The Nessmuk Challenge
-
@David said:
Yes much better but I'm not fully recovered yet. I did go to work today.Hope you'd feel better soon!
@cody6268 said:
Day 9, opened some packages<a href="https://postimg.cc/dD612Ghw" target="_blank" rel="noopener noreferrer"><img src="https://i.postimg.cc/dD612Ghw/KIMG2110.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Nice Buck!
Cody, btw, I finally went out to do a little shopping after the '3rd wave" has finally subsided, and saw this in my local mall, I thought you may get a kick out of this:
Tomica 50th year anniversary booth (670 million cars sold)

I don't quite recall I actually have the real Tomica back in the days, they were pretty expensive back then. Can't leave the booth without getting a few of my own:


-
@Alan K. said:
I agree with Nix about the vegetarian MREs being more palatable than most. Some years back I found I enjoyed the vegetarian patty in tomato sauce, although it may have been the interesting texture more than the flavor, and since nobody else wanted to eat the vegetarian meals they were all mine. Those and the breakfast meals were pretty good, or at least they were actually edible.Day 09
With nothing to do today it became a quick maintenance day and I gave the Frost Little Black Talon and the Tramontina machete a few strokes each with a really old German made steel (that I bought for 25 cents) to hone them back to an acceptable sharpness.Being a big fan of Mountain House freeze dried food, I plan to try and get some MREs in the future. I think the benefit of the MRE is they don't seem to need any boiling water but the shelf life seem shorter.
Btw, can you believe there is a youtube review channel dedicated to MRE eating and review? Just browsing the titles, I think he ate all kinds of MREs worldwide, all the way back from WWII to modern:
https://www.youtube.com/channel/UC2I6Et1JkidnnbWgJFiMeHA/videosTalking about sharpening steel, I always hear different schools of thought on them--some say sharpening is removing steel, so it's always better to 'realign' the steel instead of removing them. Other school would say those realigned steel could be counter productive in longer run, since the knife may be sharp right after service, but the edge may blunt very quickly again if the edge steel is 'fatigued'.
What's everyone's thought about that? How would you choose one way or the other? Based on different circumstances?
-
Comis, using a steel is honing the edge not sharpening it so you are not removing material from the edge you are realigning it. Squaring away any microscopic chips, cracks, waviness, or edge roll that developed from use. I only use a sharpener on a very poor edge when I am basically creating a new edge from scratch, and that does remove material from the edge and eventually wears down a blade.
I have not encountered any weakness in any edge after honing with a steel. My edges last a long time. You see chefs honing their knives with a steel frequently but kitchen knives are different than field knives. -
Day 2:
SwissChamp attending moonclipping duty:

Sent from my iPhone using Tapatalk
-
Day 10
I found these pieces of a broomstick and I cut off the broken ends. Looks like I have a spindle.


I also got to strip the bark off the slingshot. The Light My Fire Mora has a thinner blade and is better at this task, but the Companion Spark did the job just fine. The wood is not completely dry. Should be good enough.

-
@old Lefty said:
Day 2:
SwissChamp attending moonclipping duty:

Sent from my iPhone using Tapatalk
After your post, I just went on youtube and learn about the moonclip. Learn something new today, thank you!
@ReamerPunch said:
Day 10I found these pieces of a broomstick and I cut off the broken ends. Looks like I have a spindle.


I also got to strip the bark off the slingshot. The Light My Fire Mora has a thinner blade and is better at this task, but the Companion Spark did the job just fine. The wood is not completely dry. Should be good enough.

Cool! Any plan to make fire with that?
:D -
Nothing says 'bushcraft' more than a bowdrill fire.

The broomstick spindle is as straight as it can be, and a good diameter. A little too smooth, so I'll scrape it with the Mora's spine to rough it up a little, to get the cord to bite into it. I'll keep an eye for the other parts, and give it a go. -
Day 10


Use the GB Wildlife hatchet to crack open a coconut. I used to chop into the young coconut with brute force, using either a big blade or axe, to cut a square and crack open the coconut. But lately I did some quick research on internet, and turns out I could first remove the husk and to pry the coconut at a weak point to open a perfect hole on top. I will try to open more coconuts in the next few days with my fixed blade and my SAK(don't know whether that's feasible, but worth it's trying) :D
-
Nice job, there, comis!

-
@ReamerPunch said:
Nothing says 'bushcraft' more than a bowdrill fire.

-
@Alan K. said:
Comis, using a steel is honing the edge not sharpening it so you are not removing material from the edge you are realigning it.I think it is confusing because people use the terms differently. I think I use 'honing' and 'sharpening' the same way you do. However, I've heard people say they use a steel to 'sharpen' a knife. (True, the knife is sharper after being steeled.) And I've heard people say they 'honed' an edge on whetstone....which to me was always 'sharpening.'
At this point, it's a semantics issue. I did a quick check of an online dictionary. Merriam-Webster for Hone: "to sharpen or smooth with a whetstone". They seem to feel honing and sharpening are used interchangeably.
Cook's Illustrated: "A so-called sharpening steel–also called a honing rod–which is the metal rod sold with most knife sets, doesn’t really sharpen a knife, but rather hones the edge of a slightly dulled blade."
Mr Johnson, we have a problem here......

-
@ReamerPunch said:
Nothing says 'bushcraft' more than a bowdrill fire.
I'll keep an eye for the other parts, and give it a go.Use a wooden coat hanger. Just remove the metal bits first.

-
@Alan K. said:
Use a wooden coat hanger. Just remove the metal bits first.
I don't have any. I'll look for a branch for my bow. It's the easiest part to make, so I'll go au naturel for the bow.
-
@old Lefty said:
Day 1:
Test run of making kindlings with Corvid:

Welcome aboard!

Why don't you have the Axe Challenge badge?
Have you requested it from the badge list? -
@Nix said:
I think it is confusing because people use the terms differently. I think I use 'honing' and 'sharpening' the same way you do. However, I've heard people say they use a steel to 'sharpen' a knife. (True, the knife is sharper after being steeled.) And I've heard people say they 'honed' an edge on whetstone....which to me was always 'sharpening.'At this point, it's a semantics issue. **I did a quick check of an online dictionary. Merriam-Webster for Hone: "to sharpen or smooth with a whetstone". They seem to feel honing and sharpening are used interchangeably. **
Cook's Illustrated: "A so-called sharpening steel–also called a honing rod–which is the metal rod sold with most knife sets, doesn’t really sharpen a knife, but rather hones the edge of a slightly dulled blade."
Mr Johnson, we have a problem here......

Yeah, but what do they know.
Like AK I've always thought, and been brought up to believe, that honing is realigning the tiny serrations and not the same as sharpening which removes stock and produces new micro-serrations or whatever you want to call them.

-


Use the GB Wildlife hatchet to crack open a coconut. I used to chop into the young coconut with brute force, using either a big blade or axe, to cut a square and crack open the coconut. But lately I did some quick research on internet, and turns out I could first remove the husk and to pry the coconut at a weak point to open a perfect hole on top. I will try to open more coconuts in the next few days with my fixed blade and my SAK(don't know whether that's feasible, but worth it's trying) :D
Now that is cool!
Lähetetty minun SM-T515 laitteesta Tapatalkilla
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


