The Nessmuk Challenge
-
@ReamerPunch said:
That's a child car-seat clip I cut off a seat. The clip is fantastic. And the strap is also quite useful.
Here's the clip I have on my belt, with a belt keeper. I hang my keys from it and they dangle into my pocket.

Heck of an idea and a great looking clip at that. -
**Day 15:
**
Another smoky day..... Harsh enough to bother my eyes and nose when outside for a while. So not much going on for me. I was out watering some veggies and noticed that some of my beet leaves were diseased. I used the FX's main blade to trim away the affected leaves.....but didn't have a camera with me....Adventure Boy agreed to be bribed to pose with the FX shortly after it got used:

-
Hey!

-
@Nix said:
**Day 15:
**
Another smoky day..... Harsh enough to bother my eyes and nose when outside for a while. So not much going on for me. I was out watering some veggies and noticed that some of my beet leaves were diseased. I used the FX's main blade to trim away the affected leaves.....but didn't have a camera with me....Adventure Boy agreed to be bribed to pose with the FX shortly after it got used:

Mrs Geared was walking past when I refreshed this thread, verbatim:
"Oh look at him! Such an angelic face, that's a good booooy. Ask him what breed he is, go on ask him"
So errr, Nix, what model is that Adventure Boy

-
Day 15
Moose in a pile of Osage flint. The reddish colored flint is the Osage flint after its been heat treated. I needed a bigger piece of flint to put in my fire makin kit. Was going to sort through this flint and find a nice piece but then......................I went for a walk out at Knebler pond and in the trail was this piece of flint that was just the right size and shape to fit in my kit. :D
-
no flint round these parts but i do remember as a kid striking quartz and making sparks, flint sparks a lot easier thoughDay 15

-
Nice find, David!

Great trio shot, Borg!

-
@GearedForwards said:
Mrs Geared was walking past when I refreshed this thread, verbatim:"Oh look at him! Such an angelic face, that's a good booooy. Ask him what breed he is, go on ask him"
So errr, Nix, what model is that Adventure Boy

Technically he is a Border Terrier.
The breed was developed in the Borders region of Scotland for doing the kinds of stuff that terriers do. (They sometimes get breed into Jack Russel lines.)
This one.....hmmmm.....I think may have been assembled from spare parts....

-
Sometimes those are the best kind Jack ;)
-
He's a good looking dog!

-
I'm glad Adventure Boy is feeling better.
-
Who's a good boy?

-
Day 16
I finished my slingshot.

I used shock-cord, gorilla tape, my Yamaha Heavy Duty Pocket Driver with a 1/8" drill bit, and the Rebar.
For the pouch, I used a 3.5" piece of gorilla tape tripled over. I made holes with the reamer. I cut two 30" pieces of shock-cord, which attached to the pouch with a lark's head knot. I drilled two holes in each arm, threaded the cord through, and tied friendship knots. Some minor adjustments to get the two shock-cord loops the same length, to have the pouch in the middle, and it is ready. I have very few steel ball bearings, so I'll have to buy more, or just find small round-ish pebbles, or use glass marbles.



Thoughts:
-This was tons of fun.
-My pouch should be 4" to allow larger projectiles.
-The two holes for the shock-cord should have been closer to each other.
-I used shock-cord loops to get two lengths on each arm, for more stability, since I did not use flat bands.
-If you go this route, drill holes that match the shock-cord. Too big holes, and you'll get too much clearance. 1/8" holes for mine are perfect.
-Drill the holes carefully, at the right angle and orientation, and running parallel to each other. Go slow.
-Cut longer bands than you need. You can always make it shorter and trim it down.
-If you make the pouch/seat out of Gorilla tape, do not use too many layers. You do not want it too stiff.
-I tripled over the gorilla tape while having it on a table. When it was finished, it sat flat, so when I bend it to house a projectile, it makes a crease in the middle. When making a gorilla tape pouch, make it by curving the tape around a bottle or another cylindrical object, so that when the pouch sits idle, it is naturally curved.
-Do not make the pouch holes too big. It will unnecessarily weaken the pouch when you draw.
-Do not make the holes in the pouch too close to the edge. The bands may rip through it.
-When removing the bark, the grip will become slightly narrower. Use a Y branch that fits your hand, or that is a little larger. Remove the bark and just sand it down until you are comfortable holding it.
-When you first test it, make sure you have tied the bands and pouch properly, and wear eye protection. -
Wow. That's a great looking sling!

Nice work.

Test fired yet?
-
I shot a couple of stones. Not too bad. Marbles or bearings would be better. I'll go later today to give it a go.

-
I decided to remove the crease that forms in the middle. I used the Rebar package opener, and stuck a new piece of Gorilla tape, which I curved, to get the pouch to stay curved.

If I find another nice fork, I'll make another slingshot, but with flat bands and a better pouch.
-
Day 15. First of all, I cut my fingernails with the scissors. No photo.
Sawed a stick to length. Any good sturdy stick I find laying around the farm gets turned into a walking stick.
<a href="https://flic.kr/p/2jH3N61" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50347635962_d1d70fdef7_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>KIMG2180 by cody6268, on Flickr
I found I somehow got a sliver of metal or something in my finger, so I deployed the mag lens and tweezers and got it out. Part of me wishes I'd started with a pliers-based tool when I did this challenge, but having the mag lens and tweezers on me at all times is far more convenient. At least an SAK was better than the blade-only 90 year old relic I was originally gonna use for this challenge.
<a href="https://flic.kr/p/2jGYqKp" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50346783733_3c1c75ba0f_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>KIMG2181 by cody6268, on Flickr
-
I set up a target, and from about ten meters away, out of 23 shots I think, I completely missed the towel 3 times, and hit the target maybe 5 times. I lost three marbles.

I do not have much power because shock cord does not have the stretch that proper slingshot bands would have, and even with perfectly spherical ammo, I cannot hit the target consistently. I missed a lot. Of course, this was the first target practice, so I may improve. Still, there are many issues that throw off my aim.
This video is very boring, so be warned.
-
Great start, though.

I find it helps my aim to use an anchor point (cheekbone) for my release hand.
And, now we know the rumors are true....RP has lost his marbles......

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

