Leatherman MUT?

Viking · **Reply #180 on:** February 12, 2010, 01:18:58 AM

Well, I hope one of us here on MTO gets it!!

J-sews · **Reply #181 on:** February 12, 2010, 03:42:52 AM

The picture in the auction with a MUT alongside an AR15 was taken at the SHOT show presentation. (here's a pic Grant shot with the same gun nearby)

With no picture of his own, it makes me doubtful that he actually has a MUT available for sale. $:-\$

Chako · **Reply #182 on:** February 12, 2010, 12:00:14 PM

I emailed him and got a response. He claims he has one up for sale.

I just got overtaken on the bid. Pondering on if I should go for this one all out or not. It would be kind of cool to nab it for plenty of photographs.

Just wondering on how he has one...and still very suspicious as he hasn't taken any photographs of it other than those that Leatherman has published.

Viking · **Reply #183 on:** February 12, 2010, 02:41:57 PM

Did you ask him to take some photo's of it?

1jump2many · **Reply #184 on:** February 12, 2010, 03:20:18 PM

Isn't MSRP going to be $150, when it's released? I see it's just over MSRP now. So now we'll see how much someone wants to pay to be able to say they had one first. Forward ahead to September........ "Oh, Youuuuuuuu just got your MUT now?. I've had mine since February"

bdl931 · **Reply #185 on:** February 13, 2010, 01:56:08 AM

As someone who works with with the M-16 family and weapons of all size on a daily basis,the MUT will be definatly in my hands the day it becomes available.
For the lucky folks who already have one: I've read all the product sheets,seen all the movies as well as followed this thread religiously but haven't seen any good close ups of the MOLLE sheath or the sight wrench. Does anyone have a couple of pics they could throw on here? I've read that the wrench has a diamond file on one side and a roamer on the other. Also does the sheath have the pocket inside the sheath for a bit kit or extra bits and pieces?
Thanks for the excellent coverage so far.

Grant Lamontagne · **Reply #186 on:** February 13, 2010, 02:41:49 AM

Look on the first page of this thread- we had the first independent photos of the MUT up within a couple of hours of it being released. I think we got some good ones.

Def

Multitaskertools · **Reply #187 on:** February 13, 2010, 03:15:26 AM

Quote from: bdl931 on February 13, 2010, 01:56:08 AM

the sight wrench. Does anyone have a couple of pics they could throw on here? I've read that the wrench has a diamond file on one side and a roamer on the other.

Sight wrench? You mean the spanner wrench?

Charger · **Reply #188 on:** February 13, 2010, 08:13:47 AM

Quote from: Styerman on January 23, 2010, 04:12:39 PM

I can see this creature spawning other variants . The "hammer " pommel will play well on other models , replaceable task specific implements , and long drivers will play well with lots of users . I can see an EMT and Fire version , not to mention a Police version .

Chris

This would be a dream come true. I just entered the EMS a while ago and looking at this set up, a few tweaks would make this perfect. I would swap the saw for some good serated scissors, and the gun specific items for an awl and some other things, and slip an O2 wrench cut out somewhere...dang this thing is fine. honestly, LM has amazing innovations here. My first impression was "gerber-gimmik" and "tacticool", trying to play to those guys who buy anything that relates to the word that starts with T. But looking closer, this thing is well thought out and opens the door for a new line of products. I think going user specific like this is a risk but if they plaay their cards right, this could be great.

1jump2many · **Reply #189 on:** February 13, 2010, 03:43:47 PM

I'm wondering, is it just me or is the MUT becoming a bit over hyped? It's a nice tool, but the AR tools on it are lacking compared to the Multitasker. If the Multitasker had been designed by Leatherman, would it be receiving the same interest? I have no bias, I own 60 or so Leatherman MT's, but I just don't see how great of an AR maintenance tool the MUT is. Like others have mentioned, it is a nice platform and it could be the future of several other MT's. Comparing it's tool lineup with the Multitasker when it comes to AR maintenance it fails. The Multitasker seems to be focused more on being an AR maintenance tool. But it seems the MUT is trying to be too many things, an AR maintenance tool and an all around MT.

Viking · **Reply #190 on:** February 13, 2010, 04:29:22 PM

Well, the ebay bid is up to $202.50 now.

Chako · **Reply #191 on:** February 13, 2010, 05:39:27 PM

And I just lost it.

Someone out there is cursing me for jacking it so high. Guess he wanted it more than I did.

Going to wait for the official release or whenever they become public.

bdl931 · **Reply #192 on:** February 13, 2010, 05:49:46 PM

Quote from: Multitaskertools on February 13, 2010, 03:15:26 AM

Quote from: bdl931 on February 13, 2010, 01:56:08 AM
the sight wrench. Does anyone have a couple of pics they could throw on here? I've read that the wrench has a diamond file on one side and a roamer on the other.

Sight wrench? You mean the spanner wrench?

Terminology differences. American M-16 family of rifles do indeed have a dedicated front post,rear aperture sight adjustment tool.current Canadian issued M-16 family,Known as the C-7A2 does away with the rear aperture and comes standard issue with a 3.4X Alcan optical sight.
Since the box end wrench was designed primarily with optical sight adjustment,I used the term we commonly use for a similar tool.
Pics available if you want.

Multitaskertools · **Reply #193 on:** February 13, 2010, 06:55:24 PM

Quote from: bdl931 on February 13, 2010, 05:49:46 PM

Quote from: Multitaskertools on February 13, 2010, 03:15:26 AM
Quote from: bdl931 on February 13, 2010, 01:56:08 AM
the sight wrench. Does anyone have a couple of pics they could throw on here? I've read that the wrench has a diamond file on one side and a roamer on the other.

Sight wrench? You mean the spanner wrench?

Terminology differences. American M-16 family of rifles do indeed have a dedicated front post,rear aperture sight adjustment tool.current Canadian issued M-16 family,Known as the C-7A2 does away with the rear aperture and comes standard issue with a 3.4X Alcan optical sight.
Since the box end wrench was designed primarily with optical sight adjustment,I used the term we commonly use for a similar tool.
Pics available if you want.

Ah it makes sense.

I know the Colt Canada (Diemaco) specs; the ELCAN is nice glass (albeit a bit bulky), the new Elcan SPECTRE series is pretty slick though.

The std spec Multitasker comes with the 3/8" box wrench ON the tool (not as an extra throw-in); im a big fan of LaRue Tactical and all of Mark's mounts have that 3/8" tensioning nut on them, so it was one of the first tools we spec'd on our tool

Multitaskertools · **Reply #194 on:** February 13, 2010, 07:37:55 PM

Quote from: 1jump2many on February 13, 2010, 03:43:47 PM

I'm wondering, is it just me or is the MUT becoming a bit over hyped? It's a nice tool, but the AR tools on it are lacking compared to the Multitasker. If the Multitasker had been designed by Leatherman, would it be receiving the same interest? I have no bias, I own 60 or so Leatherman MT's, but I just don't see how great of an AR maintenance tool the MUT is. Like others have mentioned, it is a nice platform and it could be the future of several other MT's. Comparing it's tool lineup with the Multitasker when it comes to AR maintenance it fails. The Multitasker seems to be focused more on being an AR maintenance tool. But it seems the MUT is trying to be too many things, an AR maintenance tool and an all around MT.

I know Leatherman is the brand to beat, but I relish the challenge (in this arena).

bdl931 · **Reply #195 on:** February 13, 2010, 10:12:05 PM

The Multitasker looks like a excellent user/armorer maintenance tool.For myself,I'm looking at the MUT not just a pers weapon maintenance tool,but also as a all around weapons orientated tool( I have so many M-16 specialty tools that I almost never use anyway).
The one thing that really draws me in to this tool is the replacable punch holder.This lends itself to mods perfectly.I can see a whole raft of gizmos being made up in my down time.
And of course,look cool factor

geoemt · **Reply #196 on:** February 14, 2010, 01:05:41 AM

WooHoo!!! Check this out!

