One Eleven 'n One Twenty-one
-
Day 5.
Fastenal, last week, sent me a large gasket instead of this tool. I was refunded the money, but to my surprise, I was sent the tool today. It was just about $12, but I made sure it was sorted out. I used the belt cutter to rip open the clam pack, but I will admit, I used my Benchmade Mini Griptillian clipped to my left pocket to cut the tape on the box, since I was anxious to see whether they got it right this time.
<a href="https://flic.kr/p/2kpbxGa" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50801808277_cdb075bbbc_c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>111mm Challenge Day 5 by cody6268, on Flickr
For comparison, here's what I was sent (and the exact photo I sent to Fastenal CS) last week. I'd ordered bearings and the tool. From what I'm seeing, it's a regular problem. Our local Fastenal franchise (whom I called first, despite item has the problem constantly, as does employees of local businesses who use Fastenal.
-
@Simon_Templar said:
Fair enough, but for what it's worth, the two Philips drivers in the Hercules and Workchamp are quite different and you get them "for free" with the scissors and pliers anyway, so why settle for less? On the other hand, if you wanted to be MacGyver, you couldn't touch anything bigger than the Adventurer anyway...The dual Phillips drivers in the Hercules is a nice addition. I don't think I use either very often, but I like having them.

-
@Simon_Templar said:
I agree the Hercules feels reasonably sized. I carry it in my jeans pocket instead of my usual EDC, a CT34, and to tell the truth I hardly notice the difference. The pocket bulges a bit more than before, much to the chagrin of my wife, but other than that it feels even better given that it doesn't get stuck sideways at the bottom of the pocket. I suppose the Outrider might feel even better still, but I consider the Hercules the better package overall. After all, if you carry a 111 mm SAK, you have opted against an inconspicuous size anyway, so you might as well add the pliers and another Philips.Fair enough!
-
@Nix said:
The dual Phillips drivers in the Hercules is a nice addition. I don't think I use either very often, but I like having them.
The scissors layer Phillips is #0/1, while the pliers layer Phillips is #2, correct?
Hercules are bloody expensive, but I'm hoping I can find a used one cheaply before the end of this challenge.
-
@cody6268 said:
The scissors layer Phillips is #0/1, while the pliers layer Phillips is #2, correct?Hercules are bloody expensive, but I'm hoping I can find a used one cheaply before the end of this challenge.
Correct. Good luck with the hunt; I believe it's worth it. Like the Champion or the Handyman, the Hercules is a SAK for connoisseurs. If you get it, you are likely to have made a deliberate decision, as opposed to just getting the flagship Swisschamp or Workchamp and "be done with it".
-
Day 04
The pre- 2017 Adventurer opened some mail today. -
Day 5
The watch cases I keep my SAK’s in have multiplied since joining MTo, no surprise to anyone there then

Decided I needed a way to access each case more easily and came across this little shelving unit, glad I measured twice (didn’t need to cut once but you know the drill), perfect fit

Used Outrider throughout except did need a hammer to tack the back






-
Day 4:
Back to work after being off since 12-23-20. For my use tonight I opted for my Centurion with the modded Sentinel pocket clip scales.
No pics of use because I’m not really supposed to have my phone out. It’s dinner time right now...
Just been cutting up cardboard. Opening boxes. Cutting parts bags open. Also used can opener/driver to tighten some screws on a flat screen monitor mount.


Sent from my iPhone using Tapatalk
-
Day 4
The day flew by, so I’m a little late. The Outrider helped open up and cut the plastic/tape wrapping off a new paper shredder that was a Christmas gift.

-
Echotech: a cool use and spiffing result!
Sent from my iPhone using Tapatalk
-
Day 5
Quiet day as first day back at work was heavy on paperwork . Just nipping up loose screw on a door handle . SD may be a wee bit bigger than is actually required :D
-
Day 5

-
Day 5:
Clearing some snow from paws (it is -5 C so snow still stucks pretty well, especially when Spanish Water dog is not really designed for deep snow):

Opening a new tea package:

Sent from my iPhone using Tapatalk
-
Interesting use for the cheese knife - I’m sure your hound appreciated the de-snowing!

-
@old Lefty said:
Day 5:
Clearing some snow from paws (it is -5 C so snow still stucks pretty well, especially when Spanish Water dog is not really designed for deep snow):

Opening a new tea package:

Sent from my iPhone using Tapatalk
Didn't know you could use the cheese blade to clean dogs. Interesting. Although I wonder if you can ever get back to cutting cheese (and afterwards eating it) with it now that you know where it has been...

-
^ and ^^
Thanks gents! The tip actually worked pretty well, good care however, was required. The tool is quite sharp after all.
I did clean it afterwards naturally, so cheese will be consumed.. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

