Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Leatherman Kore

Sam Lim · 44 · 4301
« previous next »
Pages: 1 2   Go Down

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Leatherman Kore
on: April 25, 2019, 07:00:01 PM
Yeah.. Kore with a K.

K for Klein. Klein Tools.



The original Klein's electrician multi-tool is a big and heavy brick for anyone that has handled before. It's pretty comfy in the hands but its sheer size, weight and limited toolset makes it difficult and hardly worthy to carry around even in a sheath.

Essentially a pliers transplant (again). I really like to have it as an edc at work due to the nature of my job and the combo pliers looks hardy and interesting. So.. here you go.  :D

A partially stripped down Klein Multitool. I should be able to turn the left over knife into a nice folder. The excellent philips and flathead looks to be able to fit into a Gerber.



The 4 long tools are able to retain their position without issue.


Due to the massive pliers taking up most of the real estate, most of the internal tools have to be reworked. Still a WIP.  Leaving them empty for the time being.



Will leave this as is for the moment. Going to have a good think through on what I want in the tool load. Weekend is coming. Pretty excited to start filling the slots.
 :multi:







Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,925
  • Born to multitask.
Re: Leatherman Kore
Reply #1 on: April 25, 2019, 07:13:23 PM
What a beauty! :dd:
Can't wait to see what you manage to cram into it. And that Klein folding knife is not bad either. :like:
Merit Badges Participate in a Challenge thread and post a photo of a tool made in a specific country for thirty (30) consecutive days. Participate in the Challenge thread and post a photo of a Flashlight for thirty (30) consecutive days. Participate in a Challenge, carry a fire-starting item and post a picture daily  (in use if possible) for 30 days. Lighters, matches, ferro rods, fire pistons, Signal, candles, sparkers, tinder, stoves, bowdrill sets. Carry an orange item and post a picture of it everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. ? Create and post MTO-oriented and tool-based memes in the main meme thread. Participate in a Challenge thread, carry a modular tool, and post a photo every day for 30 consecutive days. Find him!

au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,925
  • Born to multitask.
Re: Leatherman Kore
Reply #2 on: April 25, 2019, 07:15:24 PM
Does this mean that the Klein head fits into the Surge?

Leatheman Kurge? :pok:
Merit Badges Participate in a Challenge thread and post a photo of a tool made in a specific country for thirty (30) consecutive days. Participate in the Challenge thread and post a photo of a Flashlight for thirty (30) consecutive days. Participate in a Challenge, carry a fire-starting item and post a picture daily  (in use if possible) for 30 days. Lighters, matches, ferro rods, fire pistons, Signal, candles, sparkers, tinder, stoves, bowdrill sets. Carry an orange item and post a picture of it everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. ? Create and post MTO-oriented and tool-based memes in the main meme thread. Participate in a Challenge thread, carry a modular tool, and post a photo every day for 30 consecutive days. Find him!

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #3 on: April 25, 2019, 07:24:21 PM
Quote from: ReamerPunch on April 25, 2019, 07:15:24 PM
Does this mean that the Klein head fits into the Surge?

Leatheman Kurge? :pok:

Can't..  :( it's about 1mm thicker. That is why I chose the core. The zytel insert are easier to file down.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

se Offline RF52

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,780
Re: Leatherman Kore
Reply #4 on: April 25, 2019, 07:30:29 PM
Nice work Sam! :hatsoff: Would like a plier head like that myself for work carry :like:

Sent fra min FRD-L09 via Tapatalk

Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Participate  in Challenge thread and post a photo of a Explorer SAK for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a 'folding hunter' knife that isn't a Buck 110 for thirty (30) consecutive days. Participants shall carry and use one Soldier knife, the model of their choosing, for the duration of the 90 days and post a picture each day. Build your own version of an MRE using off-the-shelf components, post a photo of the completed MRE and store at room temperature for 6 days or more. Consume the MRE after the storage period and post pictures and descriptions of the contents. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Must start a thread with a photo of your camo SAK Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a Spyderco knife for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the multitool for seven (7) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of an Axe for thirty (30) consecutive days. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread with photos of your slasher/chopper/machete knives in use Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days.

au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,925
  • Born to multitask.
Re: Leatherman Kore
Reply #5 on: April 25, 2019, 07:31:42 PM
That's a shame. Still, I look forward to what the Kore will feature. :popcorn:
Merit Badges Participate in a Challenge thread and post a photo of a tool made in a specific country for thirty (30) consecutive days. Participate in the Challenge thread and post a photo of a Flashlight for thirty (30) consecutive days. Participate in a Challenge, carry a fire-starting item and post a picture daily  (in use if possible) for 30 days. Lighters, matches, ferro rods, fire pistons, Signal, candles, sparkers, tinder, stoves, bowdrill sets. Carry an orange item and post a picture of it everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. ? Create and post MTO-oriented and tool-based memes in the main meme thread. Participate in a Challenge thread, carry a modular tool, and post a photo every day for 30 consecutive days. Find him!

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,460
Re: Leatherman Kore
Reply #6 on: April 25, 2019, 09:49:24 PM
Looks cool !    :multi:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 13,000
Re: Leatherman Kore
Reply #7 on: April 25, 2019, 10:05:33 PM
That looks great Sam  :drool:
Everything’s adjustable

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Leatherman Kore
Reply #8 on: April 25, 2019, 10:20:28 PM
 :like:

What could fit in there... bit driver?

pt Offline FInixNOver

  • Hero Member
  • *****
    • Posts: 825
Re: Leatherman Kore
Reply #9 on: April 25, 2019, 11:05:03 PM
Nice mod! :like: :tu:

Sent from my Redmi Note 5

Merit Badges Start a new thread and post a photo daily of any SAK 74mm or smaller ( you can switch it up daily ) for thirty (30) consecutive days. Start a new thread and post a photo of a fixed blade for thirty (30) consecutive days. Start a new thread with a photo of your custom ALOX with scissors Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: Leatherman Kore
Reply #10 on: April 26, 2019, 07:22:56 AM
Frickin awesome mod, Sam!  :drool:

I was wondering when you were gonna bust up the Klein.   :D

How is the pivot size and snap in with the Klein head in the Core handles?
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #11 on: April 26, 2019, 09:29:39 AM
Quote from: gerleatherberman on April 26, 2019, 07:22:56 AM
Frickin awesome mod, Sam!  :drool:

I was wondering when you were gonna bust up the Klein.   :D

How is the pivot size and snap in with the Klein head in the Core handles?

 :D took me long enough..

The pivot size are smaller on the Klein's. I didn't want to drill cos I need to offset to one side so I have allowance to play with the pliers snap when open. Happy to report it snaps perfectly.  ;)
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #12 on: April 26, 2019, 02:06:55 PM
Quote from: Syncop8r on April 25, 2019, 10:20:28 PM
:like:

What could fit in there... bit driver?

Alot of trial and error this weekend.. Doesn't seems to have alot of space... A little reluctant to reprofiled the pliers..  :ahhh
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: Leatherman Kore
Reply #13 on: April 27, 2019, 06:29:36 AM
Quote from: Sam Lim on April 26, 2019, 09:29:39 AM
:D took me long enough..

The pivot size are smaller on the Klein's. I didn't want to drill cos I need to offset to one side so I have allowance to play with the pliers snap when open. Happy to report it snaps perfectly.  ;)
Thank you, Sam!  :cheers:
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #14 on: April 27, 2019, 03:52:21 PM
Tiring but a rather satisfying day. Manage to load up the Kore. Pretty much all are non stock tools.

Did not manage to get it fully close because of the long philips. For that reach, I can live with the slight gap.  :)

At rest, there's is a slight gap.


Tools when stow. With that massive pliers head, there isn't really much space. Had to do a whole lot of grinding on all the tools to allow the pliers to sit in.





Tool load? I had to reprofile all of them as gave them new nail nicks. Yes there are 2 long phillips in there. Was considering leaving it as is as they are really good. Or, when 1 breaks, I will convert it into a punch or an awl.


Expansion? Still fits typical bits.