[youtube] [/youtube]

Want one want one!!

Regards
Guillermo

DaveK · **Reply #197 on:** February 14, 2010, 01:42:08 AM

It's fair to say that video hasn't dissuaded me from wanting one

They're really pushing this one aren't they? I don't recall a launch and marketing campaign like this before from LM. It must have cost them a bit to develop I guess

genevabuck · **Reply #198 on:** February 14, 2010, 01:54:46 AM

The military is a huge market for multi tools. Leatherman made a good move here.

J-sews · **Reply #199 on:** February 14, 2010, 02:06:34 AM

Quote from: DaveK on February 14, 2010, 01:42:08 AM

It's fair to say that video hasn't dissuaded me from wanting one

They're really pushing this one aren't they? I don't recall a launch and marketing campaign like this before from LM. It must have cost them a bit to develop I guess

Its a full court press for sure. I wonder how much a professional video ad like that costs? I'm guessing six figures at least...

Multitaskertools · **Reply #200 on:** February 14, 2010, 02:20:49 AM

Quote from: DaveK on February 14, 2010, 01:42:08 AM

It's fair to say that video hasn't dissuaded me from wanting one

They're really pushing this one aren't they? I don't recall a launch and marketing campaign like this before from LM. It must have cost them a bit to develop I guess

yea, i think "someone" got the jump on them

Chako · **Reply #201 on:** February 14, 2010, 02:44:29 AM

Oh great...now I will have to get 2 different models as my goal is to get one of everything Leatherman has ever made.

Hmmm...

I don't have a Multitasker yet in the collection.

geoemt · **Reply #202 on:** February 14, 2010, 02:57:30 AM

Chako....3 versions, not 2.

Chako · **Reply #203 on:** February 14, 2010, 03:04:24 AM

Ok...

That is going to be a bit expensive.

MultiMat · **Reply #204 on:** February 14, 2010, 03:23:56 AM

Quote from: Chako on February 14, 2010, 03:04:24 AM

Ok...

That is going to be a bit expensive.

I have faith in you mate

(pics please

)

1jump2many · **Reply #205 on:** February 14, 2010, 03:51:58 AM

After watching that video I've gained more interest in the MUT Utility. Because you will still need a cleaning kit, whether you're a civilian or Soldier, the cleaning rod adapter and the bronze carbon scraper seem unnecessary. But the bolt override tool, the removeable firearm disassembly punch and hammer are are nice innovations. They aren't marketing it as a AR maintenance tool but more like "a Soldier's best friend in the field". I had to laugh at the part where they were cutting into a steak. And how on one hand the expert is showing how to use the bolt override tool and later you see Junior cutting his fishing line at camp.

I imagine it will be a very big seller for them. As I've mentioned earlier in the thread, I will end up buying one. Most likely the non BO Utility MUT, but not the EOD.

WH867 · **Reply #206 on:** February 14, 2010, 07:16:38 AM

Quote from: geoemt on February 14, 2010, 02:57:30 AM

Chako....3 versions, not 2.

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

I think that they need the Gerber logo on that one in the middle picture. Lot of "borrowed" ideas on that one

genevabuck · **Reply #207 on:** February 14, 2010, 07:18:42 AM

Chako: I am a an educator in the U.S. How much do you guys make up there? Maybe I should move to Canada?

AHB · **Reply #208 on:** February 14, 2010, 08:39:02 AM

Quote from: genevabuck on February 14, 2010, 07:18:42 AM

Chako: I am a an educator in the U.S. How much do you guys make up there? Maybe I should move to Canada?

cerbera147 · **Reply #209 on:** February 14, 2010, 10:07:07 AM

Quote from: genevabuck on February 14, 2010, 07:18:42 AM

Chako: I am a an educator in the U.S. How much do you guys make up there? Maybe I should move to Canada?

I guess it's what your vices are

I don't smoke, barely drink or gamble [no I haven't been born again

] so a bit of extravagance on multi's is alright by me

Hello Lurker! Remove this ad and much more by logging in.

Leatherman MUT?

Donations

Community Links