The Nessmuk Challenge
-
@ReamerPunch said:
Day 30Removed the magnets from earbuds.

Most seem to have some seriously strong magnets in them, and since well, they're useless when the connections go bad about every 6 months to a year. Surprisingly though, since I haven't left the house that much, and not taking them with me as much, they're lasting longer. My current pairs--1X VE Monk 1X Edifier H15 are getting close to a year old.
My "old" Monk earbuds I haven't thrown out yet. That reminds me to do what I always do before I chuck earbuds. Use the pliers, crush them open, and remove the magnets.
-
Day 29, used the scissors to cut paracord to mount a lanyard to a new old-school incandescent light. I mostly use these around the house, as I seem to be mildly blue-light sensitive, and for just going to the bathroom, they're not blindingly bright. And so heavy and long, hard to lose. The cord tip comes from old elastic shoelaces. I have went back to traditional laces I have to tie. Lock Laces are too much of a pain in the backside. Laced right, traditional shoelaces don't come untied nearly as much.
Also, I used the fish scaler to try to reset a GFCI outlet in the bathroom. Did troubleshooting--not the outlet, not the breaker. So, it's the wiring. But, it's not what I've been lecturing my folks about--this wiring is only 12 years old. So, who knows what's going on. I fear bodge job when the remodelling was done 12 years ago in which the bathroom was enlarged by taking out a closet from a second bedroom (and the remainder of that room merged into mine). My folks are calling an electrician tommorow.
<a href="https://flic.kr/p/2jMzZN9" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/50398989808_b109954b13_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>KIMG2323 by cody6268, on Flickr
-
Congratulations with the bow RP, you've been really persistent and seeing your progress is inspiring!

Another great trip with fantastic food Nix, just had dinner and you made me hungry

Two requests though!
-
Can we see what the inside of the trailer looks like?
-
You have to keep us updated on trips like these outside of Spetember

-
-
I'll try to grab a couple of shots of the Chuck Wagon for ya. Pretty simple really. :D
-
Nice camping pics Jack !

-
I love those micro trailers. Me thinks it needs to have some suspension added and bigger tires under it so it can go off trail behind the old 4x4. At least you could sleep soundly without worrying about coyotes nipping at your toes.
-
Day 22
(I checked my earlier entries and noted that I had marked 4 twice):
Getting the fireplace online, winter is coming:


Chimney sweep came by and fireplace is now ready for usage. Doing some kindling for that with CorvidSent from my iPhone using Tapatalk
-
Day 30:
So the challenge didn't go quite as I had hoped but I knew that going in(still had hope though). Sorry for my boring participation, but that's life sometimes...
No use for hatchet or fixed blade, but my trusted Rebar did great
Thanks for an entertaining challenge guys, lots of great pics, projects, trips and tools

Sent fra min FRD-L09 via Tapatalk
-
Day 30

I felt like I haven't used my axe enough throughout the challenge, and so started a new seasoned wood spoon carving with the axe. This is my first time doing any spoon carving, and let me tell ya starting with a seasoned hard wood could be a total mistake. After an hour or two of chopping and chipping, finally I get a blank that remotely resemble a spoon. Meanwhile, I am wondering whether I could finish the project with my Trio or should I just wing it with power tools.
I would like to use this chance to thank you everyone wholeheartedly for participating in this challenge, what a blast!
So many memorable pictures and outings, some of us have gone out of the way to do many Nessmuky things, bushcrafting, camping, hiking, and it motivated all of us to get up and out, even just for a nice stroll. Too bad it's been raining non stop for me, but I really do get a kick out of all your photos and uses, and it did inspire me to do more with my tools! 
In terms of the trio, I still wonder whether if Nessmuk is around, will he be a true ultralight hiker/camper and trying cut loose all the heavy tools, or will he be a bushcrafter and trying to adhere to the old ways of things? Nonetheless, if I am not hiking for a long distance to camp, I think I would really enjoy carrying the Trio or even more tools, just because nothing gives me more pleasure than playing with all these tools while in the great outdoors. :D
-
@ReamerPunch said:
Tough to say.
Most divots on handles that I've seen are just divots in micarta. That'll ruin the handle over time, even if you use wax or whatever. There are ones with metallic divots, which would be better, but then again, how would that affect ergonomics?
One might argue that if you have something on the knife for fire making, have a ferro rod instead of a divot, but the divot is still useful. I'd like to practice the bowdrill once I get a flame. It would be nice to have a bearing block build into my knife.
So, I'd say yes, why not.

Even if it is just a divot in micarta. As long as ergonomics are not ruined, why not have a little divot to be able to practice the skill?I think it could be nice additional feature to the handle if done nicely, and what you did with the coin is exactly what I meant in an earlier post. Just took a picture of a knife I owned with the metal divot pre-installed, hope this could be of reference.

Personally, I think this method is more desirable than just a divot in micarta, which will probably get burnt very quickly. But using a knife handle with divot is just really handy, one less thing to worry about when wanting an impromptu practice. :D
-
@comis said:
I think it could be nice additional feature to the handle if done nicely, and what you did with the coin is exactly what I meant in an earlier post. Just took a picture of a knife I owned with the metal divot pre-installed, hope this could be of reference.
Personally, I think this method is more desirable than just a divot in micarta, which will probably get burnt very quickly. But using a knife handle with divot is just really handy, one less thing to worry about when wanting an impromptu practice. :D
Yes, that would be nice, and I am sure ergonomics are just fine. Especially if someone is new to bowdrilling, the built-in divot is a nice way to practice.
-
-
Nice one Nix 
Day 30

-
Day 30:
It only seemed right for me to finish the challenge out in the woods.
(OK, technically there are still a few hours left, and, yes, I’ve got my trio with me…..but this is my final entry post for the challenge.)
I headed out to a local trail for a day hike. I’ve been out on this trail during this challenge already, but I love hiking back here. And today just happened to be one of those perfect days to be out in the woods: bright skies and 50º US (10ºC) with a light breeze.
The kind of day that demands some trail time!

The trail starts out fairly well worn, but then divides up and becomes better.
Good views from higher up:

Naturally I found my way on to a deer track:

Which led to a nice spot to look around and contemplate my trio for this Nessmuk challenge:

The trio:

I feel pretty good about this trio of tools.
Having said that, I don’t think—given my activities this September—that I needed all of their capabilities.
I don’t think I really needed more than the FX. Perhaps if this had been a single knife “Woodcraft and Camping” challenge, I might have selected my Outrider. Even so, the FX could have handled most, if not awl, of my tool chores for this challenge.
On the other hand, I’m still a kind of fixed blade guy. A solid knife is a great tool and very reassuring to have along. I just feel a bit more confident with a fixie on my belt. Probably either the Nessmuk or Kukri could have filled this role for me. But the Nessmuk has better steel and takes a better edge…..so the nod goes to the ‘muk.
Nevertheless, the kukri performed really well. For a big, heavy knife, it proved to be remarkably agile and easy to use. I think the steel is relatively soft, but the kukri took a good edge and held it well. The edge on this one is now convex, which may help with edge retention.
I’m not sure that I prefer the Kukri to a small axe or hatchet, but it did perform some tasks, e.g. gathering bunches of grass for tinder, that an axe wouldn’t be suited for.
Overall, a very versatile tool. Easy to carry on a belt (or piece of rope). Probably not as much pure chopping power as a small axe, but pretty darned close. I didn’t feel disadvantaged with my kukri.
The Nessmuk knife is a great design. Ungainly to be sure, but it too proved to be versatile from scraping to scooping to cutting and slicing. The thin blade proved to be really useful and it is still hair-popping sharp. Possibly a ‘one-knife’ solution. A really useful tool.
The Victorinox FX was my most used tool. #becausemultitool. With so many useful tools in one, it was clearly the most obvious choice for so many tasks. In my mind, it was the one tool I would not have wanted to do without.
There was a bit of overlap between the three, but in general, each tool seemed to have a place and a purpose.
I think Nessmuk had a good system!
Back on the trail…..mostly….