 :multi:




Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

au Offline ReamerPunch

  • Thread Killer 2017
  • Global Moderator
  • *
  • Zombie Apprentice
  • *
    • Posts: 11,925
  • Born to multitask.
Re: Leatherman Kore
Reply #15 on: April 27, 2019, 04:12:34 PM
Great work, as always! :like:

If one flathead was like the SOG awl, it would allow a blade in the space the awl is now. :think:
Merit Badges Participate in a Challenge thread and post a photo of a tool made in a specific country for thirty (30) consecutive days. Participate in the Challenge thread and post a photo of a Flashlight for thirty (30) consecutive days. Participate in a Challenge, carry a fire-starting item and post a picture daily  (in use if possible) for 30 days. Lighters, matches, ferro rods, fire pistons, Signal, candles, sparkers, tinder, stoves, bowdrill sets. Carry an orange item and post a picture of it everyday for 30 days.  Carry tools with single functions only. No multi-tools, no multi-layer Swiss Army Knives, no combo one-piece tools and post a photo for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of a SAK-alike, aka multi-layered, knife-based pocket tools for thirty (30) consecutive days. Participate in a Challenge thread and post a photo of  a Bladeless Multitool for 30 days For each of the 30 days, or for as many as you are able to, post a picture of: Progress- Meals- Activities- Gear and participate in the thread and encourage each other. Participate and contribute in Challenge thread and post a photo of either an Axe, MT/Folding knife or Fixed blade (picked at the beginning of challenge) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a Challenge thread, carry at least one black edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one red edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry at least one green edc item, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a SAK, duct tape, and paperclip, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. ? Create and post MTO-oriented and tool-based memes in the main meme thread. Participate in a Challenge thread, carry a modular tool, and post a photo every day for 30 consecutive days. Find him!

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #16 on: April 27, 2019, 04:23:15 PM
Quote from: ReamerPunch on April 27, 2019, 04:12:34 PM
Great work, as always! :like:

If one flathead was like the SOG awl, it would allow a blade in the space the awl is now. :think:

 :hatsoff: that will definitely work. But I didn't want a blade in there. Usually I will have something else that can open one hand or at least from the outside.. Most of the time, a much shorter blade just for slashing.
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,460
Re: Leatherman Kore
Reply #17 on: April 27, 2019, 04:31:33 PM
Absolutely awesome !    :cheers: :like: :tu:
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #18 on: April 27, 2019, 06:59:56 PM
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Leatherman Kore
Reply #19 on: April 27, 2019, 11:59:01 PM
Impressive!  :salute:

us Offline gerleatherberman

  • *
  • Zombie Apprentice
  • ********
    • Posts: 10,565
  • Man of Multiple MultiTool Manufacturers
Re: Leatherman Kore
Reply #20 on: April 28, 2019, 01:02:19 PM
That is one hardkore mod, Sam! :drool:

One of my favs you have done so far. That tool is something one of the big companies needs to make. :like:
Pontificating particularly pious positions pertaining to polymorphic paraphernalia. G-Man.
Merit Badges Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo of at least 5 different Charge models in your collection Start a new thread and post a photo of the multitool for seven (7) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with photos of your astronomy gear with a multitool Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with photos of your Buck knives in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Start a thread with photos of at least 5 different MP600 models in your collection Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Must start a thread with a photo of at least five (5) of your watches Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must buy an item through the MTo Store

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,433
Re: Leatherman Kore
Reply #21 on: April 28, 2019, 03:50:33 PM
I'll just agree to all of the accolades above. Great job Sam!
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,455
Re: Leatherman Kore
Reply #22 on: April 28, 2019, 04:08:54 PM
I already used this smiley once this morning but this mod is totally worth it

 

You are a master at this Sam :dd: I need to make a trip to your homeland one day just to meet you :ahhh All the mods you have made are just so awesome :like: I need a parts pile and an imagination so I can be like you :D :tu:
Merit Badges Find him! Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Participate in a Challenge thread, carry a ratcheting tool, and post a photo every day for 30 consecutive days. Participate in a Challenge thread, carry a Leatherman Bond, and post a photo every day for 30 consecutive days. Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year.

us Offline SteveC

  • Global Moderator
  • Just Bananas
  • *
    • Posts: 72,460
Re: Leatherman Kore
Reply #23 on: April 28, 2019, 04:19:01 PM
This one definitely gets a   


                   
Merit Badges Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the 110 knife for thirty (30) consecutive days. Start a new thread with a photo of a blood blister and Mr Pinchy (Gerber Multiplier) Participate and contribute in Challenge thread and post a photo of a different blade each day for thirty (30) consecutive days. Participate  in Challenge thread and post a photo of a Buck 112 Ranger for thirty (30) consecutive days. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Participate in a challenge by carrying  a GEC knife and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for fifteen (15) consecutive days. Complete a 30 day challenge for carrying a different Multi tool each day of the week based on one of the daily carry threads Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must start a thread showing a photo of at least eight BO tools Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with a photo of a modded knife or multitool with your EDC Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days.

00 Offline Dutch_Tooler

  • *
  • No Life Club
  • ******
    • Posts: 4,433
Re: Leatherman Kore
Reply #24 on: April 28, 2019, 04:52:05 PM
 :iagree: What's more, it sure deserves an entry in the showcase thread
Cheers!
Dutch_Tooler

Location: Southern Germany, most of the time
Merit Badges Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread with photos of your chainsaws Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must start a thread showing a photo of at least three BO tools Start a new thread with photos of your zip ties in use Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.  Start a new thread and post a photo of the Vic Pioneer X for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread with a photo of your custom ALOX with scissors Start a thread with photos of at least 1 MTO branded tool in your collection Test,please ignore Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread and post a photo of a flashlight as part of your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: Leatherman Kore
Reply #25 on: April 28, 2019, 05:24:44 PM
Excellent job Sam  :dd: :like: :like:
fail to prepare prepare to fail
Merit Badges Must put something in order and provide link to the post. Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) For those who posted like a boss. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the LM Crunch  Multitool for thirty (30) consecutive days. Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Start a new thread and post a photo of a traditional folder for thirty (30) consecutive days. Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread with a photo showing the Swiss Army Knife   Toothpick being used in an unusual way. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread demonstrating paracord knot tying Start a new thread with photos of your Buck knives in use Must start a thread with a photo of your camo SAK  Post a pic for Halloween of your pumpkin (or turnip or gourd or whatever you traditionally carve for Halloween!) being carved by any SAK, multitool, pocket or woods knife you may own!  Only available once a year Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread including a photo of shooting at least two (2) different airguns and at least one (1) photo of target (airguns)

Offline Ang

  • Newbie
  • *
    • Posts: 7
Re: Leatherman Kore
Reply #26 on: April 28, 2019, 06:36:48 PM
Those pliers !  :gimme: :gimme: :gimme:

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #27 on: April 28, 2019, 06:48:57 PM
I have totally no idea how to multi quote... So.. a big  :salute: :salute: to every one. GLBM, this is one of the more challenging and fun project due to the space constraint. Alot of eyeball measurement and physical fitting. But it was real fun nevertheless.  :hatsoff: I did some minor change to the load. put in a stock file and shift the awl to the centre.  :)



Quote from: Poncho65 on April 28, 2019, 04:08:54 PM
I already used this smiley once this morning but this mod is totally worth it

 (Image removed from quote.)

You are a master at this Sam :dd: I need to make a trip to your homeland one day just to meet you :ahhh All the mods you have made are just so awesome :like: I need a parts pile and an imagination so I can be like you :D :tu:

Poncho, I am a secret and far away place from you and you are probably going to laugh at my work setup.. so nope.. not going to happen. :facepalm:
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

00 Offline Sam Lim

  • No Life Club
  • ******
    • Posts: 2,306
Re: Leatherman Kore
Reply #28 on: April 28, 2019, 07:12:40 PM
Quote from: Ang on April 28, 2019, 06:36:48 PM
Those pliers !  :gimme: :gimme: :gimme:

I am just glad that Klein released that tool. Otherwise this mod wouldn't have happened.  :cheers:
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed.

nz Offline Syncop8r

  • Absolutely No Life Club
  • *******
    • Posts: 8,801
Re: Leatherman Kore
Reply #29 on: April 28, 2019, 10:32:06 PM
Quote from: Sam Lim on April 28, 2019, 06:48:57 PM
I have totally no idea how to multi quote...
When you are in the message typing window, scroll down and you will see previous messages in reverse chronological order. Each one has an "INSERT QUOTE" button on the right. You can click it for each message you want to quote.

Pages: 1 2   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $42.16
PayPal Fees: $2.92
Net Balance: $39.24
Below Goal: $260.76
Site Currency: USD
 13%
April Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal