One Eleven 'n One Twenty-one
-
I had to change some furnace and electric heat/air system filters and knew I had to do some prying to get to the filters, so I chose the GAK I got from Barry earlier this year.
Also, had need for some scissors, so I got the Outrider, my only 111mm with scissors. These Bosch branded examples were a part of a group buy done here back in April of 2019. Even with shipping from Germany, still ended up being about $15 cheaper than what an Outrider here is in the States.
Nice pics cody!

-
I had to change some furnace and electric heat/air system filters and knew I had to do some prying to get to the filters, so I chose the GAK I got from Barry earlier this year. That was used for some small cutting jobs, as well as the cap lifter for prying open the tabs that hold the intake (that holds the air filter) for the electric heat off.
<a href="https://flic.kr/p/2ko4bfb" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789053846_f625a38a86_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2A by cody6268, on Flickr
Also, had need for some scissors, so I got the Outrider, my only 111mm with scissors. These Bosch branded examples were a part of a group buy done here back in April of 2019. Even with shipping from Germany, still ended up being about $15 cheaper than what an Outrider here is in the States.
<a href="https://flic.kr/p/2ko4CvU" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50789142222_e9235caf49_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2B by cody6268, on Flickr
Just me, or are the GAK liners thicker? Or am I just looking at it odd? And, yep, I gotta straighten out those liners!
<a href="https://flic.kr/p/2knZcpR" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50788277323_9378f6a096_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 2C by cody6268, on Flickr
The "Bosch" Outriders are weird. You can still get them, they are still a few Euros cheaper than stock Outriders and I wonder what the heck this is all about? Did Bosch make a terrible judgement call a few years back and they are still trying to cut their losses? Or is there a regular "Bosch Outrider" line of SAKs where you simply save a few bucks if you are willing to advertise a well-known German tools manufacturer? I would really like to know. In any event, I opted for the "Bosch Outrider" a few weeks back in order to save a few bucks.
-
@Simon_Templar said:
Is that the version for the French navy?
Wait, I think that’s a joke!?! I’d just never seen the navy camp in real life and just thought I’d spice it up a bit.
I’m with echotech, I love the looks of that garant! I’ve been thiiiis close to pulling the trigger on one, but unusually for me managed to exes some restraint
-
Day 2

-
- Nix
- Cody6268
- munsonhsr
- Alan K.
- SurgeUK
- Tet
- Comis
- Rizio Il Ghiro
- Ulzhan
- Barry Rowland
- Storm
- Sos24
- Old Lefty
- Alexanderre
- Echotech
- ReamerPunch
- Simon_Templar
- Fast Bill
- VICMAN
- Ron Who
- BobbyRsa (late start)
- Borg
- FoBo
- zrxoa1
- ElevenBlade
-
Day 1
Coming in just under the wire here....
I've been wanting to do a 111mm challenge for a while now, so here's my chance. This isn't an ideal month for me, but what's a challenge without a challenge?
I'm still going between work and home, and nowhere else... And with all the challenges in the last year, I've tightened every screw in sight. I don't have any outdoor trips like hiking or camping planned, so there may be quite a few glamor shots, I'm afraid.
This might be the first Challenge where I go with more than one qualifying MT.... So stay tuned!
I'll start with a One Handed Trekker. I may switch to a OH Nomad at some point, just for fun. And if I get really adventurous... I might buy the Adventurer that I've had my eye on for some time now.
Let's roll!

-
Sorry for the late start, been a bit busy over new years , hope you've all had a great Christmas and New Years day .
Day 1
Used the blade to liberate some mince for spaghetti Bolognese for dinner
-
Day 2 (catchup post)
Chopped the overgrown leaves off this cabbage for the fridge , it will be okonomiyaki for lunch tomorrow

-
@zrxoa1 said:
I didn’t sign up for this challenge because I already have the Badge, but I thought maybe I’d try to join in. Am I allowed? If not, it’s cool. I’ll just watch from the sideline! Haha!!Just in case...
Day 1:
First off, here’s a group shot of my 111’s.
Left side, top to bottom:
Locksmith with Meton Boss titanium scales
US Soldier
GAK
DAKRight side, top to bottom:
Hercules with Nite Ize pocket clip
Garant
Garant
Centurion with modded Sentinel scales with pocket clipIn the middle is my Sentinel with the red scales from my Locksmith.

For today’s use, my Hercules!


Sent from my iPhone using Tapatalk
Day 1: Bonus
Even though it’s technically 1-2-21, I am still awake so I just consider this an extension of the 1st...
Used my Sentinel to cut up some white cheddar. I modded the original scales for use on my Centurion. Since I had extra scales from my mod to my Locksmith, I slapped those on the OH Sentinel! [emoji1303]

Sent from my iPhone using Tapatalk
-
Now that's a Real Cheese Master

-
Day 02
The new Eggbuster!

-
Nice work and pics, everyone!
Day 2
DPD delivery first thing (thankfully I’d just got back from getting the paper!) - I used the awl on my Soldier 2019 to cut through all the sticky tape to free a new rucksack got at a tempting discount - a Fjallraven Singi Stubben which doubles as a seat (it has a frame inside it) when out on hikes - I hope to use it on birding expeditions in the spring, but it’ll obviously get tested out before then on walks with hot meal breaks later this month as there’s plenty of room for a jetboil, water and dehydrated pack of some flavour. They do make side pockets for it, but they’re out of stock at the moment, but at least one will be ideal for a flask of some kind!

-
Day 2
This morning I wanted to replace the battery of my bicycle´s tail light. But my Hunter XT has no Phillips and no opener layer, so I used my Champion instead. To most of you this might be a serious drawback, but I don´t mind; it´s not often that I need a screwdriver. Anyhow, zero points for the Hunter XT.

-
<u>Day 2</u>

111 help cuts the ginger tea package for Mrs, brown nose point is important.
Also used the Trekker's blade to trim the end of the cuttings of Thai Basil, and will try to propagate in water bottle and see whether the roots would grow. Hopefully we will see some, and could proceed to plant them in pot. -
The most recently updated list :D
- Nix
- Cody6268
- munsonhsr
- Alan K.
- SurgeUK
- Tet
- Comis
- Rizio Il Ghiro
- Ulzhan
- Barry Rowland
- Storm
- Sos24
- Old Lefty
- Alexanderre
- Echotech
- ReamerPunch
- Simon_Templar
- Fast Bill
- VICMAN
- Ron Who
- BobbyRsa (late start)
- Borg
- FoBo
- zrxoa1
- ElevenBlade
- FolderBeholder
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
