Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


And so it begins.... (My adventures into Alox!)

Syph007 · 6035 · 1299049
« previous next »
Pages: 1 ... 94 95 96 97 98 ... 202   Go Down

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,938
  • Oxygen and magnesium toghether?! OMg!
Re: And so it begins.... (My adventures into Alox!)
Reply #2850 on: July 08, 2015, 12:30:40 PM
Quote from: Syph007 on July 08, 2015, 03:23:23 AM
Quote from: pfrsantos on July 07, 2015, 01:35:36 PM
Quote from: Syph007 on April 05, 2015, 01:53:00 AM
Well I did some kind of chemistry here by accident...  :think:

The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

(Image removed from quote.)

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

 :tu: :tu: :tu: :tu:

Im sure i could do it again ya.  The anodize part was good, but I didnt care for the brass turning black.

Could the brass cross be taken out? To leave it hollow, like in the new scales you just did? Or is the brass too "stuck" in place to remove?
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2851 on: July 08, 2015, 05:17:58 PM
Quote from: pfrsantos on July 08, 2015, 12:30:40 PM
Quote from: Syph007 on July 08, 2015, 03:23:23 AM
Quote from: pfrsantos on July 07, 2015, 01:35:36 PM
Quote from: Syph007 on April 05, 2015, 01:53:00 AM
Well I did some kind of chemistry here by accident...  :think:

The center was polished brass and I wanted to anodize the rest blue... didnt quite work, but its interesting.

(Image removed from quote.)

This, for me, is still the most beautiful scale you made so far. Can you replicate this "accident"? If I ever get the funds, I'll be asking you to build me a SAK with this cross.

 :tu: :tu: :tu: :tu:

Im sure i could do it again ya.  The anodize part was good, but I didnt care for the brass turning black.

Could the brass cross be taken out? To leave it hollow, like in the new scales you just did? Or is the brass too "stuck" in place to remove?

Yup I could punch it out after.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2852 on: July 08, 2015, 05:18:39 PM
Here is my latest completed Ti mod.  :D





PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

gr Offline Sakpan74Gr

  • Full Member
  • ***
    • Posts: 215
Re: And so it begins.... (My adventures into Alox!)
Reply #2853 on: July 08, 2015, 05:46:08 PM
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?

us Offline SAK Guy

  • *
  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,929
  • "Spending all of my money and time Oh, ho ho...'"
Re: And so it begins.... (My adventures into Alox!)
Reply #2854 on: July 08, 2015, 05:53:13 PM
Very cool Syph!!!!!!
- Robert




Quo Fata Ferunt
"It's sad that governments are chiefed by the double tongues." - Ten Bears
Merit Badges Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of your outdoor cooking Must buy something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a picture of fire making kit or fire with a multitool Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 130mm models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your Mora knives in use Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with photos of your astronomy gear with a multitool

pt Offline pfrsantos

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,938
  • Oxygen and magnesium toghether?! OMg!
Re: And so it begins.... (My adventures into Alox!)
Reply #2855 on: July 08, 2015, 06:34:37 PM
Quote from: Sakpan74Gr on July 08, 2015, 05:46:08 PM
Just a crazy idea. Would it be possible to use Leatherman mini pliers from the Squirt or the Style PS as the basis, and add SAK 58mm tools and your scales?

What is this "Leatherman" model you talk about?! I know not of any such Victorinox...

 :think: :think: :think: :think:
________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

I'd give my right arm to be ambidextrous.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT


gr Offline Sakpan74Gr

  • Full Member
  • ***
    • Posts: 215
Re: And so it begins.... (My adventures into Alox!)
Reply #2856 on: July 08, 2015, 08:17:00 PM
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.

ch Offline Etherealicer

  • Admin Team
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,034
Re: And so it begins.... (My adventures into Alox!)
Reply #2857 on: July 08, 2015, 08:42:44 PM
Quote from: Sakpan74Gr on July 08, 2015, 08:17:00 PM
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.
Check this out: 58mm with pliers experiment
It wouldn't be the internet without people complaining.

gr Offline Sakpan74Gr

  • Full Member
  • ***
    • Posts: 215
Re: And so it begins.... (My adventures into Alox!)
Reply #2858 on: July 08, 2015, 08:50:28 PM
Quote from: Etherealicer on July 08, 2015, 08:42:44 PM
Quote from: Sakpan74Gr on July 08, 2015, 08:17:00 PM
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.
Check this out: 58mm with pliers experiment
Oh yes, I am aware of this. I had the same idea! But I was thinking that the 91mm pliers are not the most suitable, because they do not fold, and the tool is bigger. Since there are no Victorinox mini folding pliers, other manufacturer's pliers might be used.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2859 on: July 09, 2015, 01:34:08 AM
And just one of those little alox ones today...  :whistle:









PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline SAK Guy

  • *
  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,929
  • "Spending all of my money and time Oh, ho ho...'"
Re: And so it begins.... (My adventures into Alox!)
Reply #2860 on: July 09, 2015, 02:03:06 AM
 :sa: :drool: :drool:
- Robert




Quo Fata Ferunt
"It's sad that governments are chiefed by the double tongues." - Ten Bears
Merit Badges Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread showing photos of your outdoor cooking Must buy something on EDCSource Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a picture of fire making kit or fire with a multitool Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread with photos of at least 8 different 130mm models in your collection Must start a thread with a photo of your birth year SAK Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your Mora knives in use Start a new thread with photos of at least 12 different 111mm models in your collection Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with photos of your astronomy gear with a multitool

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,302
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #2861 on: July 09, 2015, 03:07:13 AM
That's a beauty Syph :tu:

Sent from my XT901 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread with pictures of a Fish Scaler in use Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,853
Re: And so it begins.... (My adventures into Alox!)
Reply #2862 on: July 09, 2015, 03:34:45 AM
Love the blue liners with the black scales, don't think I've seen that before.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: And so it begins.... (My adventures into Alox!)
Reply #2863 on: July 09, 2015, 03:43:52 AM
:ahhh you have blue liners! :drool: :drool: :gimme:
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must buy something on EDCSource Start a new thread and post a photo of a flashlight as part of your EDC

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: And so it begins.... (My adventures into Alox!)
Reply #2864 on: July 09, 2015, 03:44:00 AM
:ahhh you have blue liners! :drool: :drool: :gimme:
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must buy something on EDCSource Start a new thread and post a photo of a flashlight as part of your EDC

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,490
Re: And so it begins.... (My adventures into Alox!)
Reply #2865 on: July 09, 2015, 07:25:42 AM
Quote from: Sakpan74Gr on July 08, 2015, 08:17:00 PM
Just a Frankenstein keychain multitool idea of mine. Maybe a silly idea. Take apart a Style PS,or a Gerber Dime , keep the pliers and add components from a Rambler or a Minichamp, if possible.

Not sure about the LM Style and Squirt pivots, but the Vic 58mm brass pivots are 1.6mm, and the Gerber Dime has 3mm screw pivots. The screw part of the Dime pivot is still bigger than 1.6mm, and there isn't enough meat on the little scissors and other tools from the 58mm to flog out to 3mm.  Perhaps a shorter 3mm pivot that just went through the pliers section and a longer screw could incorporate Vic 58mm tools into the Dime. That would make it worth carrying then.
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo showing the axe in use Start a new thread and post a picture of a fish or fishing kit with a multitool Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a photo of a flashlight as part of your EDC

ch Offline Etherealicer

  • Admin Team
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,034
Re: And so it begins.... (My adventures into Alox!)
Reply #2866 on: July 09, 2015, 07:31:12 AM
 :woohoo: :woohoo: :drool:

That looks fantastic and such a great tool-loadout :D
It wouldn't be the internet without people complaining.

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,490
Re: And so it begins.... (My adventures into Alox!)
Reply #2867 on: July 09, 2015, 07:38:17 AM
I'd definitely carry that if it had the Electrician blade over the hawk bill.  Looks great  :drool:
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo showing the axe in use Start a new thread and post a picture of a fish or fishing kit with a multitool Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a photo of a flashlight as part of your EDC

au Offline TazzieRob

  • *
  • No Life Club
  • ******
    • Posts: 1,490
Re: And so it begins.... (My adventures into Alox!)
Reply #2868 on: July 09, 2015, 07:48:39 AM
Quote from: TazzieRob on July 09, 2015, 07:38:17 AM
I'd definitely carry that if it had the Electrician blade over the hawk bill.  Looks great  :drool:

Oh, and it had scissors
Merit Badges Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread with photos of your Mora knives in use Start a new thread with photos of your chainsaws Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread with a photo showing the axe in use Start a new thread and post a picture of a fish or fishing kit with a multitool Start a thread with photos of at least five different colored ALOX models in your collection Must start a thread with a photo of at least three (3) of your watches Start a new thread and post a photo of a flashlight as part of your EDC

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2869 on: July 09, 2015, 07:02:49 PM
Ive been asked this question more often lately so I thought I should take the time to explain with a sweet MS Paint diagram.

Question... what can cause main blade rubbing on awl in a modded 93mm.
Answer...  If the blade pivot hole is not drilled at the correct angle it can change how the blade sits.  If you look at how angled a 93mm blade is, then picture laying it flat to drill it, it can then alter the pivot angle and then cause the blade tip to sit closer to the backside scale and rub.