I noticed my shadow and took a ‘Self-portrait in Pine Needles’:

Heading home, as the challenge comes to a close, one last look back into the hills, the 'green nooks' where we can rest and restore ourselves the way Nessmuk cherished so much.

-
Day 30
After work went for a walk thru the cottonwood trees. It was a beautiful day to be out. Excellent challenge and I enjoyed everyone's trio's and pics.
-
Beautiful countryside you have Nix

Loving that double bit David

-

And that Randall.........

-
I think David wins in the Category of "Most Authentic Nessmuk Trio."

-
It only seemed right for me to finish the challenge out in the woods.
(OK, technically there are still a few hours left, and, yes, I’ve got my trio with me…..but this is my final entry post for the challenge.)
I headed out to a local trail for a day hike. I’ve been out on this trail during this challenge already, but I love hiking back here. And today just happened to be one of those perfect days to be out in the woods: bright skies and 50º US (10ºC) with a light breeze.
The kind of day that demands some trail time!

The trail starts out fairly well worn, but then divides up and becomes better.
Good views from higher up:

Naturally I found my way on to a deer track:

Which led to a nice spot to look around and contemplate my trio for this Nessmuk challenge:

The trio:

I feel pretty good about this trio of tools.
Having said that, I don’t think—given my activities this September—that I needed all of their capabilities.
I don’t think I really needed more than the FX. Perhaps if this had been a single knife “Woodcraft and Camping” challenge, I might have selected my Outrider. Even so, the FX could have handled most, if not awl, of my tool chores for this challenge.
On the other hand, I’m still a kind of fixed blade guy. A solid knife is a great tool and very reassuring to have along. I just feel a bit more confident with a fixie on my belt. Probably either the Nessmuk or Kukri could have filled this role for me. But the Nessmuk has better steel and takes a better edge…..so the nod goes to the ‘muk.
Nevertheless, the kukri performed really well. For a big, heavy knife, it proved to be remarkably agile and easy to use. I think the steel is relatively soft, but the kukri took a good edge and held it well. The edge on this one is now convex, which may help with edge retention.
I’m not sure that I prefer the Kukri to a small axe or hatchet, but it did perform some tasks, e.g. gathering bunches of grass for tinder, that an axe wouldn’t be suited for.
Overall, a very versatile tool. Easy to carry on a belt (or piece of rope). Probably not as much pure chopping power as a small axe, but pretty darned close. I didn’t feel disadvantaged with my kukri.
The Nessmuk knife is a great design. Ungainly to be sure, but it too proved to be versatile from scraping to scooping to cutting and slicing. The thin blade proved to be really useful and it is still hair-popping sharp. Possibly a ‘one-knife’ solution. A really useful tool.
The Victorinox FX was my most used tool. #becausemultitool. With so many useful tools in one, it was clearly the most obvious choice for so many tasks. In my mind, it was the one tool I would not have wanted to do without.
There was a bit of overlap between the three, but in general, each tool seemed to have a place and a purpose.
I think Nessmuk had a good system!
Back on the trail…..mostly….

I noticed my shadow and took a ‘Self-portrait in Pine Needles’:

Heading home, as the challenge comes to a close, one last look back into the hills, the 'green nooks' where we can rest and restore ourselves the way Nessmuk cherished so much.

What a beautiful day for hiking! And that shadow in the ground did remind me of someone--

Though you look way taller than him. :D
@Nix said:
I think David wins in the Category of "Most Authentic Nessmuk Trio."
He sure did!

-

Nix has so kindly provided the last day of quote from the ending of Nessmuk's "Woodcraft and Camping", thank you!
And if anyone wants to read it, you could find a digital copy online here. It's a quick weekend read, and though the tech is very different nowadays, everything else is still very relevant till this day:
https://www.gutenberg.org/files/34607/34607-h/34607-h.htm
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
