cornbread….?
True. But you can live off Jalapeño cornbread for a very long time.
Still…..would a steak be nice, too?
Yes!

I brought along a Montana ribeye (and now you know why it is called the “Chuck Wagon”.)
This got seasoned with my Cajun rub and some salt.
The fire had died down while cooking the cornbread. Which was a good thing. ‘Cuz pine coals do not make a good base for cooking beef.
So I added some charcoal briquets. (Yes, the Chuck Wagon arrives equipped and ready to serve.)

I used a small backpacking grill, perched on a trivet, to cook said steak on the coals…..

This little grill has proven to be remarkably useful.

My mouth is staring to drool just looking at these photos……

So…done to medium-rare to medium….the steak and cornbread finally got served.

This was way too much food. But…yes…I ate it awl. #don’twaste
(One of the best steaks I've had awl year....make that 'this decade'.
) -
Day 28 (part 3, and later by the minute…):
A few final shots…
Sunset came early.

But there was still time to boil the Billy and relax over a decaf coffee….. Only I used full caffeine instant instead of decaf…..


Ah, well…. It had been a good day and sleep was sure to come.
The dishes got cleaned….maybe not to John Gould’s standards…..

And the moon came up:

I crawled into the camper and listened to coyotes yip and screech, while elk bugled in the far distance.
Awl three of the trio had been used and it had been a good day. I had intended to read a bit, but just lay there watching stars appear….and fell asleep, just as the coyotes got busy…..
-
Another great adventure. Like the chuck wagon. Steak and cornbread in the wild.

-
Theres something to be said about charred cloth. Its fun to make and handy as heck.
@Alan K. said:
I like the Fresnel fire starter as well. I don't think I've seen one like that before.
@ReamerPunch said:
I'll carve them down to the sparker, then reinstall the spring, ferro rod, and wheel, like this:

Big Bics can be carved down to the bare essentials.

Wow, handy! I don't think I have seen it made so well, practically like the copper one I got. That in itself another great project! :o

-
Day 29 (part 1 and only):
I woke up to see Orion looming large overhead.
So I dug into my blankets and tried to go back to sleep.
But the coyotes started up again……
I waited until the sun started to rise before committing to going out into that cold mountain air.

I found a nice tall stump and got “Old Faithful”, my 35 year-old Coleman stove fired up…..

Yeah….that’s burning a bit funny. But the point is that Old Faithful always fires up. He may be old, he may be heavy, he may be clunky….but he fires up. Every time.
So, after a few minutes, he settles in to a steady burn:

While the coffee water is heating up in the Billy, the Vic FX gets called into service for bacon duty.

In the pan, resting on Old Faithful (for the gratuitous Spork shot):

Once the bacon pieces are crisped, in go the eggs, ‘cuz Grandma don’t waste bacon grease:

Along with a piece of yesterday’s cornbread…..a breakfast fit for a lumberjack.

(Yeah…I ate at least twice as much as I normally do in two or three days…..
)On the way home, a backward glance:

-
@Nix said:
Day 28 (part 3, and later by the minute…):A few final shots…
Sunset came early.

But there was still time to boil the Billy and relax over a decaf coffee….. Only I used full caffeine instant instead of decaf…..


Ah, well…. It had been a good day and sleep was sure to come.
The dishes got cleaned….maybe not to John Gould’s standards…..

And the moon came up:

I crawled into the camper and listened to coyotes yip and screech, while elk bugled in the far distance.
Awl three of the trio had been used and it had been a good day. I had intended to read a bit, but just lay there watching stars appear….and fell asleep, just as the coyotes got busy…..
Nix! You outdid yourself again! When you say camping, I am thinking more in line like this:

But what you did is called "glamping"
:D
-
I took up 'glamping' so that Mrs Nix would go along. :ahhh
And....sometimes...she does....

-
And the coffee, steak, eggs, cornbread and BACON! I am beyond words!
Now I know why of all these people, Bilbo will let Samwise go on the field trip:

-
Day 30 more stuff
Bowdrill Fire
Fourth attempt Part 2
I sawed the notch on the hearth board, and removed some material from the underside, and also removed the burned surface of the spindle.
Everything seems ready. The wire U is a stand I made for the phone.


I started slow. I got tons of dust, but the notch was too narrow and the divot too shallow, so the dust accumulated mostly on the hearth instead of in the notch. I will have to widen the notch a little. The divot is now deeper already. I got smoke, so I started going faster and faster, until I got tons of smoke. I decided to stop and thankfully I had an ember. It would have been even better if the whole thing was in the notch. I transferred it in the bird's nest, and got tons of smoke, but no real flame to speak of. My bird's nest was too small. It should have been at least five times bigger. Still, I got the tiny ember to turn the bird's nest into a massive ember. The wind was not helping either. It blew the smoke in my face, and in the end it blew away what was left of my smoldering bird's nest.
Still, this is a huge step for me.


-
Happy is the Hobbit..... :D
-
@ReamerPunch said:
Day 30 more stuffBowdrill Fire
Fourth attempt Part 2
I sawed the notch on the hearth board, and removed some material from the underside, and also removed the burned surface of the spindle.
Everything seems ready. The wire U is a stand I made for the phone.


I started slow. I got tons of dust, but the notch was too narrow and the divot too shallow, so the dust accumulated mostly on the hearth instead of in the notch. I will have to widen the notch a little. The divot is now deeper already. I got smoke, so I started going faster and faster, until I got tons of smoke. I decided to stop and thankfully I had an ember. It would have been even better if the whole thing was in the notch. I transferred it in the bird's nest, and got tons of smoke, but no real flame to speak of. My bird's nest was too small. It should have been at least five times bigger. Still, I got the tiny ember to turn the bird's nest into a massive ember. The wind was not helping either. It blew the smoke in my face, and in the end it blew away what was left of my smoldering bird's nest.
Still, this is a huge step for me.


Fantastic job! You did it!

-
Another boring video.

https://www.youtube.com/watch?v=R_TX2ilpA9c -
-
-The bearing block is perfect. No friction, and very comfortable to hold and control. It allowed for excellent friction between spindle and hearth board. This was the biggest issue I had.
-The bow is fine. It is the length of my arm, so I got nice, long push and pull strokes.
-The cord did not slip. I have to tighten it every now and then, but it is fine.
-The spindle is fine. I did not bother scoring along the length of it. The cord grabs on the spindle and is able to spin it, so no issues there.
-The hearth board is miles better than the fatwood one I had. I got tons more dust, and finally an ember. So all that remains is to make the notch a little wider, so that the dust can actually collect in the notch, to make for a hotter, bigger ember.
-The ember catch is a little small, but that is the easiest part to make.
-The bird's nest was too small. It got lots of smoke, and smoldered nicely, and became a massive ember, but still no flame. I noticed that the ember was fiddly. Once I dropped it in the bird's nest, I blew, and the smoke disappeared. I left it to smoke on its own for a little, and then I blew, and got lots of smoke. No doubt, had my bird's nest been bigger, I would have gotten a flame.Thanks to the frictionless bearing block and dry hearth board, I can now get an ember without much fatigue. I'll make the notch a little wider, have a larger bird's nest, do it on a less windy day, and have a bucket of water nearby, to put out the flame I will hopefully get.
-
So, a few more tips, now that I managed to get an ember:
-Have a good bearing block that has little to no friction.
-Have a hearth board that is dry. Not one with fatwood like I had.
-If your bowdrill set is decent, it will not take too much effort to get an ember.
-Start slow. Going hard from the start will tire you out. The spindle and hearth have to warm up first. Keep a steady stance, and you will get smoke despite going slower than you think you should be going. Once you see smoke, go a little faster, to get even more smoke and dust. Once you start getting more smoke than you thought you could get, go faster, and push harder. You'll get tons of dust that will hopefully fill the notch, and going faster and harder will ignite it.
-Knowing when to stop is not easy. Once you get lots of smoke, and lots of dust, either in the notch or on the hearth board like I did, go as fast as you can with the bow, to hopefully ignite the dust before fatigue makes you stop.
-Have a bird's nest the size of your head. And process it down by rubbing it against itself until it is soft and fibrous.Most importantly:
Do not let failure discourage you. You will make mistakes, you will fail at first, and you will feel like smurf. Examine the pieces of your set one by one, and find what is holding you back.
-I had too much friction between bearing block and spindle. I eliminated this by making a tiny bowl out of a coin. Bam! Frictionless.
-I had too little friction between spindle and hearth board. I eliminated this by replacing the fatwood board with a dry board. The new bearing block helped immensely as well.
-My divot was too shallow, and my notch was too narrow, but I still managed to get an ember on the hearth, and those are small problems that are easy to solve.
-My bird's nest was too small. Not a big deal. I'll make a bigger one next time. -
@ReamerPunch said:
-The hearth board is miles better than the fatwood one I had. I got tons more dust, and finally an ember. So all that remains is to make the notch a little wider, so that the dust can actually collect in the notch, to make for a hotter, bigger ember.Yeah: both wood type and design have a big impact, I've found.
@ReamerPunch said:
-The bird's nest was too small. It got lots of smoke, and smoldered nicely, and became a massive ember, but still no flame. I noticed that the ember was fiddly. Once I dropped it in the bird's nest, I blew, and the smoke disappeared. I left it to smoke on its own for a little, and then I blew, and got lots of smoke. No doubt, had my bird's nest been bigger, I would have gotten a flame.Why I made a huge 'bird's nest' for my flint and steel fire!

-
Fire with bow and drill has been the most frustrating technique I've tried.
Congrats for sticking with it.

Great advice you've set out, too. Persistence being the most crucial element, me thinks.....

-
I am so happy I got an ember.

I'll try to make a better bird's nest for next time. I would have gotten a flame if I used cotton, but I wanted a proper bird's nest. I used palm tree bark. It was not fibrous enough, and not enough of it.But the bearing block is really great with the coin.
I'll remove the bark, because it looks terrible. -
At the end of the day, it's all about that first, precious flame.....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

