The Nessmuk Challenge
-
Fantastic work everyone!
I think Nessmuk would have greatly appreaciated multitools as a knife substitue, partially because it would give him a folding saw of decent capability

-
Day 19
-
Day...19:
Time is flying by! :ahhh
Less smoke today...because we got rain, drizzle, more rain, and drizzle......

I have a tarp that I haven't used yet. I took the rainy day to modify some tent pegs by adding longer loops. You guys know I like my pegs pre loaded with XL loops--gives me options. Also made some guys lines to keep in the tarp's stuff sack. Again, It's nice to have some bits and pieces pre-cut, loops tied in one end, just to make setting up a tarp a bit less of a fuss.
The 'muk did awl the cutting work with ease. Since it is already on my belt, it always close at hand and ready to use.

I'll see if I can get this tarp out on the trail soon.......
-
-
Day 19
I do like the idea of a smaller fixed blade knife for EDC if it isn't a problem with the law or work rules. I am really enjoying the Frosts Little Black Talon for this use. It is what I consider an ideal size for an EDC fixed blade with a 3 inch or less blade length and about 4 inches of handle. I have carried others but some have been less convenient or uncomfortable to carry. I have seen many carry an ESEE Izula or Izula 2. Seems a good size. Anybody have other recommendations? I try to avoid anything that looks or feels too military/tactical for my tastes. So far I haven't found anything that works better than the Mora classic type knives for general purpose EDC but it would be nice to have something that could fit in a back pocket scabbard paired with a multitool and the Izula does that well. I have been carrying the Little Black Talon and Victorinox Spirit in my back pocket instead of dangling from my belt for the last week, because I never did like stuff on my belt. Anything on my belt somehow always gets in the way. -
Day 19: did some yard work.
<a href="https://flic.kr/p/2jJgRE2" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50361500921_d0b535f22c_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>KIMG2219 by cody6268, on Flickr
-
Alan, I've got several fixies in that size range.
Scott Gossman makes a few--or he'll make just the knife you want. Same with Matt Lesnewski. Matt's knives are very handmade and he has an old-fashion, frontier style. I love 'em. But what really sets them apart is their incredible edge geometry and sharpness. I've got a couple ML knives and can't say enough good things about his work.
On the less expensive side, I really like the BK-11, shown here against an Izula:

Also pictured above is a custom Wissahickon....I forget the model....'Muskrat' or something. I picked this one up on a whim...and found I really like it. 3" blade, scandi grind, 1095. But for me, the big selling point is the full, well-rounded handle. I don't recall what I paid for this one, but it was not too expensive. (I might have gotten it when the maker was younger and starting out.)
Sometimes customs seem expensive, but these guys are making some great and practical knives that fill a few niches the big makers don't cover. Keep your eyes open and you might find a perfect knife for you.
Now I'm looking at some of Matt's models......oooooh.......

-
Day 11:
Early start, can’t quarantee a result, but there will be noise:

Sent from my iPhone using Tapatalk
-
I like the lens, that's the real deal!

Time is flying by! :ahhh
Less smoke today...because we got rain, drizzle, more rain, and drizzle......

I have a tarp that I haven't used yet. I took the rainy day to modify some tent pegs by adding longer loops. You guys know I like my pegs pre loaded with XL loops--gives me options. Also made some guys lines to keep in the tarp's stuff sack. Again, It's nice to have some bits and pieces pre-cut, loops tied in one end, just to make setting up a tarp a bit less of a fuss.
The 'muk did awl the cutting work with ease. Since it is already on my belt, it always close at hand and ready to use.

I'll see if I can get this tarp out on the trail soon.......
Looking great! I like the little pick pull is made of bright colors, so no one tripping over it. :D
-
@Borg said:
the blade doesn't really weigh anything, easy enough to make the saw from wood you find and you already have string to tension it, sounds good to me 
Day 19


@Alan K. said:
Day 19
I do like the idea of a smaller fixed blade knife for EDC if it isn't a problem with the law or work rules. I am really enjoying the Frosts Little Black Talon for this use. It is what I consider an ideal size for an EDC fixed blade with a 3 inch or less blade length and about 4 inches of handle. I have carried others but some have been less convenient or uncomfortable to carry. I have seen many carry an ESEE Izula or Izula 2. Seems a good size. Anybody have other recommendations? I try to avoid anything that looks or feels too military/tactical for my tastes. So far I haven't found anything that works better than the Mora classic type knives for general purpose EDC but it would be nice to have something that could fit in a back pocket scabbard paired with a multitool and the Izula does that well. I have been carrying the Little Black Talon and Victorinox Spirit in my back pocket instead of dangling from my belt for the last week, because I never did like stuff on my belt. Anything on my belt somehow always gets in the way.Alan, I am totally in the same boat looking for the same kind of knive, but do give me two more days, a package is enrouted to me so to speak, and I would like to suggest those knives to you if that fits the bill.

@Nix said:
Alan, I've got several fixies in that size range.Scott Gossman makes a few--or he'll make just the knife you want. Same with Matt Lesnewski. Matt's knives are very handmade and he has an old-fashion, frontier style. I love 'em. But what really sets them apart is their incredible edge geometry and sharpness. I've got a couple ML knives and can't say enough good things about his work.
On the less expensive side, I really like the BK-11, shown here against an Izula:

Also pictured above is a custom Wissahickon....I forget the model....'Muskrat' or something. I picked this one up on a whim...and found I really like it. 3" blade, scandi grind, 1095. But for me, the big selling point is the full, well-rounded handle. I don't recall what I paid for this one, but it was not too expensive. (I might have gotten it when the maker was younger and starting out.)
Sometimes customs seem expensive, but these guys are making some great and practical knives that fill a few niches the big makers don't cover. Keep your eyes open and you might find a perfect knife for you.
Now I'm looking at some of Matt's models......oooooh.......

I first heard of ML knives from Nix, and when I checked on his page today, that's the first thing that catch my eyes too. :D
-
Making a comfortable handle is half the skill to making a knife. It's nice to have something that fits comfortably in your hand. The Wissahickon looks good. It surely does.
-
Day 20
Did some splitting and carving. Got a nice piece of fatwood, and also a hearth board.

-
@Alan K. said:
Making a comfortable handle is half the skill to making a knife. It's nice to have something that fits comfortably in your hand. The Wissahickon looks good. It surely does.Yes, and I am with you on the length on blade and handle. I actually have a set of magic numbers for EDC fixed blade that I like to adhere to, "2,3,4"--2mm blade(think Mora), 3" blade length and at least 4" handle.
@ReamerPunch said:
Day 20Did some splitting and carving. Got a nice piece of fatwood, and also a hearth board.

This is going to be good!
:D -
I also made a mini fishmouth spreader. Less weight, less bulk, works just as well.


-
@ReamerPunch said:
I also made a mini fishmouth spreader. Less weight, less bulk, works just as well.

That's another good one!
-
Day 20

Mrs. found me strangely enthusiastic about helping with the grocery unboxing, and this is the reason why! Seriously, half of the world problem can be solved with popcorn or bacon grease. :D -
Dutch ovens are great for making popcorn.... Just sayin'...... :D
-
@ReamerPunch said:
I also made a mini fishmouth spreader. Less weight, less bulk, works just as well.

How much weight does that hold?

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

