The Nessmuk Challenge
-
^
Westside's Conjugate systems Max Effort.
An all out push in a particular weekly changing lift/variation. Done once a week for lower and once a week for upper body.Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
Day 26:
Outdoorsy pic for this lovely gray saturday and some cold cuts for lunch



Sent fra min FRD-L09 via Tapatalk
-
@Alan K. said:
Day 25
I've got a tree stump that just wont die. About once a month I have to knock down a bunch of fresh shoots coming out of it. The Tramontina machete works good for that.Good use!

@ReamerPunch said:
Day 26The Paiute Deadfall

Having everything ready made this easy. Two sticks from the Figure Four, and the cord and toggle from the Y Bone. The only thing missing was a twig for a bait stick.
This was a lot of fun. The bait stick holds the toggle, which holds the line, which holds the lever stick, which holds the weight on the post. Thank you, Physics.


And a ginger beer

Another day, another cool trap. RP, which one so far do you think is most effective and easy to setup?
:DOutdoorsy pic for this lovely gray saturday and some cold cuts for lunch


Sent fra min FRD-L09 via Tapatalk
Nice walk and

-
@comis said:
Another day, another cool trap. RP, which one so far do you think is most effective and easy to setup?
:D

Well, let's see what we have here.
-Spring-loaded snare
-Figure Four
-Promontory Peg
-Y Bone (Paiute variation)
-PaiuteSnare
All are deadfall traps except the snare, so the snare is either the best or the worst. I'd say that you'd want to be more particular about where you set the snare. Not that you should set up the deadfalls anywhere, but you could. Considering the fact that you need two cords for this, and a suitable spring-pole, and a game-trail to set it in, I'd say that this is not the easiest to set up.For the deadfalls, the Promontory Peg would be the easiest to set up. Find a stick, saw two opposite cuts, and snap it in two. Clean up the cut a little, find any toggle to tie the cord, and you're done.
The Figure Four takes a lot of fiddly carving to get right, in addition to being mindful of the length of the sticks.
The Paiute and Y Bone would be better than the Figure Four, I'd say. Easier to set up, and more reliable to trigger and get you dinner. The Y Bone takes a lot more carving than the Paiute but is much more stable thanks to the Y, which also makes it extremely easy to set up.So, in order of easiest to hardest, it would be
-Promontory Peg
-Y Bone
-Paiute
-Figure Four
-Snare -
I think the Paiute has the best trigger. Or, atl east it seems the easiest for me to tune/adjust.

-
I liked setting up the Paiute.

It seemed a little too fiddly to start with that one. The Y Bone is essentially a Paiute with a Y. It is easier to set up, but once done, it is a Paiute. There is a reason the Paiute is more popular than the Figure Four. -

Well, let's see what we have here.
-Spring-loaded snare
-Figure Four
-Promontory Peg
-Y Bone (Paiute variation)
-PaiuteSnare
All are deadfall traps except the snare, so the snare is either the best or the worst. I'd say that you'd want to be more particular about where you set the snare. Not that you should set up the deadfalls anywhere, but you could. Considering the fact that you need two cords for this, and a suitable spring-pole, and a game-trail to set it in, I'd say that this is not the easiest to set up.For the deadfalls, the Promontory Peg would be the easiest to set up. Find a stick, saw two opposite cuts, and snap it in two. Clean up the cut a little, find any toggle to tie the cord, and you're done.
The Figure Four takes a lot of fiddly carving to get right, in addition to being mindful of the length of the sticks.
The Paiute and Y Bone would be better than the Figure Four, I'd say. Easier to set up, and more reliable to trigger and get you dinner. The Y Bone takes a lot more carving than the Paiute but is much more stable thanks to the Y, which also makes it extremely easy to set up.So, in order of easiest to hardest, it would be
-Promontory Peg
-Y Bone
-Paiute
-Figure Four
-Snare

-
Day 27

Get the Ranger to pose while taking a stroll, I don't know why but there are really more than usual amount of people hiking the trails. I'd love to post with my axe and fixed blade more, but not with dozens of people watching over my shoulder.
-
Day 26:

The FX awl--which looks like it needs to be cleaned up a bit--used to open a parcel!

-

Get the Ranger to pose while taking a stroll, I don't know why but there are really more than usual amount of people hiking the trails. I'd love to post with my axe and fixed blade more, but not with dozens of people watching over my shoulder.
Lovely pic comis

Sent fra min FRD-L09 via Tapatalk
-
Nice work everyone
Day 26 more tyre fun

-
:ahhh Stop running over knives!!! :ahhh
-
Day 26
It is another gray and dreary day. Only the Chamber of Commerce still calls this "Sunny South Florida."

Here's the Spirit and the Little Black Talon with a cup of coffee.
-
Slow day for me, too.

-
Day 26
-
Nothing much. Except, I forgot, my grandmother put wood screws in the feed box lid to keep the bear from getting in it.
Thus, I had to remove and reinstall the screw
The right side didn't have a screw in where it should have been, so I relocated it. 91mm don't look that tough, but it took the job really well. I actually blew apart a current-production Antonini 100mm Farmer's Knife clone doing this job 2-3 years ago. Been meaning to redo the pins and wood handles for some time now. Really need to get at it. I'm going with a domed head over the "bird's eye" for strength.
<a href="https://flic.kr/p/2jLzAGP" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50387595631_2aa3d6a6c4_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>KIMG2314 by cody6268, on Flickr
-
Day 27
Third attempt at the bowdrill fire.
I have made some further improvements. Or so I thought.
The bearing block and spindle were a perfect fit, with a nub and hole. This was not ideal. The nub wore away, and the spindle had too much friction against the bearing block. To counter this, I tapered the spindle to fit into a cap nut. It was a little too thin to withstand the pressure, and it snapped after twenty seconds. It had very little friction and I got smoke, so it is not bad. If the cap nut was a little wider, the spindle point would have been more robust.I also scored grooves along the length of the spindle, to make the cord bite into it. My spindle was a polished broom handle, so it was quite smooth. I scraped it with my Mora's spine, but it was still smooth enough not to move some times when pressing down on it and working the bow. Scoring along the length of the spindle helped, but not that much. Spinning made the cord compress the grooves, which made the spindle smooth again. The cord is also not that rough, so I may need to replace that as well.
I put a steel wire loop in the middle of the bow to hold the spindle in place. It makes it easier to get in position without fumbling to get everything together.
The cap nut idea has some merit, so I am not done with it. I have to re-tighten the cord and score the spindle along its length again.

I also found another car seat clip with some seat belt length.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