« Last Edit: July 09, 2015, 07:04:38 PM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

wales Offline hiraethus

  • Admin Team
  • *
  • Absolutely No Life Club
  • *
    • Posts: 6,967
  • I brake for cake
Re: And so it begins.... (My adventures into Alox!)
Reply #2870 on: July 09, 2015, 07:51:58 PM
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?  :pok:
Merit Badges Start a thread with photos of at least five different colored ALOX models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of a flashlight as part of your EDC Must update or add a page on SAKWiki Must start a thread showing a photo of at least three BO tools Start a new thread with a photo of your custom ALOX with scissors Start a thread with a photo of a repair you made with duct tape Start a new thread with photos of camping, including those showing preferred camping equipment Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Must start a thread with a photo of your birth year SAK

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2871 on: July 09, 2015, 08:04:22 PM
Quote from: hiraethus on July 09, 2015, 07:51:58 PM
Isn't it about time you commissioned a batch of 3mm hardened stainless pivots?  :pok:

Since I mostly work on 91mm size now its not worth it.  :D  2.5mm pivots would be too small I think to be strong enough.  Drilling out tools and springs for a mod is maybe 30 minutes of effort.  Blade layer and opener layer springs dont even need drilling.

1/8 inch carbide bits are cheaper too then metric around here so it's just easier to stick to imperial.  75% of the effort in the modding time on the 91s is working on the scales anyhow, so Im trying to figure out faster ways to finish the Ti scales.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2872 on: July 13, 2015, 05:05:42 PM
I still havent finished up the textured Ti mod as I was off camping for the weekend, but I should have it together tonight.

I did finish a plain scaled Climber though.  :D









PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2873 on: July 13, 2015, 10:22:22 PM
And here we have the textured one... and its for me!  Havent built myself one in ages and Ive been wanting a textured Ti 91mm in my favorite configuration... super tinker with tweezers!  :D











PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: And so it begins.... (My adventures into Alox!)
Reply #2874 on: July 13, 2015, 10:34:07 PM
Very nice! :tu: :drool:
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must buy something on EDCSource Start a new thread and post a photo of a flashlight as part of your EDC

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2875 on: July 13, 2015, 10:57:29 PM
Forgot the comparison pic vs standard super tinker.  People always ask about thickness of these conversions.  Noticeably thinner due to thinner scales and dropping the outer liners.   :tu:

PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Demel

  • *
  • No Life Club
  • ******
    • Posts: 2,477
Re: And so it begins.... (My adventures into Alox!)
Reply #2876 on: July 13, 2015, 11:00:01 PM
Wow. Those textured scales are worth :drool: over. Great job as always!!!
"Talent is God given. Be humble. Fame is man-given. Be grateful. Conceit is self-given. Be careful." -John Wooden
Merit Badges Start a new thread with photos of your titanium gear with a multitool or sak Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start new thread with photos of multitools (Magazine/Catalogue type photos) Start a new thread with a photo showing the Hook in use Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of at least five (5) of your watches Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge.

us Offline mrynnr

  • SAK Addict
  • *
  • No Life Club
  • ******
    • Posts: 4,188
Re: And so it begins.... (My adventures into Alox!)
Reply #2877 on: July 13, 2015, 11:01:24 PM
:drool: :gimme:
Merit Badges Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo showing the axe in use Must start a thread showing a photo of at least five BO tools Start a thread with photos of at least twelve different colored ALOX models in your collection Start a new thread with a photo showing the Hook in use Must start new thread with photos of multitools (Magazine/Catalogue type photos) Must start a thread with a photo of your birth year SAK Start a new thread with a photo of a modded knife or multitool with your EDC Must buy something on EDCSource Start a new thread and post a photo of a flashlight as part of your EDC

us Offline captain spaulding

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 20,793
  • What's the matter, kid? Don't ya like clowns?
Re: And so it begins.... (My adventures into Alox!)
Reply #2878 on: July 13, 2015, 11:48:27 PM
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.


Have you thought about doing (or have done) old school ribbed scales?
I'm the milk man!

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,842
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #2879 on: July 14, 2015, 12:02:13 AM
Quote from: captain spaulding on July 13, 2015, 11:48:27 PM
I may be alone on this one, but I don't like the textured scales when the "groves" are large like that.


Have you thought about doing (or have done) old school ribbed scales?

I did some of those on 93mm Ti scales and they work fine.  Never did use them on a build though.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

Pages: 1 ... 94 95 96 97 98 ... 202   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $115.65
PayPal Fees: $7.03
Net Balance: $108.62
Below Goal: $191.38
Site Currency: USD
36% 
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal