It's not just me!
-
So far ive never had rust problems with any of my Leathermans. I live in Northern Ireland so we have plenty of wet conditions. All my tools are constantly used every day and they get wet at times. I do have a weekly clean out and oil up though and i dont store them in their sheaths when they are not being carried which i think helps. Then again im the guy who oils and polishes the leather sheath for his Fuse!
I really must get out more!
-
i think humidity is more of an issue actually. I have in the past dropped my skeletool on sea water while foraging for wild oysters, mussels and abalone. It stayed in the water for a few minutes and i cleaned it with fresh water after and oiled it a bit then presto - no rust till this day.
My sog powerlock however, has never tasted, nor been near salsmurfer. I have brought it with me on several jungle camping trips and forest adventures. Now Humidity in our local jungles are quite oppressive at times that it dehydrate you to extremes. Consequently, after these said adventures, rust spots have developed on my powerlock but with a little bit of WD40 and a lot of elbow grease, It has happily been restored back to its original luster.
-
I have lived near the coast all my life. I had the old Wave for 12 years before warranty replacement. I used it to cut fruit with the main blade from time to time, using alcohol swabs I had ready access to, before and after. Only the can opener touched food otherwise and only ever got a 2 second rinse with fresh water. The pliers came in contact with water, blood and goodness knows what else on a regular basis. It lived in the nylon sheath on my duty belt. I think it only got one major dunking. Can't remember if it was fresh or salt water. Some time after shelving it for months I found rust mainly inside the corners where the scissors and can opener rest etc. I painstakingly removed the rust with cotton buds and then 1000 grade sandpaper followed by some light machine oil on the previously effected areas. Thought that would be the beginning of the end, but never had another issue. And I don't think it had another clean for the next 5 years or so. My only real beef with LM is the serrated blade. It ain't that sharp. But I digress.
So far. No rust in the Style CS or ST300, but the latter has seen hardly any use. -
My Super Tool 300 gets rust spots on both blades, especially the rescue blade. Cleaned it with mineral oil.
I've never had a problem with my Micra, Style CS or Skeletool.
I did see a Wave in a clamshell with rust spots a year or so ago. Asked a stocker about it, he made a crack about Leatherman quality not being what it used to be. No discounts.Uneducated as I am, I think I prefer the 420 to the higher chrome steels. As I said, only rust problems I have are on the bead blasted parts. If Leatherman insists on matte finishes, they should use a more rust resistant steel in those areas. However, for something I beat on like the Skeletool, I think 420 is alright, if not best.
-
I think you need to change your name, how does Rusty Lamontagne sound?
If only they ditch the bead blast finish they'd have better corrosion resistance, but everyone just loves it because it's quick and cheap to do. Even Victorinox is jumping on the wagon (saw their backlock folder in store the other day, bead blasted, disappointing).
-
@derekmac said:
Now with me poking fun at LM, I do have to say I just gave my TTi a good look over and it doesn't have a single spec of rust on it. I have been swimming with it in my pocket, cut plants with the blades, cut down a small tree with the saw (still bits of wood in the teeth) and after use it gets put right back in my pocket, wet or not.Now I do have to admit that when I first got this from Metro, I gave it a good bath of aerospace corrosion inhibitor, so that could be why it hasn't developed any rust yet, but can't say for certain.
I'm interested now.... Tell me more about the rust inhibitor bath.

-
As a Victorinox user for almost three decades, with SAKs used in snow, mountain dew, rainy and extremely salty sea environments, I am negatively impressed. I wouldn't like to worry about rust on my Surge or Juice, for the price these things have here.
-
I just today noticed rust on the wire cutters on my Wave. I haven't even used the pliers or wire cutters yet but oh well. I'm from a very wet place so rusting knives is a norm for me. But living in the desert now doesn't make any sense.

I'm going to pull the steel wool out tomorrow and get rid of the surface rust. -
@campussecurity said:
I just today noticed rust on the wire cutters on my Wave. I haven't even used the pliers or wire cutters yet but oh well. I'm from a very wet place so rusting knives is a norm for me. But living in the desert now doesn't make any sense.
I'm going to pull the steel wool out tomorrow and get rid of the surface rust.Don't use steel wool on it. That will introduce more carbon steel to the nooks and crannies which will make more rust. Just use a rag and oil. If deeper pitting is evident use crocus cloth and oil. tom. ;)
-
Marine Tuff Cloth will fix the problem . I treat knives/tools on or about the person just like guns . Ont. is also pretty humid , come summer .
Chris
-
Had rust spots forming on the wire cutters of my Charge TTi and on the blade of my Skeletool CX probably into a month of use.
A little bit of Autosol metal polish and a little bit of polishing got rid of the rust. Never had any further problems since. This is with EDC of my tools daily in 100% humidity here in the tropics.
-
My wife is an archaeologist and several people on her field crew had Leathermans of different types. All of them rusted before the week was over. Now the people on her team buy the cheap Chinese knockoffs because they’re just as good.
Conversely, my vintage original LM Supertool has been used & abused for 18 years and still no rust. Maybe the vintage LMs had better quality steel?
-
Sadly, that's when they cared more about quality and happy customers than sales, target goals and cost reduction.
Sent from my HTC One using Tapatalk 4
-
@shamus said:
My wife is an archaeologist and several people on her field crew had Leathermans of different types. All of them rusted before the week was over. Now the people on her team buy the cheap Chinese knockoffs because they’re just as good.Conversely, my vintage original LM Supertool has been used & abused for 18 years and still no rust. Maybe the vintage LMs had better quality steel?
They need some Vic spirit x's :D
-
@shamus said:
My wife is an archaeologist and several people on her field crew had Leathermans of different types. All of them rusted before the week was over. Now the people on her team buy the cheap Chinese knockoffs because they’re just as good.
Conversely, my vintage original LM Supertool has been used & abused for 18 years and still no rust. Maybe the vintage LMs had better quality steel?
They need some Vic spirit x's :D
haha! I said that. She replied that archaeologists are too cheap. :D
-
If they could afford a Leatherman?
-
Sadly that was my experience with LMs too :/
Luckily I'm more than happy to be on the road to swiss perfection! :)
Sent from my Nexus 7 using Tapatalk 2
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
